VIZULO Blackbird Mushroom LED Street Luminaire Instruction Manual

June 6, 2024
VIZULO

VIZULO - logo Blackbird Mushroom LED Street Luminaire
Instruction ManualVIZULO Blackbird Mushroom LED Street Luminaire -
icon

VIZULO Blackbird Mushroom LED Street Luminaire * Depends on configuration. Check the label or technical specification.

Dimensions

VIZULO Blackbird Mushroom LED Street Luminaire -
Dimensions

Average Netto Weight

BBM
BG 032
8.3 Kg

VIZULO Blackbird Mushroom LED Street Luminaire - Average Netto
Weight| VIZULO
Blackbird Mushroom LED Street Luminaire - Average Netto Weight
2
---|---
Acceptable luminaire mounting angle relative to the ground.| Unacceptable luminaire mounting angle relative to the ground.

These limitations only apply when mounting the luminaire outdoors!

WARNING!

  • Do not touch LED modules!
  • Do not put any tools or other items on LED modules!
  • In case any LED is physically damaged (example shown below) the warranty is void.

VIZULO Blackbird Mushroom LED Street Luminaire - Average Netto Weight
3

LED Power CCT Risk group Remarks
Olson Square 5 … 100 W ≤ 5700 K RG1 after TBC m* Label required
Luxeon 5050 5 … 100 W ≤ 5700 K RG1 after TBC m* Label required
Duris S8 5 … 100 W ≤ 5700 K RG1 after TBC m* Label required

*The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than shown in the table above is not expected.

Standard configuration

VIZULO Blackbird Mushroom LED Street Luminaire -
configuration

VIZULO Blackbird Mushroom LED Street Luminaire - configuration
2

Configuration with terminal block

VIZULO Blackbird Mushroom LED Street Luminaire - Configuration with terminal
blockVIZULO Blackbird Mushroom LED Street Luminaire - Configuration
with terminal block 2VIZULO Blackbird Mushroom LED Street Luminaire -
Configuration with terminal block 3VIZULO Blackbird Mushroom
LED Street Luminaire - Configuration with terminal block
4

Watertight cable connector has to be ordered separately

Article Description
70000313 2-pole terminal block with PE
70000304 4-pole terminal block with PE
70000314 2-pole terminal block
70000315 4-pole terminal block

VIZULO Blackbird Mushroom LED Street Luminaire - Configuration with terminal
block 5

ATTENTION! In the case of the NEMA/ZHAGA Socket.
IP66 applies only for luminaire body and for connection between luminaire body and NEMA/ZHAGA Socket, and do not apply to any mounted control
device and connection between the control device and NEMA/ZHAGA Socket.

MCB/Inrush current table

Tridonic LED driver

Standard/High density| In-rush current
(peak/duration)| B1OA| B16A| B20A| 8254| C1OA| C16A| C20A| C25A
BB 8-16 LED, 8-33 W| 36 A (195 us)| 10| 16| 21| 28| 16| 21| 35| 44
BB 16-24 LED, 19-60 W| 32 A (267 ps)| 7| 12| 15| 19| 11| 20| 25| 30
BB 32-40 LED, 28-80 W| 37 A (287 its)| 7| 12| 15| 19| 11| 20| 25| 30
BB 40-64 LED, 44-100 W| 56 A (280 us)| 5| 8| 11| 14| 10| 16| 22| 22
BB 64-84 LED, 88-100 W| 84 A (255µs)| 3| 5| 8| 11| 6| 10| 16| 17
BB 84 LED, 92-100 W| 112 A (2801.6)| 2| 4| 5| 7| 5| 8| 11| 11
BB 96 LED, 100 W| 121 A (287 p.$)| 2| 3| 5| 6| 3| 5| 9| 10
Tridonic LED driver

ECO| In-rush current
(peak/duration)| B10A| B164| B204| B254| C104| C164| C204| C254
BBE 6-10 LED, 12-33 W| 36 A (195 ps)| 10| 16| 21| 28| 16| 21| 35| 44
BBE 6-12 LED, 16-59 W| 32 A (267 ps)| 7| 12| 15| 19| 11| 20| 25| 30
BBE 10-18 LED, 19-80 W| 37 A (287 ps)| 7| 12| 15| 19| 11| 20| 25| 30
BBE 16-34 LED, 37-100 W| 56 A (280 ps)| 5| 8| 11| 14| 10| 16| 22| 22
BBE 20-48 LED, 46-100 W| 84 A (255 Rs)| 3| 5| 8| 11| 6| 10| 16| 17
BBE 48 LED, 46-100 W| 121 A (2801.6) _| 2| 3| 5| 6| 3| 6| 9| 10
Osram LED driver

