WISDOM SCS-2 High Output RTL Subwoofer Owner’s Manual
- June 6, 2024
- WISDOM
Table of Contents
WISDOM SCS-2 High Output RTL Subwoofer
DOCUMENT CONVENTIONS
This document contains general safety, installation, and operation
instructions for the Wisdom Audio High Output RTL® Subwoofer. It is important
to read this document before attempting to use this product. Pay particular
attention to:
WARNING: Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result in injury or death.
CAUTION: Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result in damage to or destruction of part of or the entire product.
Note: Calls attention to information that aids in the installation or operation of the product.
Introduction
Congratulations on purchasing your Wisdom Audio subwoofer. The SCS-2’s
Regenerative Transmission LineTM technology delivers tremendous bass
performance in terms of depth, dynamics, and distortion resulting in
articulate bass that integrates seamlessly with high-resolution main speakers
such as Wisdom Audio’s Sage Series.
This manual focuses on the SCS-2 subwoofer itself.
While we expect your local Wisdom Audio dealer to take care of the setup and
calibration of the system, we still recommend that you at least briefly review
this and the other manuals (SA-DSP Series amplifiers) to understand the
system’s full capabilities.
Overview
Your Wisdom Audio SCS-2 subwoofer uses a modern implementation of an old idea
for high quality, low distortion bass reproduction. While the roots of the
Regenerative Transmission LineTM go back to the 1950’s, it is the combination
of modern computer modeling and the vastly more powerful motors of
contemporary driver design that make the RTLTM so special.
There is a class of bass enclosures that has been around since the 1950’s,
which can be described generically as “low frequency tapped waveguides” or
“tapped pipes.” It was an idea that was a bit ahead of its time then since
fully optimizing its use required both powerful drivers and computer modeling.
But, if you are into such things, check out US Patent 2,765,864 (filed in
1955), and an AES paper published in 1959, “Analysis of a Low-Frequency
Loudspeaker System.”
We have utilized sophisticated modeling software to fully optimize our
enclosures and have developed drivers that are specifically optimized for this
application. We call our unique implementation of this relatively old idea a
“Regenerative Transmission LineTM” subwoofer or “RTL” sub for short.
All dynamic drivers develop energy on both sides of the diaphragm, with the
rear energy being 180° out of phase with the front energy. If you allow the
driver to operate in free space (no enclosure), the front and rear energies
largely cancel each other out – especially at low frequencies.
In our Regenerative Transmission LineTM subwoofer, the energy from the back
side of the driver is sent along a long, folded path in such a way that its
lowest frequencies arrive back at the front side of the driver in phase,
effectively summing to an increase of 6 dB in output. Thus, the energy from
both sides of the woofer cone is used in a productive way, resulting in a
substantial reduction in distortion and an effective surface area double
compared to what you would otherwise expect. As an example, the effective
radiating surface area of the two 5″ x 7″ woofers in the SCS-2 is equivalent
to one 12″ –13″ woofer in more conventional enclosures.
The results are quite stunning. Low frequencies are strikingly dynamic and
responsive and integrate quite seamlessly with the fast and detailed Sage
Series planar magnetic hybrids. As an example, the SCS-2 can output more than
120 dB at 25 Hz.
Unpacking the SCS-2
The Wisdom Audio SCS-2 subwoofer is a substantial piece of equipment. Please
exercise caution when unpacking your SCS-2 to ensure that you do not strain
yourself from its (perhaps unexpected) weight.
CAUTION: Do not attempt to lift your SCS-2 by yourself. Unpacking this
subwoofer is clearly a two-person job. It is unwise for a single person to
attempt doing so. Do not attempt to lift your SCS-2 while bending or twisting
from the waist. Use your legs for lifting, not your back. Always stand as
straight as possible and keep the SCS-2 close to your body to reduce strain on
your back.
Subwoofer Placement
Subwoofers offer somewhat greater flexibility in placement since the
frequencies they reproduce are not readily localizable by the human ear. This
is because the wavelengths they reproduce are more than ten feet (3 meters)
long, but our ears are located only about 6-7 inches (17 cm) apart. Thus,
these extremely long waves do not contribute meaningfully to the imaging that
the main speakers create.
