Accsoon WIT02 Wireless Video Transmitter User Manual

Accsoon WIT02 Wireless Video Transmitter

Product Features

1. High-reliability dual-band(2.4G and 5G) transmission.
2. Transmission range up to 500 meters.
3. Very low latency(<0.06 seconds).
4. HDMI in and HDMI loop out.
5. High-quality audio transmission.
6. Support 1 transmitter to 4 receivers.
7. Camera Control supported.
8. Professional monitoring App for iOS and Android.
9. 1 .3 inch OLEO display.
10. DC and battery power supply supported.
11. Firmware updatable.

In the Box

Transmitter

1. 1/4 Screw
2. Group Knob
3. Battery Lock
4. Camera Control Interface
5. Antenna Connector (RP-SMA Male)
6. 1.3 Inch OLEO
7. Left Key
8. Right Key
9. Menu/OK Key
10. Power Button
11. HDMI Loop Out
12. HDMI In
13. DC Port

Receiver

1. 1 /4 Screw
2. Group Knob
3. Battery Lock
4. EXI-IF
5. Antenna Connector (RP-SMA Male)
6. 1.3 Inch OLEO
7. Left Key
8. Right Key
9. Menu/OK Key
10. Power Button
11. HDMI Out
12. DC Port

Typical Application

Diagram 1

Diagram 2

Diagram 3

Install Instructions

1. Install the antennas as demonstrated.
2. Use the hot shoe mount adapter to install the CineEye 2 Pro onto the camera or camera cage.
3. Use an NP-F970/F750/F550 battery or DC source to power the CineEye 2 Pro.
4. Connect camera HDMI output to transmitter HDMI input port.
5. Connect the receiver to the monitor(not included in this product).

Operation Instructions

Turn On/Off

Group Settings

1. CineEye 2 Pro uses a group knob to pair the transmitter and receiver, both the transmitter and the receiver have a group knob on the side. The transmitter and receiver will pair automatically if their group knob at the same position, otherwise they will not pair and can’t communicate.
2. If users want to connect more than one receiver to the same transmitter, just need to set all the receiver’s groups to the same as the transmitter.
3. If two or more groups are used at the same time, please make sure different groups must have different group settings.

Note: If the group setting changes, please pair the transmitter and receiver in short-range, or the pair may fail. If the group setting changes after power on, the change will take effect after reboot.

OLED Display

1. Input video info
2. Input audio info
3. Current group setting
4. Battery level/DC input
5. Connection status
6. Current 5G WiFi channel

Connection Status:

1. Transmitter: The connection status indicates how many devices are connected if no devices are connected there will display “O”.
2. Receiver: The connection status will display “1” if the receiver is connected to a transmitter, or will display “O”.

Data Rate Setting

1. High Quality Mode
2. Balance Mode (Default setting)
3. Speed Mode

Setting steps:
Click the “Menu” button to enter “Data Rate Setting” -> choose a data rate mode->click the “Menu” button to take effect.

Channel Setting

1. Only the transmitter has a “Channel Setting” menu.
2. The default setting is “Auto” which means the transmitter will select a channel with less interference automatically after power on.
3. If users want to select a channel manually, please follow the below steps: Click the “Menu” button to enter the “Channel Setting” menu-> choose a channel->click the “Menu” button to confirm-> Choose ‘Yes” ->Click “Menu” button to reboot the transmitter and the setting will take effect.

Network Reset

Only the transmitter has a “Network Reset” menu. Users can reset the WiFi SSID and password to factory settings by the “Network Reset” menu.

Setting steps:
Click the “Menu” button to enter the “Network Reset” menu-> choose ‘Yes”->click the “Menu” button to confirm->Choosing “Yes” ->Click the “Menu” button to reboot, the SSID and password of the 5G WiFi will be reset to factory settings.

App Monitoring

App download
Please download the App (Accsoon Go) from Google Play or the App Store.

