levoit LAP-C601S-WUS VeSync Core 600S Smart True HEPA Air Purifier User Manual
- June 6, 2024
- Levoit
Table of Contents
- Package Contents
- Specifications
- READ AND SAVE THESE INSTRUCTIONS SAFETY INFORMATION
- GETTING TO KNOW YOUR SMART AIR PURIFIER
- CONTROLS & DISPLAY
- GETTING STARTED
- USING YOUR SMART AIR PURIFIER
- ABOUT THE FILTER
- CARE & MAINTENANCE
- TROUBLESHOOTING
- VESYNC APP TROUBLESHOOTING
- FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
- FCC RADIATION EXPOSURE STATEMENT
- WARRANTY INFORMATION
- CUSTOMER SUPPORT
- ATTRIBUTIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
USER MANUAL
Levoit VeSync Core™ 600S
Smart True HEPA Air Purifier
Product Series: Core 600S
Model: LAP-C601S-WUS
Questions or Concerns?
Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT
at support@levoit.com or at
888-726-8520.
Package Contents
1 × Smart Air Purifier
1 × True HEPA 3-Stage Original Filter (Pre-Installed)
1 × User Manual
1 × Quick Start Guide
Specifications
Power Supply | AC 120V, 60Hz |
---|---|
Rated Power | 49W |
Ideal Room Size | 635 ft2 / 59 m2 |
•This Ideal Room Size is based on 5 air changes per hour (ACH).
1588 ft2 /147 m2
•This Ideal Room Size is based on 2 air changes per hour (ACH).
Note: Effective for
larger rooms but purification will take longer.
CADR (CFM)| 410 CFM / 697 m3/h
Operating Conditions| Temperature: 14-104°F / -10-40°C
Humidity: < 85% RH
Noise Level| 26-55dB
Dimensions| 12.3 x 12.3 x 23.6 in / 31.3 x 31.3 x 60 cm
Weight| 13.7 lb / 6.2 kg
Note: To access additional smart functions, download the free VeSync app (see page 8).
READ AND SAVE THESE INSTRUCTIONS SAFETY INFORMATION
To reduce the risk of fire, electric shock, or another injury, follow all instructions and safety guidelines.
General Safety
- Only use your air purifier as described in this manual.
- Do not use without removing the plastic wrap from the filter. The air purifier will not filter air, and may overheat, causing a fire hazard.
- Do not use the air purifier outdoors.
- Keep the air purifier away from water, and wet or damp areas. Never place in water or liquid.
- Do not use in excessively humid areas.
- Keep the air purifier away from heat sources.
- Do not use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
- Keep 5 ft / 1.5 m away from where oxygen is being administered.
- Supervise children when they are near the air purifier. Do not allow children to play with the air purifier.
- Do not place anything into any opening in the air purifier.
- Do not sit on or place heavy objects on the air purifier.
- Keep the inside of the air purifier dry. To prevent moisture buildup, avoid placing in rooms with major temperature changes or underneath air conditioners.
- Always unplug the air purifier before servicing (such as changing the filter).
- Do not use the air purifier if it is damaged or not working correctly, or if the cord or plug is damaged. Do not try to repair it yourself. Contact Customer Support (see page 23).
- WARNING: To reduce the risk of fire or electric shock, do not use this air purifier with any solid-state speed controls (such as a dimmer switch).
- Children should not clean or perform maintenance on the air purifier without supervision.
- This air purifier is not to be used by persons (including children) with reduced physical, sensory, or mental capacities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Not for commercial use. Household use only.
Power & Cord
- Keep the air purifier near the outlet it is plugged into.
- Never place the cord near any heat source.
- Do not cover the cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.
- Keep the cord out of areas where people walk often. Place the cord where it will not be tripped over.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- This air purifier uses standard North American 120V, 60Hz outlets. If using outside the US or Canada, check for compatibility.
- If the power supply cord is damaged, it must be replaced by Arovast Corporation or similarly qualified persons in order to avoid an electric or fire hazard. Please contact Customer Support (see page 23).
Electromagnetic Fields (EMF)
Your Levoit air purifier complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.