Standard/High density| In-rush current
(peak/duration)| B10A| B16A| B20A| B25A| C10A| C16A| C20A| C25A
BB 8-16 LED, 8-40 W| 45 A (195 ps)| 10| 17| 21| 28| 16| 27| 33| 44
BB 20-32 LED, 18-66 W| 53 A (267 ps)| 7| 12| 15| 20| 11| 19| 24| 32
BB 32-48 LED, 28-96 W| 57 A (287 ps)| 7| 12| 15| 20| 11| 19| 24| 32
BB 48-84 LED, 52-100 W| 62 A (280 ps)| 4| 8| 10| 14| 6| 12| 16| 22
BB 84 LED, 90-100 W| 114 A (255 ps)| 3| 6| 7| 10| 5| 9| 12| 16
BB 96 LED, 100 W| 119 A (280 Rs)| 2| 4| 6| 8| 3| 7| 9| 12
Osram LED driver

ECO| In-rush current
(peak/duration)| BlOA| B164| B20A| B25A| ClOA| C164| C20A| C25A
BBE 4-8 LED, 11-41 W| 45 A (195 ps)| 10| 17| 21| 28| 16| 27| 33| 44
BBE 6-16 LED, 16-66 W| 53 A (267 its)| 7| 12| 15| 20| 11| 19| 24| 32
BBE 12-24 LED, 28-96 W| 57 A (287 its)| 7| 12| 15| 20| 11| 19| 24| 32
BBE 18-44 LED, 41-100 W| 62 A (280 its)| 4| 8| 10| 14| 6| 12| 16| 22
BBE 48 LED, 100 W| 119 A (255 ps)| 2| 4| 6| 8| 6| 7| 9| 12

Terms of use and maintenance
Before the luminaire is turned on, it should be mounted according to this mounting instruction or any other applicable regulations.
Mounting instructions
Mounting of luminaire must be performed by a qualified person according to the following instructions:

  • The warranty of the luminaire does not apply if the mounting of the luminaire has been performed in precipitation (rain, snow, hail).
  • The warranty of luminaire does not apply if a control system unauthorized by VIZULO or an inapplicable LED driver has been used to drive the luminaire.
  • The warranty of luminaire does not apply if it has been used in an unsuitable ambient temperature or has been supplied by voltage outside of the specified range.
  • The warranty of the luminaire does not apply if the LED driver program has been changed in any way.
  • The warranty of the luminaire does not apply if the logged history data of the LED driver has been deleted without the permission of VIZULO.
  • The warranty of luminaire does not apply, if it has been mounted in unspecified angles or upside down (luminaire glass directed up), or it has been completely submerged underwater.

Safety instructions
Any actions with the luminaire must be performed by a qualified person, who is certified according to with national regulations and requirements.
To prevent any accidents person installing the luminaire must follow national safety requirements and following instructions:

  • The label containing technical parameters of the luminaire has to be studied before the work on it has begun.
  • Any luminaire build or design changes are prohibited.
  • The luminaire must be used in good technical condition and according to with this instruction.
  • Only VIZULO authorized spare parts and accessories can be used to repair the luminaire.
  • The repair of the luminaire has to be performed by a qualified and certified person.

Maintenance and repair
Luminaire has to be disconnected from the electrical grid before it is opened and/or repaired!
The person working with the luminaire must follow national regulations and legislations that apply to the maintenance and testing of electrical or electronic appliances.

  • The luminaire may need to be cleaned depending on its environment. Only a damp cloth or a sponge may be used to clean the luminaire. Use only household detergents diluted by water.
  • Only VIZULO authorized spare parts may be used for the luminaire.
  • Instruction for changing spare parts must be requested from VIZULO and studied before the repair is attempted.
  • LED modules, lenses, and LED drivers can be changed on an installed luminaire, but it is advised to perform this task indoors to avoid water entering the luminaire.
  • Spare parts (lens, LED modules, and drivers) should be ordered from the information available on the luminaire label.

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.

Caution, risk of electrical shock
In case the mains cable is damaged, the luminaire is no longer usable, and it must be either recycled or repaired.
The repair can only be performed by VIZIO. Contact either your direct sales manager or look for contact information on our home page – www.vizulo.com.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals