ACCSOON CineEye II Pro Wireless Video Trasmitter and Receiver User Manual
- June 6, 2024
- ACCSOON
Table of Contents
Cindy II Pro
User Manual
Product Features
High-reliability dual-band (2.4G and 5G) transmission
Transmission range of up to 1200 feet
Very low latency (<0.06 seconds)
HDMI in and HDMI loop out
High-quality audio transmission
Supports transmission to up to 4 receivers
Camera Control supported
Professional monitoring App for iOS and Android
1.3 inch OLED display
DC and battery power supply supported
Firmware upgradable
In the Box
Cindy 2 Pro
① 1/4 Screw ② Group Knob ③ Battery Lock ④ Camera Control Interface
⑤ 1.3 Inch OLED ⑥ Left Key
⑦ Right Key
⑧ Menu/OK Key
⑨ Power Button ⑩ HDMI Loop Out ⑪ HDMI In
⑫ DC Port
⑬ Antenna Connector (RP-SMA Male)
① 1/4 Screw ② Group Knob ③ Battery Lock
⑥ Left Key
④ EXI-IF
⑤ 1.3 Inch OLED
⑦ Right Key
⑧ Menu/OK Key
⑨ Power Button ⑩ HDMI Out
⑪ DC Port
⑫ Antenna Connector (RP-SMA Male)
Typical Application
Operation Instructions
Install Instructions
- Install the antennas as demonstrated.
- Use the hot/cold shoe mount adapter to install the CineEye 2 Pro onto the camera or camera cage.
- Use an NP-F970/F750/F550 battery or DC source to power the CineEye 2 Pro.
- Connect camera output via HDMI to transmitter HDMI input port.
- Connect the receiver to the monitor (monitor not included in this product).
Turn On/Off
Group Settings
- Cindy 2 Pro uses a group knob to pair the transmitter and receiver, both the transmitter and the receiver have a group knob on the side. The transmitter and receiver will pair automatically if their group knobs are in the same position (group number is the same), otherwise, they will not pair and cannot communicate.
- If users want to connect more than one receiver to the same transmitter, set all of the receiver’s group numbers to the same as the transmitter. Up to four receivers can be paired to the same transmitter.
- If multiple CineEye 2 Pro units are being used in the same area， each transmitter and receiver pairings need to have a different group number.
Note: If the group setting has changed, please bring the transmitter and receiver in close range, or the pairing may fail. If the group setting has changed after power on, the change will take effect after reboot.
OLED Display
① Input video info
② Input audio info
③ Current group setting
④ Battery level/DC input
⑤ Connection status
⑥ Current 5G WiFi channel
Connection Status：
Transmitter: The connection status indicates how many devices are connected,
if no devices are connected the unit will display “0”.
Receiver: The connection status will display “1” if the receiver is connected
to a transmitter, or will display “0”.
Data Rate Setting
① High-Quality Mode
② Normal Mode (Default setting)
③ Speed Mode
Setting steps:
Click the “Menu” button to enter “Data Rate Setting”->choosing a data rate
mode->click “Menu” button to take effect.
Channel Setting
- Only the transmitter has the “Channel Setting” menu.
- The default setting is “Auto” which means the transmitter will select a channel with the least interference automatically after power on.
- If users want to select a channel manually, please follow the below steps: Click “Menu” button to enter the “Channel Setting” menu->choosing a channel->click “Menu” button to confirm-> Choosing “Yes” ->Click the “Menu” button to reboot the transmitter and the setting will take effect.
Network Reset
Only the transmitter has the “Network Reset” menu. Users can reset the WiFi SSID and password to factory settings by the “Network Reset” menu.
Setting steps：
Click the “Menu” button to enter the “Network Reset” menu->choosing
“Yes”->click the “Menu” button to confirm->Choosing “Yes” ->Click “Menu” button
to reboot, the SSID and password of the 5G WiFi will be reset to factory
settings.
App Monitoring
App download
Please download the App (Accsoon Go) from the Google Play or iOS App Store.
2. Connect the App to the CineEye 2 Pro transmitter
Launch the “Accsoon Go” app and then select “CineEye 2 Pro”, open the WLAN
(Wireless/WiFi) settings page of the mobile devices, then choose the CineEye 2
Pro WiFi and connect to it. The name of the CineEye 2 Pro WiFi is
“CineEye2Pro_XXXX” and the default password is “12345678”.
3. Monitoring
Return to Accsoon Go and ensure CineEye 2 Pro is selected, click “Monitor” to
enter the monitoring page and you will be able to monitor the live feed of the
camera.
Note: CineEye 2 Pro has two WiFi signals, one is 2.4G and another is 5G, the 2.4G WiFi name is “CineEye2-Pro-GroupX”, please don’t connect to this WiFi.
Firmware Update
1. Firmware download
Make sure your mobile phone has internet access, then launch “Accsoon Go” and
select “CineEye 2 Pro”, Click “Firmware Update”, then the App will check if
there is an update. Click the “Download” button to download the firmware if
there is an update available.
2. Update
After the firmware is downloaded, connect the CineEye 2 Pro receiver to the
transmitter and then connect the mobile devices to the transmitter. Go back to
the App and click “Next” to update.
1. The battery level of the CineEye 2 Pro should be above 50% before
updating.
2. Don’t turn off the CineEye 2 Pro before the updates are complete.
Specification
Warranty Period
- If there is a quality problem that occurs within 15 days after receiving the product, we will provide complimentary maintenance or replacement.
- The warranty period for transmitter and receiver units is one year. Within the warranty period, if under the usage of instruction manual for any product problem Accsoon will offer repair service for free.
- The accessories and cables warranty period are 3 months.
Warranty Exclusions
- Unauthorized maintenance, misuse, impact damage, liquid infiltration, or modification.
- Incorrect use of the product or altering the label and warranty sticker.
- The warranty period has been exceeded.
- Damage due to fire, flood, lightning, etc.
Warranty Process
Customers shall contact the local dealer to solve their problem. If there is no local dealer available, please contact Accsoon directly via email (support@accsoon.com) or our website (www.accsoon.com). You will get detailed information, and Accsoon reserves the right to review the damaged products.
The receiver cannot connect to the transmitter
- Please make sure the transmitter and receiver have the same group setting.
- Please check that all antennas are tightened well.
No video displayed
- Please ensure the HDMI cable is plugged into the “HDMI In” port of the transmitter
- Please check if the output format of the camera is compatible with the CineEye 2 Pro input formats and check if the camera has video output enabled via the HDMI port.
Video is choppy
- Please check if the antennas are tight.
- Please make sure there is no cable around the antenna.
- Please switch to another channel manually.
Mobile devices can’t see the CineEye 2 Pro WiFi
1. Please check if your mobile devices support 5G WiFi.
Mobile devices can’t connect to CineEye 2 Pro
1.CineEye 2 Pro has two WiFi networks available, one is 2.4G and another is 5G, the 2.4G WiFi name is “CineEye2-Pro-GroupX”, please don’t connect to this WiFi.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Contact Us
| Website | Youtube | |
|---|---|---|
| http://www.accsoon.com | ||
| http://www.accsoon.com |
https://www.youtube.com/channel/UC2qKRcJgak8rcqt9IyeSD5g
For more details about the product please visit
www.accsoon.com
This document is subject to change without notice.
Accession is a trademark of Accsoon Technology Co., Ltd.
Copyright 2020 Accsoon. All rights reserved
https://www.facebook.com/accsoon/?ref=bookmarks
Website:www.accsoon.com E-mail:support@accsoon.com Chengdu Accsoon Technology Co., Ltd
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>