enbrighten 63165 Sconce Light User Guide
- June 6, 2024
- enbrighten
Table of Contents
enbrighten 63165 Sconce Light
Quick Start Guide
Congratulations on your new Sconce light by Enbrighten! Blending old-world
décor with a clean and modern style, this lamp will enhance your space with
premium illumination. Before installing, read through these instructions and
take note of any safety warnings. You don’t need special tools to install this
fixture. Be sure to follow the
steps in the order given. Under no circumstances should a fixture be hung on
house electrical wires, nor should a swag-type fixture be installed on a
ceiling, which contains a radiant type heating system. If you are unclear how
to proceed, consult a qualified electrician. NOTE: Proper wiring is essential
for the safe operation of this fixture
INSTALLATION
Carefully remove the fixture from the packaging and check that all parts are included as shown in the figure. Be careful not to misplace any of the included screws or parts that are needed to install this fixture.
-
Turn power OFF
Ensure power is turned OFF at the circuit breaker or fuse box. -
Install mounting bracket
Secure the mounting bracket (C) onto your wall’s junction box with the included mounting screws (F). -
Neutral and live wires
Using the wire nuts (B), connect the white fixture wire to the white (neutral) supply wire from the junction box. Then connect the black fixture wire to the black (live) supply wire from the junction box. -
Ground wire
Connect the ground wire from the junction box and ground wire from the fixture with a wire nut or the ground screw (E) on the mounting bracket (C). -
Secure wiring
Wrap electrical tape (not included) around the wire nuts (B) to ensure they are secured. Then, gently arrange all wiring inside the junction box, making sure there are no exposed connections. -
Attach canopy
Align the canopy (G) with the pre-installed screws (D) on mounting bracket (C) and fasten it into place using the two cylinder nuts (H). -
Install glass shades
Unscrew the socket rings (J) and hold the glass shades (I) in place with the larger openings facing upwards. Then, carefully screw each socket ring back into place — ensure the rounded ends are facing away from the fixture and not contacting glass. -
Insert bulb
Thread the included T bulb into the socket. Note: Use medium base 60W MAX incandescent bulbs or 60W equivalent SBCFL or SBLED bulbs as an alternative. -
Restore power
With the fixture properly installed, restore power at the circuit breaker or fuse box and turn the light on using the associated in-wall switch.
COMPONENTS LEGEND
- Junction box (not included)
- Wire nuts (x3)
- Mounting bracket
- Pre-installed screw/nut (x2)
- Grounding screw
- Mounting screw (x2)
- Canopy
- Cylinder nut (x2)
- Glass shade
- Socket ring
FOR YOUR SAFETY
WARNING: BE SURE THAT ELECTRICAL POWER TO THE WIRES YOU ARE WORKING ON IS SHUT OFF AT THE CIRCUIT BREAKER OR FUSE BOX.
CLEANING
To clean this fixture, wipe it with a soft and dry cloth. Do not use abrasive
materials such as scouring pads or powders, steel wool or abrasive paper
WARNING
RISK OF ELECTRIC SHOCK
- DO NOT USE IN WET LOCATIONS
- USE INDOORS ONLY
- TURN POWER OFF BEFORE SERVICING – SEE INSTRUCTIONS
- PROPERLY GROUND FIXTURE
- ENSURE THAT NO BARE WIRES ARE EXPOSED OUTSIDE THE ELECTRICAL CONNECTIONS
RISK OF INJURY
- SOME METAL PARTS IN THE FIXTURE MAY HAVE SHARP EDGES. TO PREVENT CUTS AND SCRAPES, WEAR GLOVES WHEN HANDLING THE PARTS.
- DO NOT OPERATE THE UNIT WITH A MISSING OR DAMAGED LENS
- ACCOUNT FOR SMALL PARTS AND DESTROY PACKAGING MATERIAL AS THESE MAYBE HAZARDOUS TO CHILDREN
- WALL MOUNT ONLY
CAUTION – RISK OF FIRE
PRECAUTION – RIESGO DE INCENDIO MAX 60 WATTS TYPE A 120 60HZ AC ONLY MADE IN
CHINA MAX 60 WATTS TIPO A 120V 60Hz EXCLUSIV AMENTE PARA CA HENCO EN CHINA
THANK YOU FOR YOUR PURCHASE
Read instructions or watch easy-to-follow videos.
visit byjasco.com/63165i
EXCLUSIVE DEALS
For deals, to register your purchase and to tell us how we’re doing, simply
scan the code or visit byjasco.com/deals
Discover more
innovative lighting at byjasco.com/lighting
Like our product?
Leave a review on your favorite retailer website or
amazon.com
Having problems?
Let us know how we can help. Call
1-800-654-8483 between 7 AM-8 PM, M-F,
Central Time.
MADE IN CHINA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City,
OK 73114. This Jasco product comes with a 2-year limited warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F,
Central Time.