tuya BB14-220214 Smart Switch Instruction Manual

: June 4, 2024
: Tuya

Table of Contents

Product Description
Safety Information
Installation
Add Devices
Enter Smart Life skills in Alexa APP
SERVICE
RECYCLING INFORMATION
Documents / Resources

Instruction Manual
Smart Switch
ZigBee & Mesh

tuya
BB14-220214 Smart Switch - qr code https://drive.google.com/drive/folders/1jyzK3JKCjVJ- K6vzozsvhr_q09eow6Dg?usp=sharing

Product Description

This newly designed smart switch with 1/2/3/4 gang optional is designed with ZigBee protocol to replace traditional switches with a variety of ways to control. One switch for two wirings is optional (N+L wire / only L wire) and a ZigBee hub is required for normal use. Now one new smart feature a multi- control association(only for N+L wire) to other smart switches is added to the Smart Life/Tuya App, and all-controlling modes work without any interference. Its design is suitable for diﬀerent decoration styles with its best value.

Safety Information

Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions,please seek professional assistance from a qualiﬁed electrician.

Technical Parameters:

Model: ZTS-US / ZTS-EU
Rated voltage: 100-240V AC, 50Hz/60Hz
Max. Load: 600W(INC)/220V; 300W(INC)/110V; 120W(LED/CFL)/220V/110V
Min. Load: 3W(INC/LED/CFL)/220V/110V
Wireless Protocol: ZigBee 3.0 & Mesh
Working temperature: -10℃~45℃
Support system: Android/iOS

Warnings:
Turn oﬀ the power at the circuit breaker and test that power is oﬀ before wiring.

Installation

Note:

Max. Load: 600W(INC)/220V; 300W(INC)/110V; Make sure that the power at the circuit breaker is oﬀ before wiring.
Two versions are available and optional: Neutral wire is required and no neutral is needed in your switch boxes to operate correctly. Please make the correct wiring according to the switch you purchased.
If you buy a switch version that requires a neutral wire, please conﬁrm that your wall box contains a Neutral Wire(typically white). If the wall box doesn’t have a Neutral Wire, please try another location at your home or call a professional electrician to install the switch.
The wire colors indicated in this manual are the usual colors and may diﬀer in some houses.
Ensure the wire conductors are securely fastened to each wire.
Ensure the Wi-Fi signal is steady and normally working before wiring and your mobile and Zigbee gateway hub are under the same 2.4GHz WiFi network.
If you don’t have any wiring experience, please call a professional electrician.

Step 1
Turn oﬀ the circuit breaker and use the electrical tester to test the power.
Ensure the circuit breaker is oﬀ before wiring.
Attention:
Please disconnect the power supply before installing or removing the device for avoiding irreversible damage on the device from the electric current or some unpredictable problems such as lamp ﬂashing.
Step 2

Remove the old switch

Step 3

Remove the switch and pull it away from the wall.
Identify Line/Load Wire(Note: The color of your wire may be diﬀerent from the color shown in the manual.)
Verify power is oﬀ
We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit.
You may need to turn oﬀ more than one circuit breaker.

Step 4

Take pictures of the wiring
Follow the wiring diagram to connect the switch wires to the wires in the wall box with the wire conductors.

Step 5

Open the switch panel from the bottom of the switch with a screwdriver
Mount the switch with the provided screws and snap the wall plate on it.

Step 6
Turn the power back on at the circuit breaker and then switch the light on.

Add Devices

Download Smart Life App
|
---|---
http://app.yimusmart.com/smartlife| http://app.yimusmart.com/smartlife

Please scan the QR code or download Smart Life on the App store.

Registration or Log in
• Download the “Smart Life” Application
• Enter the Register/Login interface; tap “Register” to create an account by entering your phone number to get the veriﬁcation code and “Set password”.Choose “Log in” if you already have a Smart Life account.
Conﬁgure the APP to the switch
• Preparation: Ensure the switch has been connected to electricity; ensure your phone has been connected to Wi-Fi and is able to connect to the Internet.

Note:
The switch only supports a 2.4G network. If you have connected to a 5G network, please disconnect the 5G network ﬁrstly and connect 2.4G network.

3.1 ZigBee link method:
Pair and clear up the ZigBee code
Press and hold the button for about 5 seconds, until the blue indicator on the switch ﬂash fast after 3 seconds.
Repair is successful.

tuya BB14-220214 Smart Switch - ZigBee link method Open the App, select “+” on the top right, and choose “Switch (Zigbee)” to add a device. And select the right Gateway to conﬁrm the connection.
Note:
The switch only supports a 2.4G network. If you have connected 5G network, please disconnect the 5G network ﬁrstly and connect 2.4G network.
Conﬁrm the Zigbee switch blue indicator is ﬂash fast (twice a second).
Conﬁrm the Zigbee switch blue indicator is ﬂash fast (twice a second).

