Goldwood DPI-1200C/8 Passive DJ Speaker User Manual

Goldwood DPI-1200C/8 Passive DJ Speaker

Introduction

When it comes to audio, Goldwood is a name synonymous with quality and performance. The Goldwood DPI-1200C/8 Passive DJ Speaker is no exception, boasting a traditional yet powerful design that’s set to amplify your music experience. In this article, we’ll delve into what makes this speaker a go-to choice for DJs, musicians, and audio enthusiasts alike.

The Traditional Powerhouse

The Goldwood DPI-1200C/8 stands as a testament to the enduring appeal of traditional passive loudspeakers. Unlike modern active speakers, this classic design relies on power from an external amplifier or receiver. This setup offers flexibility and customization for those who want to fine-tune their audio setup.

Product Specifications

General Information:

• Brand: Goldwood
• Model Name: Passive DJ Speaker
• Speaker Type: Woofer
• Special Feature: Portable
• Recommended Uses For Product: Compression

Speaker Configuration:

• Configuration: 3-way speaker with tweeter, midrange, and woofer
• Woofer: Deluxe 12″ woofer with polymer-treated cone
• Midrange: 5″ midrange with high-temperature Kapton cone
• Tweeter: 7″ x 3″ tweeter with optimized compression driver

Crossover System:

• Internal Crossover Wiring System: Ensures seamless integration of tweeter, midrange, and woofer

Audio Specifications:

• Frequency Response: 32Hz-30 kHz
• Sensitivity: 92dB at 8 ohms
• Maximum Output Power: 240 Watts

Connectivity:

• Input Connections: Spring-loaded, positive and negative, raw speaker wire inputs
• Output Connections: 1/4″ Jack input and output for daisy-chaining to another passive speaker

Construction:

• Cabinet Material: CARB Compliant MDF wood with grey Aviation Grade Carpet
• Grille: Metal mesh grill
• Protective Features: Protective corners and handles
• Dimensions: 15 x 11.75 x 27 inches
• Weight: 30 pounds

System Requirements

• Any amplifier or home audio receiver with raw speaker wire or 1/4-inch jack outputs
• Power from your amp should be no less than 10 and no more than 500 watts per channel
• Corresponding cable to connect your amp to the speaker

Product Applications

• Mobile DJ or PA
• Live Stage or Karaoke
• Studio Monitor or Home Stereo

What’s in the Box

• 1 Passive Speaker
• Instruction Manual

Product Features

• Traditional Passive Loudspeaker Design: Embraces the classic design of passive loudspeakers, allowing you to power it from an external amplifier or receiver for customization.
• Full Range Sound Coverage: 3-way tweeter, midrange, and woofer configuration ensures a wide spectrum of sound, delivering detailed and immersive audio.
• Quality Speaker Components:
  • Deluxe 12″ woofer with a polymer-treated cone for deep and powerful bass.
  • 5″ midrange with a high-temperature Kapton cone for clear mid-frequency reproduction.
  • 7″ x 3″ tweeter with an optimized compression driver for crisp highs.
• Internal Crossover Wiring System: Ensures seamless integration of tweeter, midrange, and woofer for balanced and clear sound.
• Multiple Input Options:
  • Spring-loaded, positive and negative, raw speaker wire input connections for easy setup.
  • 1/4″ Jack input and output for daisy-chaining to another passive speaker, ideal for larger setups.
• Impressive Audio Performance:
  • Offers a frequency response of 32Hz-30 kHz, covering a wide range of audio frequencies.
  • High sensitivity at 92dB, ensuring that the speaker can deliver loud and clear sound.
  • Maximum output power of 240 Watts for impactful audio.
• Durable Construction:
  • Features a CARB-compliant MDF wood cabinet with grey Aviation Grade carpet for durability and protection.
  • Metal mesh grills protect the speaker components.
  • Protective corners and handles for easy and safe transport.
• Easy to Transport: Dimensions of 15 x 11.75 x 27 inches and a manageable weight of 30 pounds make it portable and convenient for mobile DJs and performers.
• Versatile Applications: Suitable for various applications, including Mobile DJ or PA setups, live stage performances, karaoke, studio monitoring, and home stereo systems.
• 10. Digital Tuned Port: – Includes a digitally tuned port for enhanced bass response, ensuring a well-rounded audio experience.

