Chicony Electronics MT-2103 Bluetooth Mouse User Manual

Chicony Electronics MT-2103 Bluetooth Mouse User Manual

Getting Started

Thank you for choosing this mouse with state-of-art Bluetooth technology to ensure no hinder communication between the mouse and Google Chrome OS systems and certified with WWCB.

Package Content

• 1 x Mouse MT-2103
• 1 x Quick Start Guide
• 2 x AAA battery

Feature

• Use high technological Bluetooth (BLE5.2)
• Low power consumption (24 months with 2xAAA battery)
• WWCB certificated mouse

Product Specification

Electrical Specification

1. BT Connection distance: 10M

2. Input Voltage / current: 0V / 10mA

3. Battery: 2 x AAA battery

4. Battery State: Cut off detect voltage：0V +/- 0.1V

5. Power Led Indication:
   Power On: Blue led brightens for 3 seconds. Pairing mode: Blue led keep blinking for 3 mins.

6. Battery Led Indication:
   The device’s low battery threshold should be set to 15% of the battery’s usable capacity

Mechanical Outline

Pairing

Pairing Mode

Press and hold the power button for 3 seconds to until Blue Led keeps blinking.

Connect to System

Choose the identified mouse (MT-2103 Bluetooth Mouse) and connect it with your system.
When “This device has been successfully added to this computer” window displayed, you can start use this Bluetooth mouse.

Power Off

Switch the power button to OFF.

Troubleshooting and Tips

The mouse does not operate following installation or is not recognized:

• Make sure the batteries capacity are
• To determine whether the keyboard, mouse or computer causes the problem test the keyboard and mouse on another computer if possible; or test another keyboard and mouse on your current

If you are still unable to solve the problem, please contact your point of sale or your dealer.
If you need to exchange the mouse, please note that you must return it to your dealer in its original packaging with a produce proof of purchase (receipt). Keep your receipt in a safe place after purchasing.

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation. If this equipment does cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful Interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement

This radio device product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Industry Canada statement

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure statement

The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>