GOLDWOOD TIKITORCHTT100 Bluetooth Weather Resistant Tiki Torch User Manual
- June 6, 2024
- GOLDWOOD
Table of Contents
Users Manual
Troubleshooting:
- If the additional speakers do not connect to the 1st speaker or you do not hear an audible beep sound when pairing the additional speakers, please double press the ON/OFF button on the additional speakers again.
- If your device is an Apple product, make sure only 1 “UUFFOO” record is in the device list, otherwise, you will not be able to pair. To fix this, simply have your device “Forget this Device” on any additional “UUFFOO” devices leaving only 1.
- This product has a memory storage function (if the batteries are not fully exhausted), when you turn on the speaker, the light and speaker will maintain the same settings and pairing as the last time used. If the battery is exhausted there will be no memory storage function and you will need to pair the 1st speaker with the additional speakers.
Bluetooth Weather Resistant Tiki Torch
Congratulations on your purchase and welcome to the world’s finest brand of
audio equipment. If you ever have questions about your product, please contact
your authorized dealer and their highly experienced staff will be more than
willing to help. Please read the following manual carefully before installing,
connecting, or adjusting your new speaker.
Made in China
www.goldwood.com
www.goldwood.com
Contents:
1 x Luminous Speaker
1 x fastener for lantern
4 x poles
1 x Spike
1 x Micro USB charging cable
1 x User manual
Construction:
Put all the parts together and fasten the luminous speaker on the upper part
of the fastener. Then connect the poles and the spike by means of a turn.
After that, you can push
the ground spike into the ground.
Product Operation Panel:
Top of the speaker:
Specifications:
-Ambient temperature for operation: 7° F to 95° F
-Charge time: 5 hours
-Charge duration (depending on lighting and sound intensity):
Light only: around 20 hours
60% Volume+Light: around 6-7 hours
Max Volume+Light: around 4 hours
-IP Class: IP44
-Power: 60W Total System Power
-Sensitivity: 90
-Frequency Response: 70Hz – 20kHz
-Bluetooth Name: BUFFALO
Features:
– Weatherproof against rain, snow, ice, salt, pool chemicals, etc.
– Built-In Bluetooth Receiver
– Butyl Rubber Surrounds
– Voiced for Outdoor Performance
– 2- Way Design and Functionality
Bluetooth Function:
- Make sure the battery is fully charged before attempting to connect the first time.
- Starting with the 1st Tiki Torch, press and hold the Bluetooth ON/OFF button on the top of the speaker. There will be an audible activation beep and the indicator light will flash.
- On your phone, turn Bluetooth to “ON” and select “UUFFOO” in your Bluetooth device list. Once the device is connected you will hear a second audible beep from the speaker and the indicator light will be blue.
- PAIRING: To connect with additional speakers (the 2nd, 3rd…99th speakers), quickly double press the ON/OFF button on each additional speaker. You will hear a beep sound from the additional speaker. Once paired, you should hear the music playing in a while. To cancel, the pairing quickly doubles press the ON/OFF button. No beep will be heard when turning the speakers off.
- To turn off the Bluetooth function, press and hold the ON/OFF button.
Battery Operation:
- Please charge the battery fully before first use.
- Connect the USB adapter to the speaker using the charge port. While the battery is charging the indicator will be red.
- Charge the battery until the indicator light is off.
- After the battery has been charged, turn on the speaker and the indicator should be blue. Press and hold the Light ON/OFF button at the top of the speaker to turn the Tiki Torch ON or OFF. Press the light ON/OFF button a 2nd time to have the light enter flicking flame mode. Then follow Bluetooth function instructions.
Note: The built-in battery is not replaceable. Please do not remove or replace it in the trash. If you must dispose of this speaker, bring it to your local recycling center.
Precautions:
– The USB Cable is not waterproof, please only charge the battery indoors.
– this product should never be submerged in water
– disconnect the power adaptor from the outlet when not in use
– do not stand or jump on this product
– keep this product away from chemicals and high heat
– do not attempt to disassemble the speaker
– do not use this product outdoors if they are cracked or damaged
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party. Responsible for compliance could void the user’s
authority to operate this equipment.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC radiation exposure limits set forth for
uncontrolled environments.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.