hp BP5000 Projector User Guide

: June 6, 2024
: HP

Table of Contents

Package Contents
DEVICE OVERVIEW
FCC Statement
Technical Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hp BP5000 Projector User Guide

Congratulations and thank you for choosing HP BP5000 / BP5000 Plus, part of the definitive premium cinema projection series. Be prepared for unparalleled audio-visual immersive experiences of up to 150 inches.

Package Contents

HP BP5000 or HP BP5000 PLUS *1

Power Cord *1
Remote Control * 1
AA battery 2 Quick Start Guide 1
HP Warranty Card *1
Product Notice *1

DEVICE OVERVIEW

HP BP5000/BP5000 PLUS Supported Input Sources:

Embedded digital content platform (via wireless stick and/or R.145 Ethernet port)
Digital and Ananlog TV
HDMI * 2 (including HMI ARC)
USB2.0*2

HP BPS000/BPS000 PLUS features an embedded powerful 30-watt stereo speaker set with deep bass, detailed mids and clear treble. However, the below audio outputs are also supported to suit your individual needs.

S/PDIF * 1
HDMI ARC *1
3.5mm earphone out
Bluetooth (4.0)

How to use:

Place the projector onto a stable horizontal level surface (eg. table, TV stand) facing the desired vertical projection surface (eg. wall, projection screen). Plug the projector with the power cable into a working AC power socket, connect your external video and audio sources into the applicable input ports.
Before using the remote controller for the first time, insert the included AA batteries*2 into the remote. Power on the projector and follow the on-screen instructions to pair the remote.
If you would like to set-up the projection area yourself, please select (Settings > Projection > Installation Assistant). Please follow the on-screen instructions. Alternatively, you may seek professional assistance by contacting your local installation provider.
If you experience the projected picture being out of focus and/or distorted, please select (Settings > Projection > Auto-Focus / Keystone) to correct this.
To ensure safe viewing and prevent eyesight damage, we recommend you enable Smart Eye Protection (Settings > Projection > Smart Eye Protection). During operation, DO NOT look directly straight-on at the projector lens.
You may also use BP5000/BP5000 Plus as a speaker (audio-only) without using the screen. (Settings > Switch off Display).
Voice input support is limited to mainland China.
We would like to thank you again, and sincerely hope you will enjoy using HP BP5000 / BP5000 Plus to elevate your audio-visual experiences.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’ S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Pat 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ha residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accidence with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and OR the user is encouraged to by to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Corned the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device has been tested and found comply with FCC radiation exposure limit set forth for a uncontrolled environment and meet the FCC radio frequency (RF) exposure guidelines.

The distance between user and products should be no less than 20cm.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.