ELRO CBFS25 Smoke Alarm with Magnet Instruction Manual
- June 6, 2024
- ELRO
Table of Contents
CBFS25
Instruction Manual
SMOKE ALARM
With magnet
XXXX
DoP: XXXXXX-01
XX XXXXXX
Fire Safety 14604:2005 + AC:2008
Firstly
Follow instructions ensure proper install tented use: Fire detect warning for
household or similar resident applicable regular consulted.
INTENDED USE: FIRE SAFETY
ESSENTIAL CHARACTERISTICS: PASSED
Nominal candy, Response delay (response erformance under fire condition
reliability – Tolerance to supply voltage – Durability of operational
reliability and response delay, temperature resistance, Vibra resistance,
humidity resistance, corrosion resistance, electrical stability.
Guarantee www.elro.com
Manufacturer:
Sitwell Electronics CO., Limited
No.666 Qingfeng Road, Jiangbei District,
Ningbo, Zhejiang Province, China 315034
Importer
ELRO Europe | www.elro.eu
Postbus 9607 – Box E800
1006 GC Amsterdam The Netherlands
Activate before use!
Press and hold test buon units up, then release immediately.
Overview LED & acoustic signaling
Operating mode | LED signal (flash) | Acoustic signal (beep) | Description mode |
---|---|---|---|
Normal | I x per 40 seconds | None | Device is functioning properly |
Test | I x per second (3 x), pause of 1,5 seconds | I x per seconds (3 x), pause | |
of 1,5 seconds | Device is being tested | ||
Alarm | I x per second (3 x), pause of 1,5 seconds | I x per seconds (3 x), | |
pause of 1,5 seconds | Device has detected smoke | ||
Alarm silence | 1 x per 8 seconds | None | Alarm signal is muted |
Low battery | 1 x per 40 seconds(simultaneously with beep) | I x per 40 seconds | |
(simultaneously with flash) | Battery is running low | ||
Low battery warning silence | None | None | Low battery warning is muted |
Fault warning | 1 x per 40 seconds(alternating with beep)” | 1 x per 40 seconds | |
(alternating with flash)” | Device is not functioning properly |
Symbols
Recycling and disposal: The WEEE symbol means that this product and batteries
must be disposed of separately from other household waste. When it reaches its
end of life, take it to a designated waste collection in your area to
guarantee safe disposal or recycling. Protect the environment, human health
and natural resources!
Read the manual before use and store it in a safe place for future use and
maintenance.
Download Declaration Performance (DoP) at www.elro.eu.
Warnings
- To prevent injury, this apparatus must be securely attached to the ceiling in accordance with the installation instructions.
- Batteries shall not be exposed to excessive heat such as sunshine and fire.
- Battery lifetime shortens without monthly test.
- Keep away from air conditioning/ventilation.
- Do not paint or cover the device.
- Consult local regulations.
Troubleshooting
A false alarm is often caused by dust or steam. In case of doubt: Leave the building and take action! Additional mounting instructions: Corridor max width 3m: Max 15m between 2 alarms. Max. 7,5m to front side and alarms at edges/crossings of corridors. Galleries: Length and width >2m and >16m2, additional alarms below gallery. Partial roof slopes: Flat ceiling 51m wide, consider as roof slope. Flat ceiling >lm wide, consider asflat ceiling.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>