miracle m M200 Wireless Portable Karaoke Speaker User Guide

M200 Wireless Portable Karaoke Speaker
User Guide

This device has completed a conformity test for business use, and radio interference can occur when used for family use.
Please read this manual carefully and follow the directions.
Please keep this manual for future use.

Information for initial use

1. Battery requires full charge when first used to maintain optimized battery capacity.
2. C-Type charger with up to 1.8A is required for charging.
3. When the battery is being depleted, the battery and circuit protection function is activated. It will lower the volume to the base level or shut down the product. You can continue to use this device when the battery is depleated by connecting to the charger.

How to Use Summary

1. Power ON : Press and hold the Power button. The product powers on when LED is activated and guide sound commences.
   (You can power on with the remote controller when connected to the charger)

2. Connect Bluetooth: You can connect with the Bluetooth function on your smartphone. (See related page)

3. Play Music: You can play music by running smartphone applications.
   Adjust volume: You can adjust volume and echo with a remote controller or button on the speaker unit.

4. Connect MIC: The MIC connects to the speaker automatically when the speaker turns on. (If your speaker connection fails to auto-connect, you can re-connect with a different frequency.)

5. Dual MICs: You can use dual MICs by powering on MICs separately. (It can also be used for a lecture.)

6. Power OFF: Press and hold the power button on the remote controller or main unit.

7. Use AUX cable: You can deliver external or internal sound with Aux cable.

8. Charge: You can charge the speaker main unit with a C-type charger connected to the product. (only a 1.8A or above charger is required.)

9. Various use: This product has many features, such as singing, lecture, meeting, or small talks.

10. Smartphone application compatible: the product can be used for playing music or sound effects with various Smartphone applications.

11. MP3 playing with USB memory stick: You can play MP3 files contained in the USB memory stick.

Charging the product

• The battery is embedded in the speaker main unit. The MIC uses AA-type batteries.
• Please full charge the product when first used since the product has not been fully charged when manufactured.
• You should turn the product off during charging for the proper charging process.

Required time to charge
Approx : 1.5 ~ 4 hours
(It depends on battery balance or charger capacity)
Operating time
Approx: 1.5 ~ 4 hours
(It depends on battery balance, volume, and MIC usage)

1. The product should remain off when charged for the faster-charging process.
2. Connect C-type charger to the charging socket. (Charger not included in the product package)
3. Charging will begin when the battery balance display on the LED screen gradually blinks.
4. All three blocks on the battery balance display on the LED screen will show when fully charged.
5. It takes Approx. 1.5 to 4 hours to be fully charged. Blinking LED will stop when fully charged.
6. You can use 1.5 to 4 hours continuously after fully charged.

※ Display battery charging balance: Approx
※ Time required for charging is subject to battery balance/charging method/charging circumstances.
※ The battery circuit protection function can be activated when the battery balance is lower than 60%.

Caution

• ·The audio feedback effect can occur if you use the MIC and speakers too close to one another.
• When using the Bluetooth function, the distance between devices should be less than 10m.
• Keep out of reach of children or animals and do not use in humid conditions or when in water. (ie: hot tubs, pools, bodies of water)
• Dropping the product could cause severe damage or malfunction.
• Use the product near heating equipment, fire or other hot items could cause severe damage to the product.
• Please maintain a temperature between -10~40˚C when charging the product.

How to use MIC

Turn on the MIC & LED display information

1. Press and hold the power button on the MIC to turn on the MIC.
2. The frequency channel is automatically connected with the LED screen on the MIC turns on. (You can change the channel when the channel shows as  OFF or there is no sound output)
3. The MIC has connected accordingly if the connected channel is displayed on the LED screen and the ‘A-ON’ letter is displayed on the LED screen of the speaker.

Battery not included in the product

How to change the battery in the MIC

(Two(2) AA-type batteries required per product)

1. You may open the battery insert part by turning the bottom side of the MIC.
2. Put AA-type batteries into each side as described in the figure on the left and close the cover.

