Calix u4 GigaSpire BLAST Instructions

Calix u4 GigaSpire BLAST

NOTE: This Safety and Regulatory Statements Guide applies to all GigaSpire devices that may or may not include a Wi-Fi radio. Disregard any statements made here if the feature or function is not present on any particular model.

Before you Begin

IMPORTANT SAFETY INSTRUCTIONS

When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all the instructions listed here and/or in the user manual before you operate this device. Give attention to all safety precautions. Retain the instructions for future reference.
• Always use caution when handling live electrical connections.
• Do not install electrical equipment in wet or damp conditions.
• Ensure that the power source for the system is adequately rated to assure safe operation and provides current overload protection.
• Do not allow anything to rest on the power cable, and do not place this product where people will stand or walk on the power cable.
• This unit must only be used with the certified power adapter model inside the package, which complies with the requirement of a limited power source.
• Installation of this device must be in accordance with national wiring codes and conform to local regulations and electrical codes.
• Do not use any accessories other than those approved by the manufacturer or your service provider. Use of non-original or non-approved accessories may result in loss of performance, damage to the product, fire, electric shock or injury, and may violate regulations. The warranty does not cover product failures that have been caused by use of non-original or non-approved accessories.
• It is recommended that the customer install an AC surge protector in the AC outlet to which this device is connected. This is to avoid damaging the device by local lightning strikes and other electrical surges.
• The minimum distance between the user and/or any bystander and the radiating structure of the transmitter varies based on the country where it is deployed. For US deployments, 27 cm is the minimum distance while Canada requires a minimum of 33 cm.
• The pluggable external power supply provided with the unit should be mounted indoors. If other power supplies are employed, they should be LISTED ITE with a Limited Power Source (LPS) output or LISTED with a National Electric Code (NEC) Class 2 output.
• All installation methods shall be in accordance with national and local regulations and practices. The wiring method should include the use of Listed wire/cable acceptable for the application per the National Code, and should be one that an Authority Having Jurisdiction (AHJ) can approve per the Code.
• For US products, no wiring to the product should be exposed in lengths beyond 140 feet, as the circuits should avoid exposure to accidental contact with lightning and power conductors in accordance with NEC Article 725-57 (NEC 2005). The installer should also consider Articles 210, 240, 250, 770, and 810 of the NEC.

ENVIRONMENTAL CONDITIONS

Maximum environmental values during use: Temperature: 0° C to +40° C (32° to 104° F), Humidity 10% to 90% RH, non-condensing, -200 to 10,000 feet altitude

Federal Communications Commission (FCC)

INTERFERENCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.

CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
CAUTION: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.

ADDITIONAL CONSIDERATIONS
The country code selection is for non-US models only and is not available on any US models. Per FCC regulations, all Wi-Fi products marketed in the US must be fixed to US operational channels only.

RF FREQUENCY REQUIREMENTS
This device is for indoor use only when using all channels in the 5.150 GHz – 5.250 GHz, 5.25 – 5.35 GHz, 5.47 – 5.725 GHz, and 5.725 – 5.850 GHz frequency range. High power radars are allocated as primary users of the 5.25 GHz – 5.35 GHz and 5.47 – 5.725 GHz. These radar stations can cause interference with and/or damage this device. It is restricted to indoor environment only.

FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 27cm between the radiator & your body.

Industry Canada Requirements – English
The manufacturer declares that this product is in conformity with the requirements and other relevant provisions of the following Canadian standards:

• CAN ICES-003(B)/NMB-003(B)
• This device complies with ISED’s licence-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

CAUTION:

• The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
• The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specifi ed for point-to-point and non-point-to-point operation as appropriate.
• Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

RADIATION EXPOSURE STATEMENT
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 33cm between the radiator & your body.

European Union
DISPOSING OF AND RECYCLING YOUR PRODUCT
WEEE Directive: Requirement according to WEEE directive 2012/19/EU Disposal of old electrical and electronic equipment (Applicable in the European countries with separate collection systems).
This symbol on the product indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. Calix offers take-back and recycling services for products in many locations around the world. Customers are advised to contact the local Calix representative for further information.

CALIX, INC. AND THE ENVIRONMENT
At Calix Inc., we understand and are committed to reducing any impact our operations and products may have on the environment. To minimize this impact, Calix Inc. designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging.

ROHS COMPLIANCE
This equipment meets the requirements detailed in the European RoHS Directive 2011/65/EU.

For Radio Equipment Only
You must set the correct country code with the set WLAN country-code command to avoid violating local radio spectrum laws. This command sets the selectable channel range and transmit power level so that a WLAN connection can be established. For more information about country codes, see the hardware guide for your device.

This device complies with the essential requirements of the Radio Equipment directive: 2014 / 53 / EU. The following test methods have been applied to prove presumption of conformity with the essential requirements of the Radio Equipment directive: 2014 / 53 / EU: EN 300 328 (2.4 GHz), EN 301 893 (5 GHz) EN 62311:2008, EN 50385, EN 301489-1, EN 301489-17, EN 62368-1.

RADIATION EXPOSURE STATEMENT
The minimum distance between the user and/or any bystander and the radiating structure of the transmitter is 27 cm for US deployments and 33 cm for Canadian deployments

| NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY
---|---
BE| BG| CZ| This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference.

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France where restrictive use applies. This device may not be used for setting up outdoor radio links in France and in some areas, the RF output power may be limited to 10 mW EIR P in the frequency range of 2454 –2483.5 MHz. For detailed informa- tion, the end-user should contact the national spectrum authority in France.

This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, OL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY

DK| DE| EE
IE| EL| ES
FR| HR| IT
CY| LV| LT
LU| HU| MT
NL| AT| PL
PT| RO| SE
SK| FI| SE
UK| LI| IS
NO| TR| CH

Usage Notes

• To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the products per the country where the equipment is deployed.
• Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 5 GHz within the EU.

5 GHz Wireless Frequency and Channel Operation in EEC Countries
The table below provides a list of allowable frequency ranges and channels in various EEC countries.

5.15-5.35 and 5.47-5.725 GHz (Channels 36, 40, 44, 48, 52, 56,

60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140)

| Denmark, Germany, Iceland, Finland, Netherlands, Norway, Poland, Sweden, Slovenia, Luxembourg, U.K., Ireland, Slovak, Switzerland, Hungary, Italy
5.15-5.35 GHz and 5.725-5.875 GHz (Channels 36, 40, 44, 48,

52, 56, 60, 64)

| Czech Republic

Declaration of Conformity

Hereby, Calix Inc. declares that this Broadband wireless Access Terminal is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available online from the Calix Declarations site (https://www.calix.com/declarations)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>