Mount for ACCSOON CineEye 2S Pro: Wireless Video Transmitter User Manual

The ACCSOON CineEye 2S Pro Wireless Video Transmitter and Receiver is a professional-grade device that enables high-quality wireless video transmission with low latency. The device features dual-band transmission, with a range of up to 1200 feet, and supports both SDI and HDMI inputs. It also supports camera control, audio transmission, and can transmit to up to four receivers. The CineEye 2S Pro comes with a 1.3-inch OLED display, DC and battery power supply support, and is firmware upgradable. The product includes a transmitter and receiver, along with a range of accessories such as a 1/4 screw, group knob, battery lock, camera control interface, and more. The user manual provides detailed instructions on how to install and operate the device, including information on group settings, LED display, data rate setting, channel setting, network reset, app monitoring, firmware updates, and troubleshooting tips. The manual also includes information on the product warranty and how to contact Accsoon for support. Overall, the ACCSOON CineEye 2S Pro Wireless Video Transmitter and Receiver is an advanced device that is ideal for professional videographers who require high-quality wireless video transmission with low latency.

ACCSOON CineEye 2S Pro Wireless Video Transmitter and Receiver

Product Features

• High reliability dual band (2.4G and 5G) transmission Transmission range of up to 1200 feet
• Very low latency (<0.06 seconds)
• SDI in and HDMI in
• High quality audio transmission
• Supports transmission to up to 4 receivers
• Camera Control supported
• Professional monitoring App for iOS and Android
• 1.3 inch OLED display
• DC and battery power supply supported
• Firmware upgradable

In the Box

Transmitter

1. 1/4 Screw
2. Group Knob
3. Battery Lock
4. Camera Control Interface
5. 1.3 Inch OLED
6. Left Key
7. Right Key
8. Menu/OK Key
9. Power Button
10. HDMI Loop Out
11. HDMI In
12. DC Port
13. Antenna Connector (RP-SMA Male)

Receiver

1. 1/4 Screw
2.  Group Knob
3.  Battery Lock
4. Camera Control Interface
5. 1.3 Inch OLED
6.  Left Key
7.  Right Key
8.  Menu/OK Key
9.  Antenna Connector (RP-SMA Male)
10.  Power Button
11. SDI Out
12. HDMI Out
13. DC Port

Typical Application

Operation Instructions

Install Instructions

1. Install the antennas as demonstrated.
2. Use the hot/cold shoe mount adapter to install the CineEye 2S Pro onto the camera or camera cage.
3. Use a NP-F970/F750/F550 battery or DC source to power the CineEye 2 Pro.
4. Connect camera output via HDMI to transmitter HDMI input port.
5.  Connect receiver to the monitor (monitor not included in this product).

Turn On/Off

• A: Turn on – Hold the power button for 1 seconds
• B: Turn off – Hold the power button for 3 seconds

Group Settings

1.  CineEye 2S Pro uses a group knob to pair the transmitter and receiver, both the transmitter and the receiver have a group knob on the side. The transmitter and receiver will pair automatically if their group knobs are in the same position (group number is the same), otherwise they will not pair and cannot communicate.
2. If users want to connect more than one receiver to the same transmitter, set all of the receiver’s group numbers to the same as the transmitter. Up to four receivers can be paired to the same transmitter.
3.  I f multiple CineEye 2S Pro units are being used in the same area, each transmitter and receiver pairings needs to have a different group number.

Note: If the group setting has changed, please bring the transmitter and receiver in close range, or the pairing may fail. If group setting has changed after power on, the change will take effect after reboot.

LED Display

1.  Input video info
2.  Input audio info
3.  Current group setting
4. Battery level/DC input
5. Connection status
6.  Current 5G WiFi channel

Connection Status：

• Transmitter: The connection status indicates how many devices are connected, if no devices are connected the unit will display “0”.
• Receiver: The connection status will display “1” if the receiver is connected to a transmitter, or will display “0”.

Data Rate Setting

1.  High Quality Mode
2. Normal Mode (Default setting)
3. Speed Mode

Setting steps:
Click the “Menu” button to enter “Data Rate Setting”->choosing a data rate mode->click “Menu” button to take effect.

Channel Setting

1.  Only the transmitter has the “Channel Setting” menu.
2. The default setting is “Auto” which means the transmitter will select a channel with the least interference automatically after power on.
3. If users want to select a channel manually, please follow below steps: Click “Menu” button to enter “Channel Setting” menu->choosing a channel->click “Menu” button to confirm-> Choosing “Yes” ->Click “Menu” button to reboot the transmitter and the setting will take effect.

Network Reset
Only the transmitter has the “Network Reset” menu. Users can reset the WiFi SSID and password to factory settings by “Network Reset” menu.

Setting steps：
Click “Menu” button to enter “Network Reset” menu->choosing “Yes”->click “Menu” button to confirm->Choosing “Yes” ->Click “Menu” button to reboot, the SSID and password of the 5G WiFi will be reset to factory settings.

App Monitoring

1. App download
   Please download the App (Accsoon Go) from the Google Play or iOS App Store.

2. Connect the App to the CineEye 2 Pro transmitter
   Launch the “Accsoon Go” app and then select “CineEye 2S Pro”, open the WLAN (Wirless/WiFi) settings page of the mobile devices, then choose the CineEye 2S Pro WiFi and connect to it. The name of the CineEye 2S Pro WiFi is “CineEye2Pro_XXXX” and the default password is “12345678”.
   

3. Monitoring
   Return to Accsoon Go and ensure CineEye 2S  Pro is selected, click “Monitor” to enter the monitoring page and you will be able to monitor the live feed of the camera.
   Note: CineEye 2S Pro has two WiFi signals, one is 2.4G and another is 5G, the 2.4G WiFi name is “CineEye2-Pro-GroupX”, please don’t connect to this WiFi.

Firmware Update

1. Firmware download
   Make sure your mobile phone has internet access, then launch “Accsoon Go” and s elect “CineEye 2S Pro”, Click “Firmware Update”, then the App will check if there is an update.Click “Download” button to download the firmware if there is an update available.
   

2. Update
   After the firmware is downloaded, connect the CineEye 2S Pro receiver to the transmitter and then connect the mobile devices to the transmitter. Go back to the App and click “Next” to update.
   WARNING:
   1. The battery level of the CineEye 2 Pro should be above 50% before updating.
   2. Don’t turn off the CineEye 2 Pro before the updates are complete.

Specification

Warranty

Warranty Period

1.  If there is a quality problem that occurs within 15 days after receiving the product, we will provide complimentary maintenance or replacement.
2. The warranty period for transmitter and receiver units is one year. Within the warranty period, if under the usage of instruction manual for any product problem Accsoon will offer repair service for free.
3. The accessories and cables warranty period is 3 months.

Warranty Exclusions

1. Unauthorized maintenance, misuse, impact damage, liquid infiltration, or modification.
2. Incorrect use of the product or altering the label and warranty sticker.
3. The warranty period has been exceeded.
4. Damage due to fire, flood, lightning, etc.

Warranty Process
Customer shall contact the local dealer to solve their problem. If there is no local dealer available, please contact Accsoon directly via email (support@accsoon.com) or our website (www.accsoon.com). You will get detailed information, and Accsoon reserves the right to review the damaged products.

Q&A

Receiver cannot connect to transmitter

1. Please make sure the transmitter and receiver have the same group setting.
2. Please check that all antennas are tightened well.

No video displayed

1. Please ensure the HDMI cable is plugged into the “HDMI In” port of the transmitter
2. Please check if the output format of the camera is compatible with the CineEye 2S Pro input formats and check if the camera has video output enabled via the HDMI port.

Video is choppy

1. Please check if the antennas are tight.
2. Please make sure there is no cable around the antenna.
3. Please switch to another channel manually.

Mobile devices can’t see the CineEye 2S Pro WiFi

1. Please check if your mobile devices support 5G WiFi.

Mobile devices can’t connect to CineEye 2S Pro

1. CineEye 2 Pro has two WiFi networks available, one is 2.4G and another is 5G, the 2.4G WiFi name is “CineEye2-Pro-GroupX”, please don’t connect to this WiFi.

More details about the product please visit www.accsoon.com
This document is subject to change without notice.
Accsoon is a trademark of Accsoon Technology Co., Ltd.
Copyright 2020 Accsoon. All rights reserved

Website:www.accsoon.com
E-mail:support@accsoon.com
Chengdu Accsoon Technology Co.,Ltd

SPECIFICATION

Lock, Camera Control Interface, 1.3 Inch OLED, Left Key, Right Key, Menu/OK Key, Power Button, HDMI Loop Out, HDMI In, SDI Out, HDMI Out, Antenna Connector (RP-SMA Male), DC Port
Installation| See user manual for detailed instructions
Warranty Period| 15 days for quality problems after receiving the product, 1 year for transmitter and receiver units, 3 months for accessories and cables
Warranty Exclusions| Unauthorized maintenance, misuse, impact damage, liquid infiltration, modification, incorrect use of the product or altering the label and warranty sticker, exceeded warranty period, damage due to fire, flood, lightning, etc.
Warranty Process| Contact local dealer or Accsoon directly via email or website for support
Q&A| See user manual for troubleshooting tips

FAQS

What is the range of the ACCSOON CineEye 2S Pro Wireless Video Transmitter and Receiver?

The device has a transmission range of up to 1200 feet.

What inputs does the ACCSOON CineEye 2S Pro support

The device supports both SDI and HDMI inputs.

How many receivers can the ACCSOON CineEye 2S Pro transmit to?

The device can transmit to up to four receivers.

Does the ACCSOON CineEye 2S Pro support camera control?

Yes, the device supports camera control.

Is the ACCSOON CineEye 2S Pro firmware upgradable?

Yes, the device is firmware upgradable.

What is included in the box with the ACCSOON CineEye 2S Pro?

The box includes a transmitter, receiver, and a range of accessories such as a 1/4 screw, group knob, battery lock, camera control interface, and more.

How do I turn on/off the ACCSOON CineEye 2S Pro?

To turn on, hold the power button for 1 second. To turn off, hold the power button for 3 seconds.

How do I pair the transmitter and receiver on the ACCSOON CineEye 2S Pro?

The transmitter and receiver will pair automatically if their group knobs are in the same position (group number is the same). If you want to connect more than one receiver to the same transmitter, set all of the receiver’s group numbers to the same as the transmitter. Up to four receivers can be paired to the same transmitter.

How do I update the firmware on the ACCSOON CineEye 2S Pro?

Make sure your mobile phone has internet access, then launch “Accsoon Go” and select “CineEye 2S Pro”. Click “Firmware Update”, then the App will check if there is an update. Click “Download” button to download the firmware if there is an update available. After the firmware is downloaded, connect the CineEye 2S Pro receiver to the transmitter and then connect the mobile devices to the transmitter. Go back to the App and click “Next” to update.

What should I do if my receiver cannot connect to the transmitter?

Please make sure the transmitter and receiver have the same group setting. Please check that all antennas are tightened well.

What should I do if there is no video displayed?

Please ensure the HDMI cable is plugged into the “HDMI In” port of the transmitter. Please check if the output format of the camera is compatible with the CineEye 2S Pro input formats and check if the camera has video output enabled via the HDMI port.

What should I do if the video is choppy?

Please check if the antennas are tight. Please make sure there is no cable around the antenna. Please switch to another channel manually.

What should I do if my mobile devices can’t see the CineEye 2S Pro WiFi?

Please check if your mobile devices support 5G WiFi.

What should I do if my mobile devices can’t connect to CineEye 2S Pro?

CineEye 2 Pro has two WiFi networks available, one is 2.4G and another is 5G, the 2.4G WiFi name is “CineEye2-Pro-GroupX”, please don’t connect to this WiFi.

References

• Accsoon Wireless Video Transmitter and Receiver for Camera, Motorized Camera Slider, Wireless Follow Focus Systems- Official Site

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>