GETTING TO KNOW YOUR SMART AIR PURIFIER
A. Fan Speed Indicators
B. Fan Speed Button
C. Sleep Mode Button
D. Air Quality Indicator Rings
E. Check Filter Indicator Reset Button
F. Light Sensor
G. Timer Button
H. On/Off Button
I. Check Filter Indicator
J. Wi-Fi® Indicator
K. Auto Mode Button| L. Display Lock Indicator
M. Display Off Button
N. PM2.5/Timer Display
O. Display Lock Button
P. Air Outlets
Q. AirSight Plus™ Laser Dust Sensor
R. Air Inlets
S. Air Purifier Top
T. True HEPA 3-Stage Original Filter
U. Air Purifier Bottom
V. Anti-Skid Pads
---|---
CONTROLS & DISPLAY
Note: You can also use the VeSync app to control these functions, as well as additional app-only features (see page 13).
On/Off Button
- Turns the air purifier on/off.
- Press and hold for 5 seconds to configure the air purifier. See the VeSync in-app instructions for more information.
- Press and hold for 15 seconds to reset the air purifier and disconnect from Wi-Fi (see page 8).
Air Quality Indicator Rings
- These indicators use an automatic sensor to display the air quality: Blue (Very Good), Green (Good), Orange (Moderate), and Red (Bad).
Wi-Fi Indicator
- Turns on, off, or blinks to indicate pairing status. See the VeSync in-app instructions for more information.
Light Sensor
- When Light Detection is turned on in the VeSync app, this sensor detects the amount of light in the room to automatically adjust air purifier settings (see page 12).
Fan Speed Button
-
Cycles through fan speeds: low (1 indicator will light up), medium (2 indicators), high (3 indicators), and turbo
(4 indicators). -
Tapping the Fan Speed Button while the air purifier is in Auto Mode or Sleep Mode (if the display is on) will exit that mode.
Sleep Mode Button
- Turns Sleep Mode on/off (see page 9).
Timer Button
- Cycles through timer options (see page 11).
- Press and hold for 2 seconds to begin cycling through the timer options in 1-hour increments.
Auto Mode Button
- Turns Auto Mode on/off (see page 10).
USING YOUR PURIFIER (CONT.)
Display Off Button
- Turns the display off (see page 11).
- Tap any button (except ) to turn the display back on.
Display Lock Button
- Prevents current settings from being changed (see page 11). Press and hold for 3 seconds to turn Display
Lock-on/off.
- The Display Lock Indicator ( ****) will blink when any other button is tapped to indicate that Display Lock is on.
Check Filter Indicator Reset Button
- Press and hold for 3 seconds to reset the Check Filter Indicator.
- The Check Filter Indicator ( ) lights up when the filter should be checked to see page 16).
GETTING STARTED
-
Place the air purifier on a flat, stable surface with the display facing up. Twist the top half of the air purifier counterclockwise and lift up to remove it. [Figure 1.1]
-
Remove the filter from inside the bottom half of the air purifier. Remove the plastic packaging from the filter and place the filter back into the air purifier. [Figure 1.2]
-
Place the top half of the air purifier directly back onto the bottom half of the air purifier, aligning each corner. Press down to snap the top into place. [Figure 1.3]
a. The top of the air purifier can face in any direction, as long as the corners align. -
When using the air purifier, allow at least 15 inches / 38 cm of clearance on all sides. Keep away from anything that would block airflow, such as curtains. [Figure 1.4]
sync App Setup
Note: Due to ongoing updates and improvements, the VeSync app may be
slightly different than shown in the manual. In case of any differences,
follow the in-app instructions.
- To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store.
http://barcode.vesync.com/?v=new-1-1
Note: For Android™ users, choose “Allow” to use VeSync.
-
Open the VeSync app. Log In or Sign Up.
Note: You must create your own VeSync account to use third-party services and products. These will not work with a guest
account. With a VeSync account, you can also allow your family and friends to control your smart air purifier. -
Follow the in-app instructions to set up your smart air purifier.
Note: Your phone must have Location turned on while your phone is connecting to your smart air purifier. This is required to establish the Bluetooth® connection. You can turn Location off after your smart air purifier is finished connecting to
the VeSync app.
Wi-Fi Connection:
-
To disconnect Wi-Fi, press and hold the On/Off button for 15 seconds until the Wi-Fi indicator turns off. This will restore
the smart air purifier’s default settings and disconnect it from the VeSync app. -
To reconnect, please follow the instructions in the VeSync app for adding a device.
