HUGHES AUTOFORMERS PWD30 30 AMP Bluetooth Surge Protector User Guide

June 6, 2024
HUGHES AUTOFORMERS

Bluetooth Surge Protector
User Guide

  1. Download the app on your mobile device (App Store or Google Play) by searching Power Watchdog or Scanning below QR Code.https://itunes.apple.com/na/app/POWER-WATCHDOG/id1336375006?mt=8
    https://play.google.com/store/apps/details?id=com.radinet.ble_app

  2. Power and check the LED’s. Make sure all three top LEDs are Green, otherwise you have a power line issue. Talk to your Park Manager.

  3. Open the app (make sure your Bluetooth is ON) and tap on +. Tap on “Allow”, so the app can use your camera to Scan the Barcode.

  4. Scan the QR code on the side of the product to sync the app and your product.

  5. Add a name for the product and set the values to get notified. Tap on OK to save.

  6. Tap on and select your device name. Tap on “Connect”.

  7. Your device is set and by tapping on you can monitor your Power.

I’m watching it!!

Documents / Resources

| HUGHES AUTOFORMERS PWD30 30 AMP Bluetooth Surge Protector [pdf] User Guide
PWD30, 30 AMP Bluetooth Surge Protector
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals