ACCSOON CoMo Wireless Intercom System User Manual
- June 1, 2024
- ACCSOON
Table of Contents
User Manual
Packaging list
Accsoon CoMo (1 host headset, 8 remote headsets) package includes:
Accsoon CoMo (1 host headset, 6 remote headsets) package includes:
Accsoon CoMo (1 host headset, 4 remote headsets) package includes:
Accsoon CoMo (1 host headset, 2 remote headsets) package includes:
Accsoon CoMo (Single headset) package includes:
Product Description
Thank you for choosing the Accsoon CoMo — A full-duplex wireless intercom
system.
Accsoon CoMo is equipped with Accsoon stability, seamlessly supporting
communication for teams of up to 9 people. With its all-new product design and
enhancements from ENC technology, the Accsoon CoMo, with no need of base
station, can provide a 400-meter (1312 ft) line of sight connection range and
over 10 hours of noisefree communication experience. The Accsoon CoMo could be
your perfect team communication solution for added convenience and better
connectivity.
Product Features
- Flip-to-mute microphone
- 10+ hours of extended battery life
- Environmental noise cancellation(ENC)
- 1312ft line of sight transmission range
- Full duplex real-time audio communication
- 1 host headset can support up to 8 remote headsets
- Industry leading wireless stability for easier real time communication
- Ergonomic headset design, compatible for both left ear and right ear wearing
- Simply power on for immediate use, rebuild connection automatically after signal loss
Instruction
Accsoon CoMo
Green badge for the host headset
Grey badge for remote headsets
First use
STEP 1
As the picture shown, open the battery slot and put in the battery.
STEP 2
Push the host and remote headsets’ power switch to “ON”, the headset will be
powered on and play “Power On” voice prompt. Indicator will show a slow green
flicker.
STEP 3
Headset connection
- Host and remote headsets are pre-paired in default. The headsets will automatically start connecting when powered on.
- The remote headsets will play “Connected” voice prompt once successfully connected to the host headset.
STEP 4
Turn on the microphone
- As the picture shown, when the microphone boom is placed at 55° , the inidicator will remain on with red light and the microphone is muted.
- To turn on the microphone, push the microphone boom forward to 55° the indicator will remain on with a green light.
- You will hear a “Toot” voice prompt, when the microphone is turned on/off.
Note:Maximum swivel angle of the boom axle is 115° .
Volume control
- Push the volume “+” or “-” button on the side of the headset to turn the volume up or down.
- The volume “+” or “-”button on the headsets can only be used for hearing volume control, not the microphone volume nor the sound effect.
- The headsets have 7-level adjustable volumes. and is initially set to level 4. The headset can remember the last setting of the volume level.
- The environmental noise cancellation (ENC) is set to be ON by default when the headset’s powered on. You can manually turn off the ENC mode by clicking the ENC switch button.
Indicator status and voice prompt
Manual Instruction | Indicator | Voice Prompt |
---|
Push the power switch to “ON”
| Disconnected: Slow green flicker Connected: Green light stays on|
Power On
Push the power switch to “OFF”| Indicator off| Power Off
Lift up the mic boom:
Mic mute on
Put down the mic boom: Mic mute off| Mute on: Red light stays on
Mute off:
Green light stays on| Toot
Connection success| Indicator stays on (light color follows microphone
status)| Connected
Connection drops| Slow green flicker| Disconnected (Remote headset only)
Pairing| Fast green flicker| Pairing
Pairing success| Indicator stays on (light color follows microphone
status)| Pairing success
Press the “ENC” Button| /| ENC On:
Noise Cancelling On
ENC Off: Noise Cancelling Off
Battery Level lower than 10%| Slow red flicker| **** Battery
Level Low
Specifications
Label | Description |
---|---|
Communication Range | 1312ft / 400m (with no barriers and interference)) |
Battery Capacity | 2320 mAh (single battery) |
**** Operating Time | Remote headset: 13 hour |
Host headset: 10 hour (4 remotes in connection) Host headset: 8 hour (8
remotes in connection)
Signal-to-noise Ratio| >65dB
Microphone Type| Electret
Communication Sampling Rate| 16KHz/16bit (8 remotes in connection)
Weight| 170g (single headset with battery)
Size| 241.8 x 231.5 x 74.8 mm (single headset)
Operating Temperature| -15~45℃
FAQ
Connection drops
- If the host headset was powered off, or the distance between host and remote headsets is too far, the remote headsets will be disconnected from the host, and the indicators on the remote headsets will turn into slow green flickers and play “Disconnected” voice prompt.
- When the remote headsets are disconnected from the host headset, you can reconnect the headsets by powering on the host headset or put the host and remote headsets back into the communication distance, the remote headsets will automatically reconnect to the host headset. Remote headsets’ indicator will stay on with green light and will play “Connected” voice prompt.
Pairing and host headset memory clearing
Pairing
- Switch the power button on both the host and remote headsets to “ON”.
- Press and hold the pairing button on the host headset for 3 seconds to enter pairing mode. The indicator will show fast green flickers, with no prompt voice.
- Press and hold the pairing button on remote headsets for 3 seconds to enter pairing mode. The remote headsets will play “Pairing” voice prompt, and the indicator will show fast green flickers.
- If the pairing succeed, remote headsets will play “Pairing success” voice prompt and the indicator will show slow green flickers.
- Please press and hold the pairing button on the host headset for 3 seconds to exit pairing.
Note: Please ensure you exit pairing mode before using Accsoon CoMo for communication.
Memeorize pairing information
- One host headset can connect and memorize 8 remote headsets at the maximum. If your host headset’s memory isn’t fully used, you can follow previous guideline to pair and add new remote headset(s).
- A single remote headset can only store pairing information of one host headset at a time. To pair it with a new host headset, please follow the instructions in previous guideline to clear the remote headset’s pairing memory and then pair it with the new host headset.
Note: If you have multiple Accsoon CoMo host and/or remote headsets,
follow previous guideline to arrange the pairing memory of each host/remote
group. Two seperate groups of Accsoon CoMo can work in the same place without
interference.
Pairing overtime
The pairing mode will last for 120s. The headsets will automatically exit
pairing mode.If host/remote headsets are unable to pair up within the time
limit, follow previous guideline to restart pairing.
Pairing memory clearing
If your host headset has already memorized 8 remote headsets, to replace the
remote headsets, please follow the steps below to clear the existing pairing
memory.
- Switch your host headset power switch to “ON”.
- Press and hold both the volume up “+” and down “-” button for 3 seconds. The host headset’s indicator will alternately flash red and green lights, indicating that the host headset has entered the memory clearing process
- Once the pairing memory is fully cleared, the host headset’s indicator will change to slow green flickers.
Note: You only need to execute the pairing memory clearing process on the host headset. After you fully cleared the memory of the host headsets, please follow previous guideline to pair up the host and remote headsets, The new pairing information will be automatically memorized after successful pairing.
Warranty
Warranty period
- If product quality related issues occur within 15 days of receiving the product, Accsoon provides complimentary maintenance or replacement.
- Under proper use and maintenance, from the date of receipt, Accsoon provides a one-year warranty on the main product (headset, battery charger) and a three-month warranty on the battery. Free maintenance service is available during the warranty period.
- Please keep the proof of purchase and the user manual.
Warranty exclusion
- Out of warranty period (If the proof of purchase is unavailable, the warranty will be calculated from the date the product is delivered from the manufacturer).
- Damage caused by use or maintenance of not following the requirements of the user manual.
- Accessories not covered by warranty (ear cushions, windscreens, headset sleeves, storage bags and containers).
- Unauthorized repair, modification or disassembly.
- Damage caused by force majeure such as fire, flood, lightning strike, etc.
After sales
- Please contact your local Accsoon authorized dealers for after-sales service. When there is no authorized dealer available in your region, you can contact Accsoon through email at support@accsoon.com or contact our customer service through our website (www.accsoon.com).
- You can get detailed solutions from authorized dealers orAccsoon.
- Accsoon reserves the right to review the damaged product.
Safety information
- When operating this equipment, read and follow all the instructions in this manual.
- Use only accessories/batteries/chargers specified or recommended by Accsoon.
- Do not expose to moisture, excessive heat or fire.
- Keep away from water and other liquids.
- Keep the equipment properly during lightning storms or when unused for long periods of time.
- Please do not use the product in a place overheating, under cooling or with lots of moisture, or nearby strong magnetic devices.
- To reduce the risk of fire or electric shock, refer servicing to qualified service personnel.
Contact Us
Facebook: Accsoon
Facebook Group: Accsoon Official User Group
Instagram: accsoontech
YouTube: ACCSOON
Email: Support@accsoon.com
Federal Communication Commission Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Operations in the 5.15-5.25GHz and 5.25-5.35GHz band are restricted to indoor
usage only.
Certificate of Quality
This product is confirmed to meet quality standards and permitted for sale
after strict inspection.
QC Inspector
Accsoon® is a trademark of Accsoon Technology Co.,Ltd.
Copyright © 2024 Accsoon All rights reserved
References
- ACCSOON成都致迅科技 – 无线图传/滑轨/无线跟焦/移动监看解决方案提供商
- ACCSOON成都致迅科技 – 无线图传/滑轨/无线跟焦/移动监看解决方案提供商
- Accsoon Wireless Video Transmitter and Receiver for Camera, Motorized Camera Slider, Wireless Follow Focus Systems- Official Site