Connect with Amazon Alexa or Google Assistant™
You can use the VeSync app to connect your smart air purifier to Amazon Alexa
or Google Assistant™. Please follow the in-app
instructions to set up your voice assistant.
Note: You must create your own VeSync account to access voice assistants.
USING YOUR SMART AIR PURIFIER
Note: Using the VeSync app allows you to control your air purifier remotely and access additional functions and features (see page 13).
-
Plugin and tap to turn on the air purifier. [Figure 2.1]
-
Optionally, tap to change fan speed between low, medium, high, and turbo.
Note:
• The fan speed indicators will light up when active. 1 indicator will light up for low, 2 for medium, 3 for high, and 4 for turbo.
• Turbo speed is the loudest but cleans air the quickest.
• For best results, or to address a specific air quality issue such as smoke, run the air purifier at turbo speed for 15–20 minutes before using a lower speed.
• To effectively clean air, keep windows and doors closed while the air purifier is on. -
Tap to turn off the air purifier.
Sleep Mode
Sleep Mode operates quietly by using a fan speed lower than low speed.
- Tap to turn Sleep Mode on/off.
- Sleep Mode will turn off the display after 6 seconds if no other buttons are tapped.
Note:
• When the display is turned off, tap any button (except ) to turn the display back on. If you don’t tap another button, the display will turn off again after 6 seconds.
• The Check Filter Indicator will still turn on and stay on if it’s time to check your filter (see page 16).
Auto Mode
Auto Mode uses AirSight Plus™, a smart laser dust sensor inside the air
purifier, to adjust the fan speed automatically based on air quality. For
example, if the air quality is bad, the fan will automatically be set to high
speed.
Note:
- The air purifier will take 5 seconds to detect the air quality each time it is turned on. During this time, the air quality indicator rings will be blue. After 5 seconds, the air quality indicator rings will change color based on the detected air quality.
- Auto Mode does not use the turbofan speed.
- The sync app also supports additional auto modes: Quiet Auto Mode, Efficient Auto Mode, and ECO Auto Mode (see page 13).
PM2.5 Display
The PM2.5 value on the display shows the number of airborne particles (µg) that are detected per 1 cubic meter (m³) of air volume.
PM2.5 refers to particulate matter (PM) that is less than or equal to 2.5 microns (µm) in diameter. These particles, also known as “fine particles”, are so small that they can only be detected with an electron microscope, and they stay in the air longer than heavier particles such as dust and mold.
Your air purifier’s AirSight Plus Laser Dust Sensor detects the amount of PM2.5 particles that are in a given space (µg/m³). Generally, the lower the number, the better your air quality. A number above 115 indicates that there is an unhealthy amount of fine particles in the air.
Air Quality Indicator Chart
Indicator Color| Air Quality| Auto Mode Fan Speed| PM 2.5 Range
Blue| Very Good| Sleep Mode| 0–35 ug/m3
Green| Good| Low| 36–75 ug/m3
Orange| Moderate| Medium| 76–115 ug/m3
Red| Bad| High| > 115 ug/m3
Timer
You can set a timer for 1–12 hours.
-
Tap The display will switch from showing the PM2.5 reading to the time you’ve selected.
-
Tap repeatedly to select a time in 1-hour increments. If you don’t touch any buttons for 5 seconds, the display will switch to showing the PM2.5 reading and the timer will start automatically.
Note: Press and hold for 2 seconds to cycle through timer options automatically in 1-hour increments. -
The timer will count down from your selected time.
Note:
• While a timer is active, tapping will show the remaining time, rounded up to the nearest hour. Tap again within 5 seconds to add more time in 1-hour increments.
• You can see the exact remaining time in the VeSync app. -
When the timer is finished, the air purifier will turn off.
-
To cancel a timer, tap repeatedly until the display reads “ .
Note:
• You can change the fan speed at any time while the timer is on.
• The timer will restart if the time is changed.
• The air purifier will remember the last timer setting while turned off, but the timer will be canceled and need to be restarted.
• You can set a timer for 1–24 hours in the VeSync app.
Display Off
This turns off the display lights on the air purifier, including button lights
and indicator lights (except the Check Filter Indicator).
- Tap to turn off the display.
- Tap any button (except or ) to temporarily turn the display back on. If you don’t tap another button, the display will turn back off after 6 seconds.
