soundcore Rave Neo 2 SE Bluetooth Speaker User Manual
- June 17, 2024
- Soundcore
Table of Contents
soundcore Rave Neo 2 SE Bluetooth Speaker
Product Information
Specifications:
- Product Name: Soundcore Rave Neo 2 SE
- Connectivity: Bluetooth, USB-C, USB-A, AUX
- Features: Light mode, BassUp, PartyCast
- Charging: USB-C (0.6m/1.9ft)
Product Usage Instructions
Charging:
To charge your Soundcore Rave Neo 2 SE speaker, use the provided USB-C cable.
Ensure the speaker is fully charged before first use to maximize battery
lifespan.
Power On/Off:
To power on the speaker, press the Power button (3) until the LED indicator
lights up. To power off, press and hold the Power button again.
Bluetooth Pairing:
Activate Bluetooth on your device and search for “Soundcore Rave Neo 2 SE” in
the available devices list. Select the speaker to pair and connect.
Volume Control:
Adjust the volume by pressing the Volume Up (8) and Volume Down (6) buttons on
the speaker.
Play/Pause:
To play or pause music, press the Play/Pause button (7) on the speaker.
PartyCast Feature:
Enable PartyCast mode by pressing the PartyCast button (5) to sync multiple
Soundcore speakers for a synchronized audio experience.
FAQ
Q: How do I reset the Soundcore Rave Neo 2 SE speaker?
A: To reset the speaker, press and hold the Power button and Volume Up
button simultaneously for 5 seconds until the LED indicators flash.
At a Glance
- Light mode
- BassUp
- Power
- Bluetooth
- PartyCast
- Volume down
- Play/Pause
- Volume up
- USB-C for charging in
- USB-A for USB playback and charging out
- AUX
Charging
Charge your Speakers
Fully charge this speaker before the first use to prolong the lifespan of the
built-in battery.
Check Battery Level
Charge your USB Devices
Charge your USB devices through the USB port.
Powering On/Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
- This speaker can pair with 2 mobile devices via Bluetooth. To pair with another Bluetooth device, press the Bluetooth button once to re-enter Bluetooth pairing mode.
- This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
- Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
PartyCast Mode
You can wirelessly connect up to 100 identical Rave Neo 2 SE speakers
together.
- Connect a Rave Neo 2 SE speaker with your smartphone or tablet as Speaker 1.
- Press the PartyCast button once on Speaker 1 and all the additional speakers to enter the pairing mode. When successfully connected, you will hear a prompt sound.
- PartyCast 2.0 technology can sync up stereo sound and is compatible with PartyCast 1.0. Any Rave Neo 2 SE speaker can connect with a speaker supporting PartyCast 1.0.
- To exit the PartyCast mode, press the PartyCast button once on any Rave Neo 2 SE speaker.
AUX/USB Mode
Plug in a 3.5 mm audio cable or insert a USB storage device.
When using AUX mode, control audio playback via the connected device.
Button Controls
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.
Light Effects
Download the Soundcore app to check all available light modes.
- Campfire Vibes
- Neon Night
- Spring Break
- Euphoric Dance
- Romantic Stroll
- Flow
- Party
Soundcore App
Download the Soundcore app to enhance your experience.
- Product information: Check the product name and software version, or read the user manual.
- Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.
- Battery status: Indicates the remaining battery level of your speaker.
- Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
- EQ settings: There are 6 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
- Soundcore Signature: Normal EQ mode with well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Treble Boost: High frequencies are enhanced.
- Balance: No enhancement for high-frequency and low-frequency sounds.
- Custom: Customize the EQ setting to suit you in the app.
- BassUp: Turn on BassUp to enhance the low-frequency sound.
- Set auto-power off time: Set an auto-power off time (5/10/20/60 minutes, 20 minutes by default), the speaker will automatically power off when the time is up.
- Voice prompt: Mute or restore the voice prompt while powering on/off.
Specifications
Specifications are subject to change without notice.
| DC power input | 5 V __ 3 A |
|---|---|
| Battery capacity | 4900 mAh/7.2 V |
| USB output | 5 V __ 2.1 A |
| Audio output power | 80 W |
| Charging time | 5.5 hours |
| Playtime (varies by volume level and music content) | Up to 18 hours |
| Waterproof level | IPX7 |
| Bluetooth version | 5.3 |
| Bluetooth range | 100 m |
| USB audio format | .mp3 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>