dyson Gen1 Cool Purifier User Manual
- June 13, 2024
- dyson
Table of Contents
Gen1 Cool Purifier
dyson purified cool gen1
User manual
Assembling your machine
Use both hands to lift your machine out of the box, by its base.
Do not lift out by the loop amplifier.
Dyson Purifier Cool Gen1
Supplied with a combined glass HEPA+Carbon filter.
Getting started
Place the remote control on top
of the machine with the buttons
facing down.
Plug in and switch on.
Power and continuous monitoring
Stand-by on/off
Press the Standby on/off button on your Dyson purifying fan or remote
control to stop your machine. It will continue to monitor the air quality.
Continuous monitoring
Continuous monitoring is turned off by default. Once turned on,
it will always be active until you turn it off again.
With continuous monitoring turned on, your Dyson purifying fan will gather
particulate matter information, which is displayed on the LCD screen.
Continuous monitoring
Press and hold the Auto mode button on the remote control for 5 seconds
to turn it on. The LCD screen will indicate when continuous monitoring
is on or off.
Information menu
Press this button to scroll through the information being monitored by your
Dyson purifying fan.
Information about particulate matter and filter levels is shown on the LCD
screen.
When a particular type of pollutant causes air quality to decrease,
a symbol for the pollutant will show on the LCD screen.
Indoor particulate matter – 12 seconds
Monitors the current particulate matter with a
graph showing the last 12 seconds of data.
Particulate matter (PM10)
Larger microscopic particles up to 10 microns
in size, suspended in the air we breathe. These
include dust, mould and pollen.
Particulate matter (PM2.5)
Microscopic particles up to 2.5 microns in size,
suspended in the air we breathe. These include
smoke, bacteria and allergens.
Filters
The remaining filter life is shown
on the LCD screen and will indicate
when your filters need replacing.
Auto mode
Set your Dyson purifying fan to Auto mode and the on-board sensors will
intelligently adjust the settings of the machine according to the air quality.
Air quality: your machine will pause when the target air quality has been
reached, switching on again when the air quality levels drop.
Airflow speed: the airflow speed will increase until the target air quality
has been reached.
Airflow speed
Press the Airflow speed button to increase and decrease the airflow speed.
Oscillation
Press the Oscillation button to circulate the air around the room and scroll
through the oscillation settings from 0° to 350°.
Night mode and Sleep timer
In Night mode, your Dyson purifying fan will continue to monitor and
respond to changes, but only using its quietest settings – and with its
LCD screen dimmed.
Press the Night mode and Sleep timer button to scroll through the
timer options.
Changing your HEPA+Carbon filter
Before changing your filter, switch off and unplug your Dyson purifying fan.
The remaining filter life is displayed on the screen and will indicate when
your non-washable filters need replacing. Press the Information button
on your remote.
You’ll need to reset the filter life on your machine.
Dyson Purifier Cool Gen1
Supplied with a HEPA+Carbon filter.
To change your HEPA+Carbon filter, push down on the buttons either side
of your machine to release the outer cover. Push down on the tabs to remove
the filter.
Push the replacement filter into the outer cover and make sure the tabs click
into place.
Put the outer covers into position on your machine and push firmly until they
both click securely into position.
Plug in and switch your machine, and reset your filter life.
Resetting your HEPA+Carbon filter life
It’s important to reset your filter life after you have replaced your filter.
Resetting your HEPA+Carbon filter life
Press and hold the Night mode button on your remote control.
The display on your machine will countdown from five, the filter life will
be reset and your machine is ready to use.
Looking after your machine
To always get the best performance from your Dyson purifying fan,
it’s important to regularly clean it and check for blockages.
Cleaning your machine
If your machine is dusty, wipe with a damp lint-free cloth.
Look for blockages in the air inlet holes on the filter and the small
aperture inside the loop amplifier.
Use a soft brush to remove dust and debris.
Don’t use detergents or polishes to clean your machine.
Error codes
If your machine shows an error code, try turning it off and then on again.
If this doesn’t clear the error code contact Dyson Customer Care.
For more information and support for your machine go online:
www.dyson.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>