- Tap to turn the display back on. The display will stay on.
Note: The Check Filter Indicator will still turn on and stay on if it’s time to check your filter (see page 16).
Display Lock
When the air purifier is on, you can lock the display to prevent settings from being accidentally changed. Buttons will not respond to being tapped.
-
Press and hold for 3 seconds to lock the display. The indicator will light up in the center of the display.
Note: If the display is turned off, the indicator will flash 3 times to show that the display has been locked, then turn off. -
The indicator will blink when any other button is tapped to indicate that Display Lock is on.
-
Tap and hold again for 3 seconds to unlock the display. The indicator will turn off.
Note:
• If the display is turned off, the indicator will flash 3 times to show that the display has been unlocked.
• Display Lock can still be used when the air purifier is in Standby Mode.
Standby Mode
The air purifier is in Standby Mode when it is turned off, but plugged in.
Note: Display Lock can be used while the air purifier is in Standby Mode to
keep the air purifier from being turned back on. The laser dust sensor will
still detect the surrounding air quality and give you updates in the VeSync
app.
Memory Function
When the air purifier is plugged in and turned off, it will remember its
previous fan speed, Sleep Mode, Auto Mode, Display Lock, Display Off, and
Light Detection settings. When the air purifier is unplugged and turned off,
it will only remember its previous fan speed, Sleep Mode, Auto Mode, and Light
Detection settings.
Light Detection
You can turn on Light Detection in the VeSync app. When this mode is turned
on, the Light Sensor will automatically adjust air purifier settings based on
the amount of light in the room.
- The display will automatically turn off when the room gets dark. If the air purifier is in Auto Mode, it will not use the high or turbofan speeds, even when the air quality is poor, to avoid making too much noise.
- When the room becomes light again, the air purifier will return to its previous settings. The display will automatically turn back on, and Auto Mode will no longer be limited.
Note: The air purifier will remember the last timer setting chosen (1–12 hours), but it will not automatically resume the timer. You will need to restart the timer after the air purifier is turned back on.
VeSync App Functions
The sync app allows you to access additional smart air purifier functions,
including those listed below. As the app develops, more features may become
available.
Remote Control
- Change any air purifier settings through the app, even while
Display Lock is on.
Air Quality Updates
- View real-time PM2.5 updates in the app.
- See your air quality history for the last four weeks.
Light Detection
- Access Light Detection, which uses the light sensor to detect the amount of light in the room and automatically adjust air purifier settings (see page 12).
Schedules
- Create and customize schedules for your air purifier to match your routines.
Timer Function
- Set a timer between 1–24 hours.
- Easily view the exact time remaining on a timer.
Filter Replacement Info
- Keep tabs on the remaining filter life by checking the filter life percentage in the app.
- Shop for replacement filters.
Auto Mode
- Access additional auto modes: Quiet Auto Mode, Efficient Auto Mode, and ECO Auto Mode.
- Quiet Auto Mode only uses low and medium fan speeds, even when the air quality is poor, to avoid making too much noise.
- Efficient Auto Mode lets you choose the size of the area you want to purify. The air purifier will use the highest fan speed (turbo) to clean the air for a designated amount of time. This time is based on 1 ACH and the size of the room, meaning how long it takes for the air purifier to clean all the air in your room one time, regardless of the air quality. After this, the model will adjust the fan speed according to the actual detected air quality in the room.
Note: Efficient Auto Mode is useful for purifying odors from the air. The air purifier’s sensor can only detect particles in the air, not smells. Efficient Auto Mode does not rely only on the sensor, but also the room size.
- ECO Auto Mode allows the fan speed to turn on/off intermittently when air quality is Very Good, to save electricity. When air quality is poor, the fan speed will be increased like standard Auto Mode.
ABOUT THE FILTER
The air purifier uses a 3-stage filtration system to purify the air.
A. Pre-Filter
- Captures large particles such as dust, lint, fibers, hair, and pet fur.
- Maximizes the filter’s life by protecting it.
B. H13 True HEPA Filter
- Captures at least 99.97% of airborne particles 0.3 microns (µm) in size.
- Traps small particles such as fine dust, smoke particles, and allergens such as pollen and pet dander.
C. Custom High-Efficiency Activated Carbon Filter
- Physically adsorbs smoke, odors, and fumes.
