YENKEE YKB 3700 Mechanical Gaming Keyboard User Manual

: June 9, 2024
: YENKEE

Table of Contents

YKB 3700 Mechanical Gaming Keyboard
Keyboard connection
Keyboard shortcuts and functions
Instructions and information regarding the disposal of used packaging
Read User Manual Online (PDF format)
Download This Manual (PDF format)

YKB 3700

Low profile mechanical RGB keyboard

YKB 3700 Mechanical Gaming Keyboard

Keyboard connection

Wired

Move the left switch on the right side of the keyboard back to the middle position.
Plug the included charging and data cable into the keyboard with the USB-C connector end and into your computer with the USB-A end.
Wait far the computer ta automatically install the necessary drivers, and the system will inform you when the installation is complete.
Now the keyboard is ready for use.

Bluetooth

Move the left switch on the right side of the keyboard back to the left position.
On the device you want the keyboard to connect to, open the Bluetooth device menu.
The keyboard has the ability to pair up to three devices at the same time, but it is first necessary to pair the keyboard with the devices. The device can be switched using the keyboard shortcut FN + Q/W/E. These are indicated by a red/green/blue LED in the top left corner of the keyboard. Put the keyboard into pairing mode – select one of the options shown and the LED will flash rapidly with the appropriate LED colour.
Now hold the selected shortcut for 3 seconds and the LED will start to flash much slower.
The keyboard is now visible on the device it is to be paired with. Successful pairing is indicated by a static LED.
The keyboard remembers the device. If you have Bluetooth enabled on the paired device, just press the appropriate shortcut again (FN + 0/W/E) and the keyboard will automatically connect.
If the keyboard is idle for 5 minutes, the backlight is deactivated to save battery power. When you press any key, the keyboard will regain the backlight. If you do not use the keyboard for 30 minutes, a sleep made is triggered that disconnects the keyboard from the active device. After pressing any button, the keyboard reconnects to the last device.

2.4GHz

Move the left switch on the right side of the keyboard back to the right position.
Remove the included USB receiver from the package and insert it into an available USB slot on your computer.
Press the FN+G keyboard shortcut for 3 seconds until the indicator on the top left side of the keyboard starts to flash yellow slowly.
Wait for the automatic connection to the receiver and the installation of the drivers, the system will notify you when itis complete.
Now the keyboard is ready for use, the success of the connection is confirmed by a static yellow indication.
If the keyboard is idle far 5 minutes, the backlight is deactivated to save battery power. When you press any key, the keyboard will regain the backlight. If you do not use the keyboard for 30 minutes, a sleep made is triggered that disconnects the keyboard from the active device. After pressing any button, the keyboard reconnects to the last device.

Charging

The keyboard shortcut FN + Spacebar alerts you to the battery status in the form of green backlit buttons on a scale from F1-F10. Each key indicates 10% of the battery level.
If the battery is low, the corresponding LED in the top left corner of the keyboard will flash.
If you use the keyboard in wired mode, the keyboard is also recharged. The low battery indicator in the top left corner will glow a static red until it turns green. This indicates the keyboard is fully charged.

Keyboard shortcuts and functions

| Factory settings (hold for 3 seconds)
---|---
| Decrease the effect speed
| Increase the effect speed
| Decrease the effect brightness
| Increase the effect brightness
| Change the backlight effect
| Change effect colour

Windows shortcuts
For Windows mode, move the right switch on the right side of the top back of the keyboard to the left position

| Previous track
---|---
| Pause/Run
| Next track
| Mute
| Decrease volume
| Increase volume
| Snippet
| Eject CD/DVD drive
| Lock the Windows button

MacOS features
For macOS mode, move the right switch on the right side of the top back of the keyboard to the right pasition

| Decrease brightness
---|---
| Increase brightness
| Mission Control / show running applications
| Keyboard language (0S Win] / Siri – Dictation (MacOS)
| Option
| Command

The software for further keyboard settings is available to download at www.yenkee.eu, joined by its detailed user manual.

Specification:

15 gf | Switch overall travel: 2.75 + 0.25 mm | Switch actuation: 1.5 + 0.5 mm | Switch lifespan: 60,000,000 keystrokes | Keys: 85 | Anti Ghosting: N-Key Rollover | Backlight colour: Full RGB 16.8M colors | Rated input: : 5V DC / 350 mA max. (USB C) | Max. transmitter power at 2.4 GHz – 2.4835 GHz: 3,2 mW | Built in battery: 2000 mAh (Lithium) | Working hours: up to 160 h (power saving mode) | Charging time: 3 – 5h | Dimensiones: 309 x 119 x 24.5 mm | Cable length: 1.5 m (removable Type C – included) | Material: ABS / aluminium / other | Keyboard weight: 435 g

System requirements:
| USB port | Windows 7/8/10/T11 | Mac OS

Instructions and information regarding the disposal of used packaging

materials

Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new p roduct.
The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative im pact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.

For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.

Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.
This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety.

Manufacturer:
FAST CR, a.s., U Sanitasu 1621, 25101, Ricany, Czech Republic
Copyright © 2022, Fast CR, as.
Revision 09/2022