Connect the App to the CineEye 2 Pro transmitter
Launch the Accsoon Go and then select “CineEye 2 Pro”, open the WLAN settings page of the mobile devices, then choose the CineEye 2 Pro WiFi and connect to it, the name of the CineEye 2 Pro WiFi is “CineEye2Pro_XXXX and the default password is “12345678”.

Monitoring
Back to the Accsoon Go connecting page, click “Monitor” to enter the monitoring page and you would be able to monitor the video shot on the camera. CineEye2Pro.

Note: CineEye 2 Pro have two WiFi signal, one is 2.4G and another one is 5G, the 2.4G WiFi name is “CineEye2-Pro-GroupX”, please don’t connect to this WiFi.

Firmware Update

Firmware download
Make sure your mobile phone can access the internet, then launch ‘Accsoon Go” and select “CineEye 2 Pro”, Click “Firmware Update”, then the App will check if there is an update, the App will download the latest firmware automatically if there is an update.

Update
After the firmware is downloaded, connect the CineEye 2 Pro receiver to the transmitter and connect the mobile devices to the transmitter too. Go back to the App and click the “Firmware Update” to update.

1. Make sure the battery level of the CineEye 2 Pro should be above 50%.
2. Don’t tum off the CineEye 2 Pro before the update finish.

Specification

Transmitter

| ****

Receiver

---|---
Video Input| HDMI| None
Video Output| HDMI| HDMI
 | ****

1080p 23.98/24/25/29.97/30/50/59 .94/60fps

|
 | 1080i 50/59.94/60fps|
Video Input Format| 720p 50/59.94/60fps|
 | 480p 59.94/60fps|
Audio| 44.1KHz/48KHz 16bit/24bit PCM|
Antenna Connector| 4 RP – SMA Male|
Latency| <0.06 seconds(Camera latency not included)|

OLEO

| ****

1 .3 inch OLEO

|
Transmission Power| 17~20dBm|
Transmission Range| 500 meters(no obstacle, no interference)|
Camera Control| Yse| None
Power Consumption| 4 Watt (Typica l)| 3.5 Watt (Typical)
APP| iOS8.0 or above/ Android 7.0 or above|
Operating Temperature| – 1 0~40°C|
Dimensions| 1 25mmx 77mmx31 mm(Antenna not included)|
Weight| 225g(Antenna not included)|

Warranty

Warranty Period

1. If there is any quality problem happening to our products within 15 days after you received them, we will be responsible for giving free maintenance or replacement for free.
2. The warranty time is one year. Within the warranty period, if under the usage of the instruction sheet, for any product problem, we will offer repair service for free(the accessories and cables warranty time are 3 months).

Warranty Service Won’t be given under the following circumstance

1. Unauthorized maintenance, misusage, collision, liquid infiltration, modification.
2. Incorrect use of the product, tearing up or altering label and warranty sticker.
3. It has already exceeded the period of warranty.
4. Damage due to fire, flood disaster, light stroke, and alike.

The process to get warranty service

Customers shall contact the local dealer to solve their problem. If there is none, please contact us through our E-mail (support@accsoon.com) or our website (www.accsoon.com). You will get detailed information from them, we reserve the ultimate right to review the damaged products.

Q&A

Receive can’t connect to Transmitter

1. Please make sure the transmitter and receiver have the same group setting.
2. Please check if the antenna tightens well.

No video displayed

1. Please check if the HDMI cable is plugged into the “HDMI In” port of the transmitter.
2. Please check if the output format of the camera is compatible with the CineEye 2 Pro or check if the camera has output the video via the HDMI port.

Video is choppy

1. Please check if the antenna tightens well.
2. Please make sure there is no cable around the antenna.
3. Please switch to another channel manually.

Mobile devices can’t connect to CineEye 2 Pro
CineEye 2 Pro has two WiFi, one is 2.4G and another one is 5G, the 2.4G WiFi name is “CineEye2-Pro-GroupX”, please don’t connect to this WiFi.

FCC STATEMENT CAUTION

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. (1) This device may not cause harmful interference, and
   (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>