Ronix 2220 Electric Impact Drill User Manual

Ronix 2220 Electric Impact Drill

Specifications

• No-load Speed: 0-1100RPM / 0-2800RPM
• Weight: 3.5kg
• Chuck Type : Keyed
• Chuck Size : 13mm
• Power: 1050W
• Voltage: 220-240V
• Frequency: 50-60Hz
• Max Capacity in Wood : 30mm
• Max Capacity in Steel : 13mm
• Max Capacity in Masonry: 16mm

Product Usage Instructions

Parts Overview

• Drill Chuck
• Adjusting For Hammer Drilling/Drilling Knob
• Depth Stop Guide
• Adjustable Hand Grip
• Low/high-speed revolve key
• Operating switch with Speed regular wheel
• Direction knob
• Lock Button

Safety Precautions

Always ensure the switch is in the off position before
connecting the power tool to the power source to prevent accidental
starting. Refer to the user manual for detailed safety
instructions.

Operating Instructions

1. Select the appropriate speed setting based on the material being drilled.
2. Adjust the depth stop guide to control the drilling depth.
3. Firmly grip the adjustable hand grip for stability during operation.
4. Press and hold the operating switch while using the tool.

Maintenance Tips

• Service the power tool with qualified personnel using identical replacement parts.
• Keep handles clean, dry, and free from oil and grease.
• Avoid touching rotating parts during operation.

SPECIFICATION

• Model 2220
• Chuck Type Keyed
• Chuck Size 13mm
• Power 1050W
• Voltage 220-240V
• Frequency 50-60Hz
• Max Capacity in Wood 30mm
• Max Capacity in Steel 13mm
• Max Capacity in Masonry 16mm
• No-load Speed 0-1100RPM
• 0-2800RPM
• Weight 3.5Kg
• Supplied in BMC
• Includes Auxiliary Ronix Design handle
• Depth gauge, chuck key

PARTS LIST

NOTE:
To achieve the best performance of your product, please read this instruction manual carefully before using it, and keep it for future reference.

CAUTION:

• To reduce the risk of electric shock do not open this device, there are no serviceable parts for customers. Please refer any maintenance or repair to qualified personnel.
• This sign means the existence of dangerous voltage at the inside of the unit, which states a risk of electric shock.
• This sign means that there are important instructions for operation and handling in the manual that comes with this device.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING!

• Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and or serious injury.
• Save all warnings and instructions for future reference.
• The term “power tool” in the warnings refers to your mains-operated (corded) power tools or battery-operated (cordless) power tools.

WORK AREA SAFETY

• Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Don’t operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRIC SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way. Don’t use any adaptor plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Don’t abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increased the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Using a cord suitable for outdoor use will reduce the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. The use of an RCD reduces the risk of electric shock.
• Use of power supply via an RCD with a rated residual current of 30mA or less is always recommended.

PERSONAL SAFETY

• Stay alert, watch what you are doing, and use common sense when operating a power tool. Don’t use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Don’t overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Don’t wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
• If devices are provided for connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.

POWER TOOL USE AND CARE

• Don’t force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Don’t use the power tool if the switch doesn’t turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and don’t allow persons unfamiliar with power tools or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories tool bits, etc. to the instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

SERVICE

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• Follow instructions for lubricating and changing accessories.
• Keep handles dry, clean, and free from oil and grease.

HAMMER DRILL SAFETY WARNINGS

• Wear ear protectors when impact drilling. Noise exposure can cause hearing loss.
• Use auxiliary handle(s), if supplied with a tool. Loss of control can cause personal injury.
• Hold the power tool by an insulated gripping surface, when performing an operation where the cutting accessory may contact hidden wiring or its cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations.
• Hold the tool firmly with both hands.
• Keep hands away from rotating parts.
• Don’t leave the tool running. Operate the tool only when hand-held.
• Don’t touch the bit or the workpiece immediately after the operation; they may be extremely hot and cold and burn your skin.
• Some materials contain chemicals that may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.