Product Usage Instructions

Using the Goldwood DPI-1200C/8 Passive DJ Speaker is relatively straightforward, but it’s essential to follow these usage instructions to ensure optimal performance and safety:

Speaker Placement:

• Choose a suitable location for your speaker. Ensure it’s on a stable surface or securely mounted if needed.
• Consider the audience’s position and aim the speaker accordingly for the best sound coverage.

Connection to an Amplifier or Receiver:

• Connect the Goldwood DPI-1200C/8 to your amplifier or home audio receiver using the appropriate speaker wire. Ensure the connections are secure.
• Make sure your amplifier or receiver is powered off before connecting the speaker.

Amplifier Power Requirements:

• Ensure that your amplifier’s power output per channel falls within the range of 10 to 500 watts. Exceeding this range may damage the speaker or reduce its performance.
• Use an amplifier that matches the speaker’s power-handling capabilities for optimal results.

Input Selection:

• If your speaker is part of a larger setup, select the appropriate input source on your amplifier or receiver that corresponds to the Goldwood DPI-1200C/8.

Daisy Chaining (Optional):

• If you have multiple passive speakers and wish to daisy chain them, use the 1/4″ jack input and output on the Goldwood DPI-1200C/8 to connect them in series.

Adjusting Volume and Settings:

• Adjust the volume and audio settings on your amplifier or receiver to achieve the desired sound levels and balance.
• Experiment with the settings to find the optimal configuration for your specific application.

Protecting Your Speaker:

• Ensure that the speaker is placed in a safe location to prevent accidental damage.
• If you are using the speaker in outdoor or rugged environments, take precautions to shield it from moisture and physical impact.

Transport and Storage:

• When transporting the speaker, use the built-in handles and take care to prevent any bumps or drops that could damage it.
• Store the speaker in a cool, dry place when not in use to prolong its lifespan.

Maintenance:

• Periodically check and clean the speaker’s metal mesh grills, ensuring they are free from dust and debris.
• Inspect the speaker’s connections for any loose wires or damage.

Safety Precautions: – Be mindful of the speaker’s weight when lifting or handling it. – Keep the speaker away from water or liquids to avoid electrical hazards.

By following these usage instructions, you can maximize the performance and longevity of your Goldwood DPI-1200C/8 Passive DJ Speaker while ensuring safe and enjoyable audio experiences for your audience.

Troubleshooting

Troubleshooting issues with your Goldwood DPI-1200C/8 Passive DJ Speaker can help you identify and resolve common problems. Here are some troubleshooting steps for potential issues:

No Sound or Low Volume:

• Check Connections: Ensure that the speaker is correctly connected to your amplifier or receiver using the appropriate speaker wire. Verify that the connections are secure at both ends.
• Amplifier Settings: Confirm that your amplifier or receiver is powered on and set to the correct input source. Adjust the volume and settings on your amplifier to increase the sound output.
• Speaker Wire: Examine the speaker wire for any damage or loose connections. Replace the wire if necessary.

Distorted Sound:

• Volume Level: Lower the volume on both the speaker and the amplifier to prevent distortion caused by excessive power.
• Amplifier Settings: Adjust the equalization settings on your amplifier or receiver to ensure that the audio signal is not overdriving the speaker.
• Check Audio Source: Ensure that the audio source (e.g., music player, DJ mixer) is not sending a distorted signal.

Speaker Rattling or Vibrating:

• Check for Overloading: If the speaker is rattling or vibrating excessively, it may be receiving too much power. Reduce the volume on the amplifier to prevent damage.
• Secure Cabinet Components: Inspect the speaker cabinet for loose components, such as screws or panels, that may be causing vibrations. Tighten any loose parts.

Uneven Sound or Imbalanced Audio:

• Positioning: Ensure that the speaker is positioned correctly for balanced sound coverage. Adjust the speaker’s angle or placement if necessary.
• Amplifier Balance: Check the balance settings on your amplifier or receiver to ensure that audio is distributed evenly between speakers if you are using multiple speakers in your setup.