- Customized using Levoit’s exclusive ARC Formula™ to be especially effective for cooking smells and pet odors in a multi-pet household.
- The ARC Formula extends the life of the filter by chemically decomposing molecules trapped within the Activated Carbon Filter, which prevents oversaturation and secondhand pollution.
- Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulfide, and volatile organic compounds (VOCs).
Note: Levoit air purifiers filter airborne particles 0.3 microns in size. Arovast Corporation makes no claims that this air purifier helps reduce the COVID-19 virus.
Clean Air Delivery Rate
This air purifier has a Clean Air Delivery Rate of 410 cubic feet per minute
(CFM), or 697 m³/h. Clean Air Delivery Rate (CADR) measures the efficiency of
an air purifier by indicating the volume of clean air that an air purifier
produces per minute. This is based on the removal of dust, pollen, and smoke,
which are the 3 most common indoor air pollutants. The higher the CADR, the
more particles the air purifier will remove and the larger the area it can
clean.
The rating is measured at the air purifier’s highest speed.
Air Change Per Hour
The air change rate is how many times all of the air in a room can be purified
(or “changed”) by the air purifier in 1 hour. Air changes per hour (ACH) are
calculated with the recommended room size assuming 8 ft / 2.4 m ceilings. For
smaller rooms, the air change per hour will increase. This air purifier can
change air 5 times per hour at the max speed in a single, closed room up to
635 ft² / 59 m². This is measured at 5 ACH. The air purifier is effective for
larger rooms, but air purification will take longer, with fewer air changes
per hour. For example, the air purifier’s effective range is 1588 ft² / 147 m²
based on 2 ACH, or purifying the air in the room 2 times per hour.
Note: To effectively clean air, keep windows and doors closed while the air
purifier is on.
Humidity
Moisture may damage the filter. This air purifier should be used in an area
with a humidity level below 85% RH. If you use the air purifier in excessively
humid areas, the surface of the filter may become moldy.
Note: Water or moisture will allow mold to grow. To solve a mold problem,
get rid of the source of the moisture and clean up the mold.
Essential Oils
Do not add essential oils to the air purifier or filter. The filter will
become damaged by the oil and will eventually release an unpleasant smell. Do
not use diffusers near the air purifier.
CARE & MAINTENANCE
Cleaning the Smart Air Purifier
- Unplug before cleaning.
- Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry.
- Vacuum the inside of the air purifier.
- Do not clean with abrasive chemicals or flammable cleaning agents.
Check Filter Indicator
will light up as a reminder to check the filter. If you use your air purifier consistently (24 hours of daily use), the indicator should turn on after about 6–12 months. You may not need to change your filter yet, but you should check it when turns on.
When your air purifier is set up with the VeSync app, you can also check the app to see your remaining filter life. You will also receive a notification from VeSync when it’s time to check your filter.
The VeSync app uses a scientific algorithm to determine your filter life based on air quality, amount of use, and other factors.
Cleaning the Filter
The outer pre-filter should be cleaned every 2–4 weeks to increase efficiency
and extend the life of your filter. Clean the pre-filter using a soft brush or
vacuum hose to remove hair, dust, and large particles. Do not clean the filter
with water or other liquids.
Resetting the Check Filter Indicator
Reset the Check Filter Indicator when:
A. lights up red.
- Replace the filter (see page 17).
- Turn on the air purifier.
- Press and hold the button for 3 seconds.
- will turn off when successfully reset.
B. The filter was changed before lit up.
- Press and hold the button for 3 seconds.
- The will flash for 3 seconds.
- will turn off when successfully reset.
Filter | When to Clean | How to Clean | When to Replace |
---|---|---|---|
Pre-Filter | Every 2–4 weeks | Use a soft brush or vacuum hose | 6–12 months |
True HEPA& Activated Carbon Filter | Do not clean |
When Should I Replace the Filter?
The filter should be replaced every 6–12 months. You may need to replace your
filter earlier or later depending on how often you
use your air purifier. Using your air purifier in an environment with
relatively high pollution may mean you will need to replace the filter more
often, even if is off.
You may need to replace your filter if you notice:
- Increased noise when the air purifier is on
- Decreased airflow
- Unusual odors
- A visibly clogged filter
Note:
- To maintain the performance of your air purifier, only use official Levoit filters. For more information, contact Customer Support (see page 23).
