rugged RRP364-BT 4 Person Ecpandable Bluetooth Inetrcom Radio User Manual
- June 6, 2024
- Rugged
Table of Contents
RRP364-BT
USER MANUAL
- DRIVER PTT Used by the driver for transmitting over 2-Way Radio.
- VOLUME Controls volume and power for in-car audio. 2-way radio and music audio are controlled by individual sources.
- LED Green indicates power is on. Red indicates transmitting.
- BLUETOOTH Pairing mode is active when power is on.
- PASSENGER PTT Used by the passenger for transmitting over 2-Way Radio.
Intercom Operation
POWER ON/OFF the intercom by rotating the volume knob
clockwise/counterclockwise.
MUSIC/AUDIO input via Bluetooth connection.
Start with the intercom powered off and the Bluetooth function of your phone or device powered off.
- Turn on the intercom.
- Turn on the phone or device’s Bluetooth.
- Wait for “RRP364” to be displayed on the device.
- Select “RRP364” and wait for the device to pair to the intercom.
- If pairing is not successful, restart the process.
2-Way Radio Use
Received audio is controlled by your radio’s volume control, not the intercom volume control. The Push-To-Talk (PTT) Button is used for transmitting over a 2-way radio connected to your intercom. To transmit, press and hold the PTT button, speak, and release when finished.
Pro Tip:
– When transmitting, the LED on both the intercom and radio will illuminate
red.
INSTALLATION GUIDE
This is a universal wiring diagram. Your exact configuration might vary depending on the system purchased.
HEADSET connects driver and co-driver headsets to the intercom. Route
away from power and antenna cables.
CREW HEADSETS connect rear-seat passengers.
RADIO connects to optional radio.
POWER connects +/- directly to 12v battery.
Radio & Intercom Mounting
- Both the intercom and radio come with universal mounting brackets. Vehicle specific mounting options are sold separately.
- DO NOT mount the radio or intercom near an ignition box to avoid RF interference.
- Route antenna cable away from power leads.
Connect Power
- Route all power cables directly to the battery.
- DO NOT connect inline with other components. If power is tied to ignition, lights or other power sources, a ground loop problem may occur, causing noise in the system.
- DO NOT remove any fuses that are in line with factory cables or otherwise modify power cables.
Rugged Radios
|www.ruggedradios.com
888-541-7223
Documents / Resources
|
rugged RRP364-BT 4 Person Ecpandable Bluetooth Inetrcom
Radio
[pdf] User Manual
RRP364-BT, 4 Person Ecpandable Bluetooth Inetrcom Radio
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>