Fortyfour Group TEMBLOR BT Speaker Plus Wireless Charging Instruction Manual
- June 6, 2024
- Fortyfour Group
Table of Contents
Fortyfour Group TEMBLOR BT Speaker Plus Wireless Charging
Specification
- Bluetooth Version: V5.0
- Battery: Lithium-Polymer / 600mAh Speaker output : 5W
- Operating distance: Around 10m
- Product Size: 123.55786.5mm
- Material: Cement + ABS + Bamboo
- Coils: 1pc
- Input: DC5V-2A
- Wireless Output: 5W(Max.)
Accessory
- Micro USB charging cable x 1pcs
- Instruction manual x 1pcs
Operation Instructions
- Wireless charging area
- Micro USB charging port
- Wireless charging LED indicator
- Charging /Bluetooth status LED indicator
- Aux in jack
- Speaker Power switch:ON/OFF
Play via Mobile phone/Tablet/Computer in Bluetooth state
- Slide the Speaker Power switch ⑥ to turn on the power of speaker
- Activate Bluetooth in Phone or Computer
- Search the speaker, name “BT Speaker”
- Pairing
- Connect and Play
- Control your music with your Mobile phone/Tablet/Computer
Play via Aux
- Insert the aux cable(not included)to the Aux in jack⑤and connect to your Mobile phone/Tablet/Computer
- Control your music with your Mobile phone/Tablet/Computer.
Wireless charging
- First plug the product using the included Micro USB cable into the USB port of your wall adapter
- Make sure your phone is compatible for wireless charging function.
- Put your wireless charging Qi-enabled device on the wireless charging output area ①
- Wireless charging LED indicator ③ lights up in green when charging successfully.
Remark:
The built-in battery of this product only supports the power supply of the
Speaker,the wireless charging function of the product need external power
supply to use it.
If you need to use the wireless charger & speaker functions at the same
time,Please connect external power supply and turn the speaker power on.
Note:
- The phone call could be interfered with high frequency electromagnetism. Avoid use this product under high frequency environment.
- Wireless is a bidirectional transmitting protocol; transmitting distance is highly related to the audio player.
- When the speaker cannot be connected, please delete the rest Bluetooth devices name on the list of user’s computer / mobile phone. Then, follow the steps in operation instructions.
- The sound performance could also be affected under poor signal environment,or product is low battery capacity.Please move the product to environment with strong signal or charging the product.
Wireless charging note:
- Some phone cases may block the wireless charging
- Do not place other materials, like metal objects,, magnets, and magnetic stripe cards,between the mobile device and the wireless charger station.
- When the mobile device is not placed on the charging area accurately,your mobile device may not be charged properly.
- Please do not expose this device to moisture or heat sources.
FCCCaution
This devicecomplieswithpart15ofthe FCCRules.Operation is subject to the
following two conditions:(1)This device may not cause harmful
interference,and(2) this device must accept any interference
received,including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the users authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
fora Class B digital device, pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful interference in
a residential installation
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/tv technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimumdistance 20cm between the radiator &your body.