ergotron SV42-6302-1 LCD Pivot StyleView Medical Cart User Guide

June 3, 2024
ERGOTRON

ergotron SV42-6302-1 LCD Pivot StyleView Medical Cart

RANGE OF MOTION

| CAUTION! Completely release brake engagement before raising or lowering the cart. Raising or lowering the cart with the brake partially engaged may cause product damage.
---|---

ERGONOMICS

Working customize – to your size

  1. Set top of monitor screen about one inch below eye level – Release brake and lift or lower riser as needed.
  2. Tilt screen for comfortable viewing and to reduce eye and neck strain.
  3. Pull keyboard tray forward and position mouse tray and mouse pouch on right or left, as needed.
  4. Work with elbows bent at about 90° to minimize muscle strain.
  5. If the riser moves up and down with diffi culty, or if it drifts out of set position, consult the product manual for adjustment information.
  6. Stay in charge! Powered carts should be plugged into outlet as often as possible to keep battery chargedand computer running

Moving stow – before you go

  1. During normal movement, release brake and lower worksurface to lowest position for optimal stability and unobstructed view.
  2. Tuck away open trays and return mouse, scanner and other accessories to their places.
  3. Unlock both front casters.
  4. Push cart from rear with elbows bent at about 90° to maximize control and minimize muscle strain.
  5. Don’t run out! Before moving, make sure cord is unplugged from outlet and hooked to basket for safe travel. Remember, charge battery fully 100% every day

KEYBOARD LIGHT

Your computer must be on for this light to function. Keyboard Light will automatically turn off after 15 minutes if not manually turned off .

This power system interface will alert you to the percentage of charge remaining in the cart battery with a series of steady or fl ashing red, yellow or green lights, and an alarm that will beep when charge gets below 10%. Remember, the battery needs to be charged to 100% every day, and you can use the cart while charging, so plug-in cord as often as possible to avoid running out of power!
NOTE: Put monitor in power save mode to optimize battery run time.

If other lights are fl ashing red/green it could indicate a power system fault. If this occurs contact Ergotron Customer Care.
NOTE: Frequent operation of the cart while battery charge levels are below 10% may reduce the life of your battery.

www.ergotron.com
USA: 1-800-888-8458
Europe: +31 (0)33-45 45 600
China: 400-120-3051
Japan: japansupport@ergotron.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals