Victure RX1800 AX1800 Dual Band Wi-Fi 6 Router User Manual

How to use your AX1800 Dual-Band Wi-Fi 6 Router
Scan the QR code below or search “Vkture IPC ” on youTube to view more functions

https://www.youtube.com/channel/UCe6_pkm-RbICKSI4WcYt8Qw?view_as=subscriber

Customer service
Any questions or problems, please feel free to contact us
·
Warranty
Send us your Order Screenshot via email net.support@govicture to extend the warranty to 12 months
Lifetime professional tech support is provided by Victure.
Package Contents
RX180Clx1
Ethernet Cablex1n
power Adapterx1
User Manualx1

Product Diagram

Router Setting
Method 1: PC web setting

1. Plugin, connect a LAN port of your modern or the Broadband network port to the WAN port of RX1800 with the Ethernet cable until the 2.4GHz and 5GHz lights are on. Default VVi-Fi 2.4G SSID: Victure-XXXX
   Default Wi-Fi 5G SSID: Victure-XXXX-5G
   Default Wi-Fi Password:XXXXXXXX
   (The default password is on the back of the router.)

2. Open the Wi-Fi list in the lower right corner of the computer desktop, (picture 1 ) Connect Victure->000( or Victure-XXXX-5G first. (The default SSID and password are on the back of the router. )

3. Visit my link.cn or 192.168.16.1 via PC web, type Default Username/ Password: admin/admin. (The default account and password are on the back of the router. ).

4. Select your WLAN connection mode according to set instructions. For example Dynamic IP, PPPOE.

5. Set 2.4G, 5G Wi-Fi name ( SSID), and password. ( SSID and password are 8-32 digits, supports numbers, letters, and only # $% A & *0-. ) After clicking save, please wait for one minute according to the screen prompts, then reconnect to the Wi-Fi to get online.

Method 2: Phone setting

1. Plugin, connect a LAN port of your modern or the Broadband network port to the WAN port of RX1800 with the Ethernet cable until the 2.4GHz and 5GHz lights are on.

2. Open Wi-Fi list in phone settings(picture 2, Connect Victure-)00C< or Victure-XXXX-5G first. (The default SSID and password are on the back of the router. )

3. Visit my link. cn or 192.168.16.1 via Mobile browser, type Default Username/Password: admin/admin. ( The default account and password are on the back of the router. )

4. Select your WAN connection mode. For example Dynamic IP, PPPOE.

5. Set 2.4G, 5G Wi-Fi name ( SSID), and password. ( SSID and password support numbers, letters and only! # $% A & * 0- . ) After clicking save, please wait for one minute according to the screen prompts, then reconnect to the Wi-Fi to get online.

USB NM +HDD Configuration Steps
Samba Visit steps

1. Enable Samba Visit function first, type\\myblink.cn in the computer address field to access the USB files.
2. Type Default Username/Password to login (Default Username /Password: admin/admin).
3. Enjoy USB share files.

FTP Visit steps

1. Enable the FTP Visit function first, then click ftp://myblink.cn or computer address field to login.
2. Type Default Username/Password to login(Default Username /Password: admin/admin).
3. Enjoy USB share files.

Troubleshooting

Q: How to restore the router to the factory setting?
A•. Press the Reset button for about 5-8 seconds and release, when the 2.4GHz and 5GHz lights go out, it means the reset is successful.
0: What if I want to change the default VVi-Fi name (SSID) and password?
A: Log in to the setting page, click Wi-Fi settings, then modify the Wi-Fi name ( SSID) and password, and click save.
Q: How to set up the router by cable? A:

1. Plugin and connect a LAN port of your modem or the Broadband network port to the WAN port of RX1800 with the Ethernet cable, until the 2.4GHz and 5GHz lights are on.
2. Use the Ethernet Cable in the package, plug one end into the LAN port of the router and one end into the network port of the computer.
3. Refer to PC Web setting steps 2-5.

SPECIFICATIONS

Voltage: DC 12V
Product name: AX1800 Dual Band Wi-Fi6 Router
Model: AX1800
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to  correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and receiver.
·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
·Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>