- Remember to reset after changing the filter (see page 16).
Cleaning the AirSight Plus Laser Dust Sensor
The right Plus Laser Dust Sensor can be blocked by dust, which affects the sensor’s accuracy. Clean the sensor every 3 months. Using your air purifier in an environment with more dust may mean you will need to clean the sensor more often.
- Unplug the air purifier.
- Place the end of a vacuum cleaner over the sensor openings. [Figure 3.2]
- Turn the vacuum on for at least 10 seconds to clean out dust.
Replacing the Filter
-
Unplug the air purifier. Flip the air purifier over or turn it on its side. Remove the filter cover (see Getting Started, page 7).
-
Remove the old filter.
-
Clean out any remaining dust or hair inside the air purifier using a vacuum hose.
Note: If you remove and set aside the top half of the air purifier, you can use water to clean the bottom half of the air purifier.
Do not use water or liquids to clean the top half of the air purifier. [Figure 3.3] -
Unwrap the new filter and place it into the housing (see Getting Started, page 7).
-
Replace the cover. Plugin the air purifier.
-
Reset the Check Filter Indicator (see page 16).
Storage
If not using the air purifier for an extended period of time, wrap both the
air purifier and the filter in plastic packaging and store in a dry place to
avoid moisture damage.
TROUBLESHOOTING
Problem | Possible Solution |
---|---|
An air purifier will not turn on or respond to button controls. | Plugin the |
air purifier.
Check to see if the power cord is damaged. If it is, stop using the air
purifier and contact Customer Support (see page 23).
Plug the air purifier into a different outlet.
The air purifier may be malfunctioning. Contact Customer Support (see page
23).
Airflow is significantly reduced.| Make sure the filter is removed from its
packaging and properly in place (see page 7).
Tap to increase the fan speed.
Leave 15 inches / 38 cm of clearance on all sides of the air purifier.
The pre-filter may be clogged by large particles, such as hair or lint,
blocking airflow. Clean the pre-filter (see page 16).
Replace the filter (see page 17).
Air purifier makes an unusual noise while the fan is on.| Make sure the filter
is properly in place with plastic packaging removed (see page 7).
Make sure the air purifier is operating on a hard, flat, level surface.
Replace the filter (see page 17).
The air purifier may be damaged, or a foreign object may be inside. Stop using
the air purifier and contact Customer Support (see page 23). Do not try to
repair the air purifier.
Strange smell coming from the air purifier.| Clean the filter, or replace if
necessary.
Contact Customer Support (see page 23).
Make sure not to use your air purifier in an area with high humidity or while
diffusing essential oils.
Problem | Possible Solution |
---|---|
Tap to increase the fan speed. Make sure no objects are blocking the sides |
or top of the air purifier (the inlet or outlet).
Make sure the filter is removed from its packaging and properly in place (see
page 7).
Close doors and windows while using the air purifier.
If the room is larger than 635 ft² / 59 m², air purification will take longer.
Replace the filter (see page 17).
is still on after replacing the filter.| Reset the Check Filter Indicator
(see page 16).
has not turned on after 6–12 months.| is a reminder for you to check the
filter and will light up based on how much the air purifier has been used, as
well as other factors (see page 16). If you don’t use your air purifier often,
will take longer to turn on.
Air Quality Indicator always stays red.| The AirSight Plus Laser Dust Sensor
may need to be cleaned (see page 17).
If you’re using an ultrasonic humidifier near the air purifier, the mist may
affect the accuracy of the AirSight Plus Laser Dust Sensor. The sensor will
detect the large mist particles, and the Air Quality Indicator may turn red.
Avoid using an ultrasonic humidifier near the air purifier, or avoid using
Auto Mode.
Air Quality Indicator always stays blue, even when the air quality is poor.|
The AirSight Plus Laser Dust Sensor detects airborne particles, but it cannot
detect gas. Make sure there isn’t gas polluting the air.
The display shows Error Code “E1”.| The motor has malfunctioned. Please
contact Customer Support (see page 23).
VESYNC APP TROUBLESHOOTING
My smart air purifier isn’t connecting to the VeSync app.
- Make sure your phone has Bluetooth® turned on and is not currently connected to another Bluetooth device.
