tp-link TL-WA850RE Range Extender Installation Guide
- June 6, 2024
- tp-link
Table of Contents
TP-link TL-WA850RE Range Extender
Power On
Plug the extender into a power outlet next to your router. Wait until its
Power LED turns solid on. Note: For safety, only plug the extender in the
direction as shown below.
Set-Up
Via the Tether App
- Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code.
- Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.
- Tap the+ button and select Range Extender. Note : If you cannot find your device, please refer to FAQ > Q1.
- Follow app instructions to complete the setup. The RE LED should turn solid on, indicating a successful connection to your router. Note: If the LED does not turn solid on, please refer to FAQ > Q2.
More Setup Methods
- Via a Web Browser
1. Connect your computer or smartphone to the extender’s network TP-Link_Extender.
2. Visit <http://tplinkrepeater.net> or <http://192.168.0.254> in a web browser. Create a password to log in.
3. Follow web instructions to complete the setup.Relocate
- Plugin the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.
- Wait for about 2 minutes until 3 or more LEDs light up. If not, relocate the extender closer to the router to achieve better signal quality.
- Tip: To place the extender for optimal Wi-Fi performance, access extender settings via the Tether app and go to Tools > Location Assistant, or simply scan the QR code to visit https://www.tp-link.com/support/faq/3103/.
Enjoy!
Connect your devices to the extender wirelessly or via an Ethernet cable,
then enjoy the internet. The password of your extended network is the same as
your host router.
Tip: You can also set up the extender in Access Point mode to transform
your existing wired network to a wireless one. For details, refer to the user
guide at https://www.tp-link.com/support/download/.
Access Extender Settings
- After setup, you can access extender settings via any of the methods below. You can reselect host networks, change extended network settings, and more.
- Note: If your extender and router use the same network name, Method 1 is recommended.
Method 1: Via the Tether App
- Connect your smartphone to the extender‘s or router’s network.
- Launch the Tether app, select your extender, and log in.
- View or change extender settings as needed.
Method 2: Via a Web Browser
- Connect your computer or smartphone to the extender’s network. If you are using a computer, unplug the Ethernet cable if any.
- Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in.
- View or change extender settings as needed.
LED Explanation
| LED | Status | Indication (For Range Extender Mode) |
|---|
RE
| On/Off
Blinking
| The extender is connected or not connected to your router’s wireless network.
WPS connection is in progress.
Wireless| On/Off| The extender’s wireless function is enabled or disabled.
Power
| On/Off
Blinking
| The extender is on or off.
The system is starting up or firmware upgrade is in
progress.
(Signal Strength)
|
On/Off
| Indicates the Wi-Fi connection between the extender and the router. More lit LEDs indicate better signal strength.
Ethernet
|
On/Off
| The Ethernet port is connected or not connected to a powered-on device.
Frequency Asked Question
What should I do if the Tether app cannot find my device during setup?
Try another method by following the steps below: 1. Connect your smartphone to the extender’s network TP-Link_Extender.
Launch the Tether app, and select your extender. Tip: If you have connected to the extender’s Wi-Fi but still cannot find your device, try turning off your cellular data.
What should I do if the RE LED doesn’t turn solid on after completing the setup via the Tether app or web browser?
- You may have entered an incorrect Wi-Fi password for your host router during the configuration. Check the password and try again.
- Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
- If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
- Try setting it up via the WPS button.
Safety Information
- Keep the device away from water, fire, humidity, or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use the device where wireless devices are not allowed.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU, and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www .tp-link.com/support/ukca
References
- 域名售卖
- Trying to Configure the Range Extender? | TP-Link
- TP-Link Community
- Download for TL-WA850RE | TP-Link
- CE Regulatory Compliance | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support
- Range Extender Setup Help | TP-Link
- How to place your wireless Range Extender for optimal reception and performance | TP-Link
- Regulatory Compliance | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>