Speaker Not Powering On:

• Power Connection: Confirm that your amplifier or receiver is powered on and functioning correctly. If the amplifier is off, the speaker will not receive power.
• Check Wiring: Verify that the speaker wire connections are secure at both the speaker and amplifier ends. Loose or damaged wires can prevent the speaker from powering on.
• Power Indicator: Check if the Goldwood DPI-1200C/8 has a power indicator light. If it does, ensure that it is illuminated when the speaker is connected and the amplifier is on.

Excessive Hum or Noise:

• Grounding Issues: If you hear a persistent hum or noise, check the grounding of your audio equipment. Ensure that all components are grounded properly to minimize interference.
• Interference Sources: Remove any potential sources of electromagnetic interference (e.g., mobile phones, electronic devices) from the vicinity of the speaker and audio cables.

Speaker Overheating:

• Reduce Volume: If the speaker is overheating, it may be due to prolonged high-volume use. Lower the volume to allow the speaker to cool down.
• Ventilation: Ensure that the speaker has adequate ventilation. Avoid blocking the speaker’s vents or placing it in enclosed spaces.

If you have followed these troubleshooting steps and the issue persists, contacting Goldwood customer support or seeking assistance from a qualified technician may be necessary for more complex issues or repairs.

FAQs

What is a passive DJ speaker, and how does it work?

A passive DJ speaker, like the Goldwood DPI-1200C/8, is a speaker that requires an external amplifier or receiver to provide power and signal. It does not have a built-in amplifier. The speaker receives audio signals from the amplifier and produces sound through its components, including the woofer, midrange, and tweeter.

What kind of amplifier or receiver should I use with this speaker?

You should use an amplifier or receiver that provides a power output per channel within the range of 10 to 500 watts. Be sure to match the speaker's power handling capabilities for optimal performance.

Can I connect multiple Goldwood DPI-1200C/8 speakers together for a larger setup?

Yes, you can daisy chain multiple Goldwood DPI-1200C/8 speakers using the 1/4

What is the purpose of the internal crossover wiring system?

The internal crossover wiring system ensures that the tweeter, midrange, and woofer work together harmoniously to reproduce different frequency ranges accurately. It helps balance and optimize the sound output.

Can I use these speakers for outdoor events or performances?

While the Goldwood DPI-1200C/8 is designed for portability, its use in outdoor environments should be approached with caution. Protect the speaker from moisture and ensure it is not exposed to direct rain. Using a weatherproof cover can help safeguard the speaker during outdoor use.

What's the difference between passive and active (powered) speakers?

Passive speakers, like the Goldwood DPI-1200C/8, require an external amplifier or receiver to provide power and signal. Active (powered) speakers have a built-in amplifier, making them more self-contained and suitable for simpler setups where an external amplifier is not needed.

Can I use these speakers for home audio applications, like a stereo system?

Yes, you can use the Goldwood DPI-1200C/8 for home stereo or audio setups. Connect them to a suitable amplifier or receiver to enjoy high-quality sound in your home.

How should I clean and maintain these speakers?

Clean the metal mesh grills and cabinet as needed using a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the speaker's surface. Inspect the speaker wire connections periodically for any loose or damaged wires.

What is the frequency response of the Goldwood DPI-1200C/8?

The Goldwood DPI-1200C/8 has a frequency response of 32Hz-30 kHz, which covers a wide range of audio frequencies, making it suitable for various music genres and applications.

Can I use the Goldwood DPI-1200C/8 with instruments like electric guitars or keyboards?

While the Goldwood DPI-1200C/8 is primarily designed for audio playback, you can connect instruments with compatible outputs to the speaker through an amplifier or mixer. Ensure that the instrument's signal matches the speaker's input requirements.

Can I use banana plugs to connect my amplifier to the Goldwood DPI-1200C/8?

Yes, the Goldwood DPI-1200C/8 features banana plug input connections, allowing you to use banana plugs for secure and convenient speaker wire connections.

Is this speaker suitable for karaoke applications?

Yes, the Goldwood DPI-1200C/8 is suitable for karaoke setups. Connect it to your karaoke machine or mixer for clear and dynamic vocal reproduction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>