MOTO SP

MODELS: MOTO SP110, Verve Rap 105
Frequency Band: 2.402–2.480GHz
Maximum RF power: 4dBm
Working temperature: 0oC–45o

Product ID : MOTO SP110
FCC ID: 2ARRB-VR105
IC : 20353-VR105

Quick Start Guide

Pairing:

• Hold > for 4 seconds.
• Select “Verve Rap 105/108” from the phone Bluetooth menu.

Button Operation:

Additional Operation

Call|
Reject a call| Long Press – / +
Receive incoming call and end ongoing call| Triple press MFB
Receive incoming and on hold ongoing call| Press MFB
Mute during call| Press – and +
LED Indicator|
Pairing| Red-blue flash
Standby| Blue flash
Charging| Red steady
Fully charged| Blue steady
Battery low| Red flash

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may
cause undesired operation.

IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:

(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.

The term “IC: “ before the certification/registration number only signifies that the
Industry Canada technical specifications were met. This product meets the applicable
Industry Canada technical specifications.

LED Indicator|
---|---
Pairing| Rood
Standby| Blauw knipperend
Opladen| Rood constant
Opladen voltooid| Blauw constant
Batterij laag| Rood knipperend

Charging:

Fully charge before use The device can be powered through a micro USB from any
CE compliant power source that implement the European interface as requested by EN 301 489-52.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>