How to change the frequency channel

1. ‘SEL’ blinks when press and hold the SET button on the MIC.
2. You can move to the next channel every time you press the SET button.
3. If you stop at the channel you like, the channel is automatically selected and it attempts to connect.
4. When the connection is successful, sound outputs after the channel number on the
5. MIC display fixed and ‘A-ON’ display is shown on the LED display on the MIC.

CHANNEL NUMBER
Blue MIC: A-01~20
Red MIC: B-21~40

Adjust MIC volume

1. You can adjust the volume level by pressing the SET button on the MIC briefly.
2. The volume can be adjusted from level 1 to 6.

Information on upper-status line and channel lock

The battery balance display shows the balance of the battery.
The frequency signal status display shows the communication status between speaker and MIC.
You can use lock feature when you press and hold and together.
*What is Lock Feature? A function to cut off interfering frequencies around the transmission & reception.

How to pair Bluetooth

How to pair Bluetooth (This procedure is developed based on Android Smartphones.)

• Pair The Sing M200 with Bluetooth function on the Smartphone.
• The distance between the speaker main unit and the phone needs to be less than 1M for a good pairing.
• When failed to pair, power off restart the speaker, and repeat the steps above.
• If auto-pairing is not supported for certain Smartphone models, please follow the following steps for pairing.
• If failed to pairing at the first attempt, check pairings with other devices and release all pairings try pairing again.
• If you want to pair with another phone, release existing pairing and pair another phone with the following steps.
• Do not pair devices where there is a warning to electromagnetic radiation such as hospitals or airplanes and where the use of the product is not permitted.
• Noise or abnormal operations can be observed due to obstacles such as a wall or partition.
• When the Bluetooth pairing is disconnected, a confirmation sound occurs.

How to connect Bluetooth(Pairing)

1. Press and hold the power button at the side of The Sing M200 speaker main unit for 3 seconds to power on the system. The Bluetooth connection is in ready status with a confirmation sound.
   (When power is on, the speaker is paired to the most recently connected device.)

2. Push the Bluetooth icon on the Smartphone(Android) to activate the Bluetooth, and find the devices to add.

3. Find ‘miracle, M the Sing M200-Bt’ model in the device list. (Push ‘Find’ button to search the model if the model does not appear in the list.)

4. When connected, a confirmation sound occurs.

5. Press and hold the ‘Power’ button for 3 seconds after use. The product turns off with a confirmation sound.

★Please refer to how to use each device since some devices have different setup procedures.
★ When power is on, the speaker is paired to the most recently connected device.

Information on LED Display on the front side

Information on Buttons on the Remote Controller

You can power on the product with the remote controller when the power is supplied from external suppliers such as chargers or external batteries.

Information on the function of the button on the Speaker

1. : Press and hold – Power ON & OFF / Press briefly – Change mode
2. : Play / Pause
3. : Press & hold – Lower the volume / Press briefly – Play the previous song
4. : Press & hold – Increase the volume / Press briefly – Play next song
5. AUX OUT: Audio output (The sound of the speaker is delivered to the external device)
6. AUX IN: Audio input (The speaker outputs sounds from an external device)
7. USB: USB input
8. DC5V IN: Charging socket
9. Battery reset hole

Playing music with cables

※ When connecting AUXOUT, sound output will be delivered both from internal and external speakers. If you want to have sound outputs only from the external speaker, press ‘AUXOUT’ button on the remote control to mute the internal speaker.
※ Control through the Smartphone directly if the button control to play is not available for the external device when connecting the external device.

Product Component

1. 2 Wireless MIC
2. Speaker main unit
3. Remote controller
4. User’s Guide
5. AUX Cable (3.5mm+3.5mm)
6. Pouch

Specification

MIC : R-R-DOr-Miracle-M900HA
Size / Weight| Product : (W)25cm x (D)9.5cm x (H)6cm / about 980g
BOX : (W)29.5cm x (D)28.5cm x (H)12.5cm / about 2.1 kg
Distributer| (-)E&I–12101- (Doors Korea) / Te1.1566-4520
Yeomgwang na-dong, 27, Mangu-ro 81-gil, Jungnang-gu, Seoul, Republic of Korea

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

ISED Statement

English: This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>