The connecting will take about 10-120 seconds to complete depending on your network condition.

When pairing is done, the Zigbee switch will be shown on the App.
How to reset/repair ZigBee code
Press and hold the button for about 5 seconds,until the blue indicator on the switch ﬂash fast after 3 seconds.
Reset/Repair is successful.

3.2 How to achieve multi-control association (only for N+L wire)
Note : Please conﬁrm that you have successfully ﬁnished the link method above for adding this switch to your Smart Life App before the association.

Add another smart switch to the same Smart Life/Tuya App. (If there is a smart switch having been added before to the app, just go to the next step.)
Note: If your switch requires a neutral wire, then there is no need to wire the newly added switch to the light, only L and N are required for wiring. Then you can control 1
light with multiple switches in Smart Life Tuya App.
If your switch doesn’t require a neutral wire, you need to follow the wiring instructions to connect the L and light. At this point, you can control the lights simultaneously with multiple switches.
Then you will see two devices in the app and click the main switch(as one gang switch as below) by entering into the next operation.
Click in the upper right corner and choose“MultiControl Association, and then click “+” in the right corner
Choose the switch that you want to associate to and then choose the switch button that you want to control the same light.
Then go back to the previous page, and you will see two items on the page, one is your main switch, and the other is the one you associate just now.
Note : Please conﬁrm that the associated switch is enabled.
Now you are able to control your light with two switches. Do not associate another button in the same switch for multi-control.
If you want to add another third or more smart switches to control your light, just repeat the steps above. And you will see the result as below when you associate another new switch.

Enter Smart Life skills in Alexa APP

Complete product networking conﬁguration in the App
Complete the device’s networking conﬁguration according to the prompts in the App.
Note: In the App, change the name of the device to an easily identiﬁable name such as Alexa; names are usually in English, such as “bed light”.
Conﬁgure the Amazon Echo device
(If you have already conﬁgured Amazon Echo, you can skip this step. The following instructions are based on the iOS client.)
• Make sure your Amazon Echo device is powered on and connected to a Wi- Fi network.
• Open the Alexa App on your phone. After successful login, tap on the menu in the upper left corner of the Home page, select “Settings” and tap “Set Up A New Device” to set up the Amazon Echo.
• Choose your Amazon Echo device type and language for connecting. Press and hold the small dot on the device until the light turns yellow. Then tap “Continue” to connect to the hotspot.
• After connecting to the Amazon Echo hotspot, return to the page. At this point, the connection is successful.Tap “Continue” to proceed to the next step. Choose a Wi-Fi network to connect to. Amazon Echo will take a few minutes to try to connect to the network.
• After the network connection is successful, tap “Continue”. An introduction video will appear. After the video ends, tap “Continue” to jump to the Alexa Home page. You have now completed Amazon Echo’s conﬁguration process.
Key step —— Link Skill
• Tap on “Skills” in the Alexa App menu.
• Then search for “App Name”. Tap “Enable” to enable the Skill.
• Enter the App account and password, then tap “Link Now” to link your App account to enable the Skill. Now you can start your smart home journey.
Common commands
Control the device via voice commands, now you can control your smart device with Echo. You can control your device (such as your bedroom light) with the following commands:
Alexa, turn on/oﬀ bedroom light. (Turn on/oﬀ the light)
Alexa set the bedroom light to 50 percent. (Set the light to any brightness)
Alexa, brighten/dim the bedroom light. (Increase/weaken the brightness of the light)
Alexa set the bedroom light to green. (Adjust the color of the light)

SERVICE

During the free warranty period, if the product breaks down during normal use, we will oﬀer free maintenance for the product.
Natural disasters/man-made equipment failures, disassembly and repair without the permission of our company, no warranty card, products beyond the free warranty period, etc., are not within the scope of the free warranty
Any commitment (oral or written) made by the third party (including the dealer/service provider) to the user beyond the warranty scope shall be executed by the third
party
Please keep this warranty card to ensure your rights
Our company may update or change the products without notice. Please refer to the oﬃcial website for the updates.

RECYCLING INFORMATION

****All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately
from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To ﬁnd out where these collection points are and how they work, contact the installer or your local authority.

WARRANTY CARD

Product Information
Product Name____
Product Type_
Purchase date__
Warranty Period_
Dealer Information
Customer’s Name
Customer Phone__
Customer Address_____
Maintenance Records