GOLDWOOD TS212 2.1 Multimedia Speaker System User Guide

GOLDWOOD TS212 2.1 Multimedia Speaker System User Guide

Thank you for buying this Theater Solutions System. Prior to first use, please read the manual carefully. If you ever have questions on your system, please contact your authorized dealer and their highly experienced staff be more than willing to help.
PLEASE NOTE: TO PROPERLY CONNECT M 3‹ PC ,GAME CONSOLE ETC,YOU MUST USE THE ENCLOSED 3.sMM TO RCA CABLE.

Package Contents

• (1) Sub-woofer Cabinet
• (2) Satellite Speakers
• (1) Remote Control
• (1)User Manual
• ( I*) 3•5 m RCA Cable

Specifications

• Power Audio : 300 Watts Total System Power
• Drive Units: 2 full range magnetically shielded satellite speakers and powered sub-woofer
• Frequency Response: 40 – 20,000 Hz
• Power Supply: 120V
• Dimensions (W x H x D): Sub-woofer – 7in x 10.5in x 10in
• Satellites – 3.7in x 6in x3in

Features

• 2.1 channel multimedia speaker for computer or home system
• Full audio spectrum performances, ideal for your favorite entertainment such as MPA 3, MPA 4, CD/DVD movies and digital playbacks
• Specially designed woofer cabinet for bass and resolution
• Comes with remote control and g.hmm RCA cable

Using The Remote Control

• POWER/ ST-BY: Turn system on/ off, or stand-by system

• USB: Press to enter USB mode

• SD: Press to enter SD mode

• BT: Press to enter Bluetooth mode and connect a Bluetooth capable device

• AUX: Press to enter AUX mode

•   : Press to play or pause music

• : Press to go to previous track or rewind.

• : Press to go to next track or fast forward

• DISP: Lightness adjustment

• MUTE: Suspend all sound

• EO +/-: Adjust EQ levels

• VOL +/-‹ Adjust the master volume
  0-9 : NUMBERS: Press to select a specific track

• REPEAT: Press once to repeat once, press twice to keep repeating

• RESET: Press to reset all volume controls to factory standard
  Note: if remote loses function, please replace the z AA batteries.

Front Panel

1. LED DISPLAY: Use this to see which mode the system is in

2.    /VOL+ : Press “NEXT/VOL+” once in USB/SD mode to play the next song. In AUX mode press “NEXT/VOL+” to increase the  volume.

3. /VOL- : Press once in USB/SD mode to play the previous song.
   M CD/DVD movies and digital playbacks 4 In AUX mode press to decrease the volume.

4. IR: The remote sensor to receive the window way.

5.  : Press once in USB/SD mode to play or pause the music.
   Press once in AUX mode to mute the music.

6. ST.BY : STAND BY function key

7. INPUT: INPUT function key

Rear Panel

1. AC Power Cord
2. Power ON/OFF
3. Treble Volume Knob
4. Bass Volume Knob
5. AUX Input
6. FL/FR Output
7. USB Port
8. SD Port

System Connections

1. Insert both satellite speaker cables into their respective output sockets located at the rear of the sub-woofer. (FL : Front Left Speaker, FR : Front Right Speaker)
2. For dimensional sound, insert audio cable into respective AUX socket and connect to laptop, game console or mobile device.
3. Once you’ve connected the system in your preferred method, insert the power plug into -z2OV wall outlet and switch power to ON.
   Note: Please avoid leaving magnetic objects near the system

Positioning the Speakers

• *Sub-woofer can po anywhere on the floor of the room (there is no directional requirement for bass effect)
• *FLandFR speakers should be in front of the listener facing inward toward the center

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>