INSTRUCTIONS FOR USE

THIS DRILL HAS THE FOLLOWING FUNCTION

• The operating switch is used for all work carried out with the drilling machine. With the speed selection via the regulator wheel, you have optimum control of the machine.
• The machine can be set to continuous operation with the locking button.

The second handle gives you an additional way of holding the machine firmly. Depending on the position of the hammer drilling/drilling switch, you can use your drilling machine as a hammer drill or rotating drill.

The direction switch controls the direction of motion when the machine is used as a screwdriver or if you would like to remove a drilling bit that has become jammed.
Using the adjustable bit stop you can fix the depth of blind holes accurately during drilling.

The mechanical gearbox of the machine can be set in two different positions:

1. Low speed : for drilling bigger holes which needs more force.
2. High speed: for drilling holes with lower diameters.

PREPARING THE DRILLING MACHINE

WARNING!
When performing the following work, always ensure that the machine is not connected to the main power supply.

INSERTING THE SECOND HANDLE
To assemble the second handle, release it by rotating the lower part anti- clockwise so that you can easily pull the handle over the drill chuck onto the flange located behind it. Then turn the handle to a working position that is comfortable for you and fix it in place by tightening it (rotating the lower part clockwise).

ADJUSTING THE BIT STOP
The second handle has a retainer for the bit stop. Insert a drill. Now release the handle. Push the bit and stop forward until its end is in line with the end of the drill. Now push the bit stop back until the distance between the end of the bit stop and the end of the drill corresponds to the depth to which you would like to drill.

INSERTING THE DRILL
First, remove the mains supply from the socket. Turn the ring of the drill chuck until the clamping jaws are open wide enough. Insert the drill into the clamping jaws of the drill chuck.

Ensure that the mains power supply voltage is the same as the operating voltage of your machine. For details, please see the type plate. Insert the correct drill for the type of job to be performed. If necessary, adjust the bit stop. Adjust the speed of the machine using the regulating wheel on the operating switch. The more the operating switch is pressed, the faster the drill rotates. Set the direction switch to the desired direction of motion. Never alter the position of the hammer drilling switch or the direction switch when the machine is switched on. The machine is switched on by pressing the operating switch. When the operating switch is released, the machine stops. If you would like to use continuous operation press the locking button while the operating switch is pressed. To switch off the machine during continuous operation, press the operating switch again and then let it go. Do not touch the drill chuck while the machine is switched on.

DRILLING TIPS

• Always insert the correct size and type of drill or screwdriver.
• Set the machine to the correct speed.
• Always hold the machine tightly by the handle and second handle.
• When drilling wood and metal, set the hammer-drilling switch to drilling.
• When drilling masonry, set the hammer-drilling switch to hammer drilling.
• When using the machine as a screwdriver, set the hammer-drilling switch to drilling.
• Set the direction switch to the correct direction.
• Never change the direction of motion when the machine is switched on.

CARE OF THE TOOLS

OVERLOAD
Never use excessive force when drilling. Too much pressure reduces the speed of the machine, and the required power is greatly reduced. This may result in overload, which can damage the motor of the drilling machine. When the drilling machine becomes too hot, allow it to run for two minutes without a load and then interrupt working for a short time. Clean the drilling machine with a clean cloth and a brush. Ensure that the ventilation slits are not blocked.

WARNING!
Always use the additional grips that come with the appliance. Losing control of the appliance may result in injuries.

scanner

www.ronixtools.com

FAQ

• Q: What should I do if the power tool does not start?
  • A: Ensure the switch is in the correct position and check the power source connection. If the issue persists, consult a qualified repair person.
• Q: How do I adjust the speed of the tool?
  • A: Use the speed regulator wheel on the operating switch to adjust between low and high speeds based on your drilling requirements.
• Q: Can this drill be used for masonry work?
  • A: Yes, this impact drill has a max capacity of 16mm in masonry, making it suitable for masonry work.

References

• Global Power Tools | Hand Tools | Cutting Tools | ? Ronix Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>