- During the setup process, you must be on a secure 2.4GHz Wi-Fi® network. Confirm that the network is working correctly.
- Make sure the Wi-Fi password you entered is correct.
- There should be no spaces at the beginning or end of the password.
- Test the password by connecting a different electronic device to the router.
- If you’re manually typing in the SSID and password, double-check that both are entered correctly.
- Try moving your air purifier closer to the router. Your phone should be as close as possible to your air purifier.
- Your router may need to be at a higher location, away from obstructions.
- Make sure your air purifier and router are away from appliances (such as microwave ovens, refrigerators, electronic devices, etc.) to avoid signal interference.
- If you’re using a VPN, make sure it’s turned off while setting up your air purifier.
- Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, the air purifier will not be able to access your Wi-Fi network, and setup will fail.
Note: Portal authentication means that you need to sign in to your Wi-Fi network through a web page before you can use the Internet.
My air purifier is offline.
- Make sure the air purifier is plugged in and has power, then refresh the VeSync menu by swiping down on the screen.
- Make sure your router is connected to the internet and your phone’s network connection is working.
- Delete the offline air purifier from the VeSync app. Swipe left (iOS®) or press and hold (Android™), then tap Delete. Reconfigure the air purifier with the VeSync app.
Note: Power outages, internet outages, or changing Wi-Fi routers may cause the air purifier to go offline.
If your problem is not listed, please contact Customer Support (see page 23).
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End-users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. The availability of some specific channels and/ or operational frequency bands are country-dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end-user.
WARRANTY INFORMATION
Product Name | Levoit VeSync Core™ 600S Smart True HEPA Air Purifier |
---|---|
Model | LAP-C601S-WUS |
For your own reference, we strongly recommend that you record your order ID
and date of purchase.
Date of Purchase|
Order ID|
Terms & Policy
Arovast Corporation (“Arovast”) warrants this product to the original
purchaser to be free from defects in material and workmanship, under normal
use and conditions, for a period of 2 years from the date of original
purchase.
Arovast agrees, at our option during the warranty period, to repair any defect
in material or workmanship or furnish an equal product in exchange without
charge, subject to verification of the defect or malfunction and proof of the
date of purchase.
There is no other express warranty. This warranty does not apply:
- If the product has been a movie
- To damages or defects occurring during commercial use, rental use, or any use for which the product is not intended;
- To damages or defects exceeding the cost of the product.
Arovast will not be liable for indirect, incidental, or consequential damages in connection with the use of the product covered by this warranty.
This warranty extends only to the original consumer purchaser of the product
and is not transferable to any subsequent owner of the product regardless of
whether the product is transferred during the specified term of the warranty.
This warranty does not extend to products purchased from unauthorized sellers.
Arovast’s warranty extends only to products purchased from authorized sellers
that are subject to Arovast’s quality controls and have agreed to follow its
quality controls.
All implied warranties are limited to the period of this limited warranty.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation
or exclusion may not apply to you.
If you discover that your product is defective within the specified warranty period, please contact Customer Support via support@levoit.com. DO NOT dispose of your product before contacting us. Once our Customer Support Team has approved your request, please return the product with a copy of the invoice and order ID.
Every Levoit product automatically includes a 2-year warranty. To make the customer support process quick and easy, register your product online at www.levoit.com/warranty.
This warranty is made by:
Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
CUSTOMER SUPPORT
If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.
Distributed by Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
Email: support@levoit.com
Toll-Free: 888-726-8520
Support Hours
Mon–Fri, 9:00 am–5:00 pm PST/PDT
*Please have your order invoice and order ID ready before contacting Customer Support.
The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model’s CADR for Smoke and the electrical energy it consumes, or CADR/Watt.
ATTRIBUTIONS
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its
affiliates.
Google, Android, and Google Play are trademarks of Google LLC.
App Store® is a trademark of Apple Inc.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
iOS is a registered trademark of Cisco Systems, Inc. and/or its affiliates in
the United States and certain other countries.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Arovast Corporation is under
license. Other trademarks and trade names are those of their respective
owners.
/LEVOIT
/LEVOIT
/LEVOITLIFESTYLE
/LEVOITLIFESTYLE
/LEVOITLIFESTYLE
LEVOIT.COM
JJ080921AC-M1_ LAP-C601S-WUS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>