ergotron 98-543-251 Lockable CPU Wall Cabinet User Guide

June 4, 2024
ERGOTRON

ergotron 98-543-251 Lockable CPU Wall Cabinet

WHAT  IS IN THE BOX

ergotron 98-543-251 Lockable CPU Wall Cabinet
1

TOOLS NEEDED

ergotron 98-543-251 Lockable CPU Wall Cabinet 2

There are 4 wall types to mount to, gather only the tools for your wall type.

  1. WOOD
  2. METAL STUD
  3. CONCRETE
  4. HOLLOW WALLergotron 98-543-251 Lockable CPU Wall Cabinet 3

Recommended

Weight Capacityergotron 98-543-251 Lockable CPU Wall Cabinet
5

CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!

WARNING:

  • Ensure that the wall structure is capable of supporting four times the total weight of mounted equipment. Mounting to wall surfaces that do not meet this criteria may result in an unstable, unsafe condition which could lead to personal injury and/or property damage.
  • Consult a construction professional if you yOu have any doubt about what this means in regard to your particular application. For OSPHD or other local certifications, please reference local regulations for required install structures.
  •  Mounting holes must be drilled at least 1/4″ (6mm) deeper than your concrete Screw and must be located within solid concrete, not mortar or covering material. If you drill into an area of concrete that is not solid, reposition mounting holes until both anchors can be Tully inserted into Solid concrete!
  •  Anchors that are not fully set in solid concrete will not support the applied load resulting in an unstable, unsafe condition which could lead to personal injury and/or property damage. Consult a construction professional it you have any doubt about what this means in regard to your particular situation.

IMPORTANT  INSTRUCTION

  • Determine mounting location ****
  • CareFit Combo System
    • When attaching to the CareFit” Combo System, mounting method needs to be the same as the CareFit” Combo System.ergotron 98-543-251 Lockable CPU Wall Cabinet 7
  • Open cabinetergotron 98-543-251 Lockable CPU Wall Cabinet 8
  • Mounting Option:
    • Wall Mounting
  • For use with CareFit” Combo System or Wall Trackergotron 98-543-251 Lockable CPU Wall Cabinet 10
  • For CareFit Combo System, determine location above or belowergotron 98-543-251 Lockable CPU Wall Cabinet 11
  • Mark Wallergotron 98-543-251 Lockable CPU Wall Cabinet 12ergotron 98-543-251 Lockable CPU Wall Cabinet 13
  • Drill Wall
    • WOOD
    • METAL STUD
    • CONCRETE
    • HOLLOW WALLergotron 98-543-251 Lockable CPU Wall Cabinet 14

Use the corect drill size for your customer-supplied fasteners. Drill 1/4″ (6 mm) deeper than screw length.

  • Center holes to studergotron 98-543-251 Lockable CPU Wall Cabinet 15
  • Center holes to stud

For Recommended Screwergotron 98-543-251 Lockable CPU Wall Cabinet
17

Attach anchors

  • WOOD
  • METAL STUD
  • CONCRETE
  • HOLLOW WALLergotron 98-543-251 Lockable CPU Wall Cabinet 18

Attach anchors if required for your Customer supplied fasteners.ergotron 98-543-251 Lockable CPU Wall Cabinet
19 ergotron 98-543-251 Lockable CPU Wall
Cabinet 20

Attach to wall

  • WOOD
  • METAL STUD
  • CONCRETE
  • HOLLOW WALLergotron 98-543-251 Lockable CPU Wall Cabinet 21

Recommended

Secure to wall

  • WOOD
  • METAL STUD
  • CONCRETE
  • HOLLOW WALLergotron 98-543-251 Lockable CPU Wall Cabinet 25

CAUTION

Make sure the wall mount bracket is level, flush and snug to the wall surface.ergotron 98-543-251 Lockable CPU Wall Cabinet
27 ergotron 98-543-251 Lockable CPU Wall
Cabinet 28 ergotron 98-543-251 Lockable CPU Wall Cabinet 29ergotron 98-543-251 Lockable CPU Wall Cabinet
30

Place cover above or below ergotron 98-543-251 Lockable CPU Wall Cabinet
31

NOTE: When contacting customer service, reference the serial number.

Installation Guide

Ergotron

2021 Ergotron, Inc. All rights reserved. CareFit” is a registered trademark of Ergotron, Inc. While Ergotron, Inc. makes every effort to provide accurate and complete information on the installation and use of its products, it will not be held liable for any editorial errors or omissions (including those made in the process of translation from English to another language), or tor incidental, special or consequential damages of any nature resulting from furnishing this instruction and pertormance of equipment in connection with this instruction. Ergotron, Inc. reserves the right to make changes in the product design and/or product documentation without notification to its users. For the most current product information, or to know if this document is available in languages other than those herein, please contact Ergotron. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of Ergotron, Inc,1181 Trapp Road, Eagan, Minnesota, 55121, USA Patents Pending and Patented U.S.& Foreign. Ergotron is a registered trademark of Ergotron, Inc.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals