Shenzhen Miqi Commerce HB309 Multi-Function Keyboard with Touchpad User Manual
- June 6, 2024
- Shenzhen Miqi Commerce
Table of Contents
Shenzhen Miqi Commerce HB309 Multi-Function Keyboard with
Touchpad
Package Contents
- 1x Keyboard with touchpad
- 1x User Manual
Specifications
| Bluetooth Version | BT 5.0 |
|---|---|
| Keyboard Size | 250.54×174.04×5.8mm（9.86×6.85×0.23inch） |
| Touchpad | PixArt chip, with left and right-click control keyboard |
| Operating Range | 10 meters (32.8ft) |
| Stand-by Time | 30 days |
| Charge Time | < 1.5 hours |
| Uninterrupted Work Time | 60 hours |
| Lithium Battery Capacity | 200 mAh |
| Lithium Battery Life | 3 years |
| OS Supported | Android, Windows, iOS |
Keys and Functions
To use the shortcut keys, hold the “Fn” key while pressing the desired shortcut key.
Pairing Instructions
Step 1. Switch On/Off to On to turn your keyboard on.
Step 2. Press the “Fn + C” keys together to enter pairing mode.
Step 3. Verify your device’s Bluetooth® settings are on. Select Settings
– Bluetooth – On.
Step 4. Select “Bluetooth Keyboard” from your device’s list of available
devices to complete pairing.
Step 5. Select “Bluetooth Keyboard”, the indicator will turn off after
successfully paired.
Touchpad Function
Keyboard Electrical Parameters
| Working voltage | 3.0~4.2V | Keyboard working current | ≤ 2.5mA |
|---|---|---|---|
| Touchpad working current | ≤ 6mA | Key life | 3 million strokes |
| Key strength | 50g~70g | Working temperature | -10℃~+55℃ |
Power Saving Mode
The keyboard will enter sleep mode when idle for 30 minutes. To activate it, press any key and wait for 3 seconds.
Charging your keyboard
- Plug the Type-C end of the charging cable into the keyboard and the other USB end into your preferred USB charger. (Charging cable and USB charger are not included.)
- In charging, the power indicator will turn red. Generally, it takes approximately 1.5 hours for a full charge. (Output: DC 5V/500mA.)
Trouble Shooting
If your device doesn’t respond to the keyboard, try the following steps.
- Restart your device.
- Turn your keyboard off and back on.
- Forget and re-pair your keyboard.
- If your keyboard doesn’t establish or maintain a Bluetooth connection, reset the Bluetooth module by charging your keyboard. After charging, if your keyboard doesn’t operate correctly, please contact our Customer Service.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>