Victure BM45 Video Baby Monitor User Manual
- June 12, 2024
- Victure
Table of Contents
User Manual
BM45
Video Baby Monitor
Attention
Thank you for purchasing Victure Video Baby Monitor BM45. Now you can see
and hear your baby sleeping in the other room or you can monitor your elder
kids in their playroom.
Before you use the device, please read this User Manual carefully.
- This product should be assembled by adults
- Keep small parts away from children when assembling
- This product is not a toy, do not allow children to play with it as a toy.
- This baby monitor is not a substitute for responsible adult supervision
- Do not place the baby monitor cables in the cot or with the baby arm’s reach (at least 1 meter away)
- Keep the cords out of reach of children
- Do not use the baby monitor near water or a heat source-.
- Only use the power adapters provided
- Do not touch the power plug with sharp or metal objects
Package Content
Overview of Your Baby Monitor
Controls ( Baby Unit)
1. Camera Lens
2. Microphone
3. Power Button
4. Network Antenna| 5. Temperature Sensor
6. USB Power Interface
7. Power Indicator
8. Pair Button
---|---
Receiver (Parent Unit)
9. Speaker
10. Power Button
11. Menu/Back Button
12. Navigation Key
13. Talk and Zoom Button
14. Microphone
15. Jack plug
16. Volume +/-
Setting up Your Baby Monitor
Controls ( Baby Unit)
— Connecting the power adapter for the baby unit.
- Connect the small plug of the adapter to the Baby Unit and the other end to the power socket
- Only use the enclosed adapter (5V DC/1.5A
WARNING
Strangulation Hazard: Children will STRANGLED in cords. Keep this cord out of
the reach of children(more than 1 meter away)
Parent Unit Power Supply
— Connecting the power adapter for the
Parent Unit if it in low battery status.
- Connect the small plug of the adapter to the Baby Unit and the other end to the power socket
- Only use the enclosed adapter (5V DC/1.5A)
- Press and hold the Power Button on the parent unit to turn it ON.
Monitoring Screen Icons
1. Signal strength indicator
2. Camera number
3. Vocal/Mute mode
4. Lullabies
5. Motion Detecting
6. Feeding Timer| 7. VOX mode
8. Temperature Alarm
9. Baby room’s temperature
10. Time
11. Battery indicator
---|---
Menu Function (Parent Unit)
Camera
User can add 4 camera at most.
Select “Camera”–Select” Add Camera”–Press “OK”–Press the Pairing Button on
Baby Unit.
View
User can change view of different camera(if add different camera)
Lullabies
User can choose lullaby to play from lullabies list. It will automatically
single cycle once you choose one of lullaby; If chose ALL, it will
automatically repeat all lullabies list.
Feeding Timer
User can choose the time to remind for feeding kids. After selecting, count
down bar will appear in video view interface, when up to predefined time,
monitor will alarm for 5 seconds.
VOX
Select Sendivity level/OFF, user can hear alarm once any abnormal sound or
noice happened.
Setting
Language Setting
Include 5 languages( English, Deutsch, Italiano, Francais, Espanol).
Brightness Setting
Select brightness level.
Date &Time
Set date and time.( Year/Month/Day)
Temperature Alarm
Baby camera detects baby room’s temperature. User can set the temperature
limit. Alarm for 5 seconds when over/below limits.
Motion Detection
By this function selected to ON, user can hear alarm once any movement
happened.
Contact Us
User can Contact Us by Email:
[email protected] com when you have
any questions with this product.
Power Saving
Select ON/OFF. Parent Unit Display sleep automatically within 10 seconds in
ideal status. Press Power Button to wake up Display.
Default Settings
Select ON/OFF to restore factory default setting.
Technical Features
Frequency: FHSS 2.4GHz
Operating Temperature: -10°C~+45°C(14°F~113°F)
Operating Humidity: <85%
Parent Unit (Monitor)
LCD: 4.3 inch TFT
Resolution: 480X272
Battery: Li-Polymer 3200mAnh
Power Input: SV ***1.5A
Speaker: 8Ω/W1
Baby Unit (Camera)
Wireless Connection: FHSS 2.4G
Camera Resolution: 0.3MP
Video Resolution: VGA
Power Input: SV ****1.5A
Troubleshooting
| Problems | Possible causes | Solutions |
|---|
No connection is established: The Parental Unit does not emit any sound when
there is noise coming from the baby’s room| The volume is perhaps switched
off.| Check the volume is not on position «0».
The Parental Unit may be beyond the range of the Baby Unit;
therefore, the connection is interrupted.| Try reducing the distance between
the appliances so that the power
signal indicator displays at least one bar.
Why does the appliance transmit a high-pitched sound?| The units may be too
close.| Ensure that they are at least 1 metre apart.
The volume of the Parental Unit is too high.| Lower the volume on the Parent
Unit.
Why are there sound interferences between the two units?| Acoustic feedback
occurs when the two units (Parental and Baby) are too close.| Distance the two
units and ensure that there is a minimum distance of 1 metre between the two.
The image does not work and is not clear when I am within the recommended 250
metres| This recommended
range is only valid in the open, outside. It is
limited inside by partitions or walls that are too thick, creating an
obstacle.| Approach the camera to the receiver avoiding walls and partitions.
Inside, the range does not exceed 30 metres.
Warranty
All Victure products come with a limited warranty of 12 months from the date
of purchase. And we have professional customer service team for your support
as soon as we can.
If you have any questions or confusions about our product or warranty, please
feel free to contact us. We will do our best to help you solve the problem
until you are satisfied.
Victure Customer Care Service Mailbox:
[email protected]
Victure Official Facebook: Search”Victure Video Baby Monitor”
Complaint Mailbox: [email protected]
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference m a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Made in China
Version 1.0