FEIT Electric PANEL/SOL/CAM Camera Solar Panel Charger Installation Guide
- June 6, 2024
- Feit Electric
Table of Contents
FEIT Electric PANEL/SOL/CAM Camera Solar Panel Charger
Safety Information
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS: ALWAYS FOLLOW BASIC SAFETY PRECAUTIONS WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT.
CAUTION:
- Please read all information carefully before installation.
- Intended for outdoor use.
- This product is NOT a toy.
NOTE : Works with Feil 8ectric Smart outdoor Battery-Powered camera. Model#: CAMJWMIWIFIIBAT
Limited Warranty
This product is warranted to be free from defects in workmanship and materials
for up to 1 year from date of purchase. If the product fails within the
warranty period, please
feit.com/help for instructions on replacement/refund
or call 866.326.BULB. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE
EXTENT PROHIBITED BY
applicable UW, Alff IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION
OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY
EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of
incidental or consequential damages, so the above limitation or exclusion may
not apply to you. This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state or province to province.
Pre-Installation
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE : Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Solar Panel | 1 |
| BB | Mounting Bracket | 1 |
| cc | 9 ft. Cable | 1 |
DD EE
FF
| Mounting Screws| 3
Mounting Anchors| 3
Hex Key| 1
Mounting & Installation
-
Select a Suitable Location
Select a location where the Solar Panel (AA) receives the most sunlight throughout the year. -
Mark Screw Positions
Use a pencil and the Mounting Bracket (BB) to mark the screw positions on the wall. -
Drill Holes and Insert Mounting Anchors
Drill holes at the marked points. If installing on a hard surface such as concrete or brick, insert the Mounting Anchors (EE) into the holes. You can skip this step if installing on wood or siding.
-
Attaching the Mounting Bracket
Insert the Mounting Screws (DD) into the Mounting Bracket (BB) and use a screwdriver to secure the Mounting Screws (DD) into the wall.
-
Attach Solar Panel
Attach the Solar Panel (AA) to the Mounting Bracket (BB). Align the Solar Panel (AA) with the threaded screw on the swivel head of the Mounting Bracket (BB). Screw in the Solar Panel (AA) until it is fully secured and tighten the thumbscrew.
-
Adjust the Solar Panel
Use the HEx Key (FF) to losen the hex screw then adjust and rotate the viewing angle on the Solar Panel (AA). Point the Solar Panel (AA) towards the sun, away from cover and shade.
-
Connect the Solar Panel to a Camera
After adjusting the Solar Panel to (AA), a tighten hex screw. Connect the USB cable (CC) from the Solar Panel (AA) to the battery-powered Smart Outdoor Camera (sold separately).
Please contact feit.com/help for further assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>