Shenzhen Liberty Smart Technology MIC303 Wireless Microphone User Guide

Features

• Built-in microphone
• Built-in speaker
• LEDs indicator
• Built-in Lithium rechargeable battery
• TF/micro SD card slot
• Micro-USB charging cable

Contents

• Wireless Microphone
• Charging Cable
• 1 Year Warranty
• User Manual

Controls and Indicators

Charging the Microphone

• To charge the microphone, attach the small end of the micro USB cable to the USB charging port on the underside of the microphone. Attach the large end to the USB port on a computer, USB charging device, or a 5V USB adaptor.
• The RED light will be ON when charging, The RED light will be OFF when Full

Pairing the Microphone

• 1. Long press the Power button. A tone will be heard and the LED indicator will flash BLUE.
• 2. Set your mobile device to search for Bluetooth devices. When your mobile device finds the microphone, select Mic303 from the list of found devices.
• 3. After a successful pairing, a tone will be heard and the LED indicator will turn solid BLUE.
  Note: If a previously paired device is in range when the microphone is turned on, the microphone will connect to it automatically.

On an IOS or Android Device
Go to SETTING >BLUETOOTH
(Make sure Bluetooth is turned ON)

Using the Microphone

Power on/off and change mode
Long press the Power button for 2-3 seconds to turn the microphone ON.
Long press the Power button for 2-3 seconds again to turn the microphone OFF.
Press to change mode between TF, USB,line-in, Bluetooth mode
Adjusting Volume
Raise the MIC Vol slider to increase microphone volume. Lower the slider to decrease.
Raise the Music Vol slider to increase speaker volume. Lower the slider to decrease.
Adjusting REMIX
Raise the REMIX slider to increase the REMIX level from the microphone.
Lower the slider to decrease.
Playing Music
To enjoy music wirelessly on your microphone, make sure you are paired to a
Bluetooth-enabled device. Once paired, you can control media playback and volume adjustment with the controls on your paired device.
Magic Sound
Quickly Press the ONCE REC button to eliminate the original song
Quickly Press ONCE Again to turn on the original song.
Hold on 2 seconds the REC button to change the Magic sound total have 5 magic sounds can be choose.

Specification

• Support TF and SD Card, support WAV. MP3;Max expansion: 32GB /Bluetooth
• Support Micro-USB line in, Not include 3.5mm cable
• Input: DC5V, 500mA
• Speaker specifications: φ45mm, 4Ω 5W
• Bluetooth Version: V4.2
• Wireless Freq: 2404-2480MHz
• Dimensions: 255*78mm
• Weight: 300g
• Distortion: <1%
• Battery Capacity: 1200mAh
• Material: ABS
• Charging Time: 5 hours
• Playing Time: around 8-9 hours
• Transmission Range: approx. 10m

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  RF Exposure Information
  The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

71x102mm

Documents / Resources

| Shenzhen Liberty Smart Technology MIC303 Wireless Microphone [pdf] User Guide
MIC303, 2AZ4A-MIC303, 2AZ4AMIC303, MIC303 Wireless Microphone, Wireless Microphone, Wireless Microphone
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>