However, this fact does not mean that the placement of the subwoofers has no
effect on the sound quality in the room. Far from it. The subwoofers are the
most likely to suffer from the response irregularities introduced by the room
itself, operating as they do below approximately 80 Hz in most systems.
Recent research into the behavior of rooms as a function of speaker placement has concluded that – if you have the freedom to do so – there are significant advantages to placing several smaller subwoofers around the room, rather than relying on a single large woofer. Moreover, the optimum placement is usually centered on each of the four walls, or deep in the corners of the room. If you have the luxury of doing so, this simple placement strategy can reduce the size of the room’s response irregularities from 20 decibels down to perhaps as little as 6-8 decibels – a tremendous improvement.
Room Treatment
Rectangular rooms have six reflecting surfaces (four walls, ceiling, and
floor)
that reflect sound to the listener, after various delays introduced by the
indirect routes the sound take on their way to the listener. These first
reflections are particularly damaging to sound quality. Looking at the
simplest case of stereo reproduction, you have a minimum of twelve first
reflection points in your room that deserve some attention.
Unfortunately, it is often difficult to do much about the ceiling and floor
reflections, even though they are arguably the most destructive. (The
minimization of these reflections is one of the strongest arguments for the
tall, line source loudspeakers that Wisdom Audio builds.) This leaves you with
eight “first reflections” that you
should consider minimizing somehow. These points are easily found by having an
assistant slide a small mirror along the four walls of the room, while you sit
at the listening position. Any place on the wall where you can see a re-
flection of any speaker is a first reflection point. Concentrate on the first
reflections for the Left and Right speakers first.
If you can, arrange to apply either absorption or diffusion at these eight
points
(don’t forget the wall behind you). Absorption can be as simple as heavy,
insulated drapes; diffusion can be provided by a well-stocked bookcase with
books of varied sizes. Alternatively, you can buy purpose-designed room
treatments (some sources listed under References, below).
The important things to remember are these: a good room should have a balance
of absorption and diffusion; and if you are going to treat only a few areas of
the room, the first reflection points are the most important ones to treat.
Professional Acoustic Design
Does this all sound too complicated? For good reason: it is complicated.
The difference between the average listening room and one that is
professionally designed and implemented is huge. A great listening room will
disappear to an astonishing degree, letting the experiences captured in your
recordings speak to you directly. A well-designed room is also quieter and
more comfortable. It can easily become a favorite retreat for peace and
rejuvenation.
If you decide to investigate the possibility of improving your room with the
help of a professional, it is important to find someone who focuses on
residential spaces. Most acousticians are trained to deal with large spaces –
airports, auditoriums, lobbies in commercial buildings, etc. The problems seen
in “small” rooms
(residential spaces) are quite different, and outside the experience of most
acousticians. Find someone who specializes in and has a great deal of
experience designing home studios, home theaters, and the like. Your Wisdom
Audio dealer may be such a person; failing that, he/she can help you find such
a professional.
References
Books on Acoustics
The Master Handbook of Acoustics, F. Alton Everest, TAB Books
Sound Reproduction: The Acoustics and Psychoacoustics of Loudspeakers and
Rooms by Dr. Floyd Toole, Focal Press
Setting Up your SCS-2
The unusual form factor of the SCS-2 allows it to be used effectively in many situations where a more conventional “bass cube” would be either cumbersome or impossible. Examples include locating it behind a couch, in the small space between the couch and the wall or lying flat under a set of risers in a home theater with multiple rows of seating.
The SCS-2 also includes three locations for the exit of the Regenerative
Transmission LineTM. As shipped from the factory, the vent is located on the
end of the SCS-2 enclosure. However, if your location would be better served
by the vent being on one side or the other, your dealer can easily swap the
grille for the solid aluminum plate that covers the desired exit location.
There is no difference in performance, but often a great difference in
application flexibility.
VERY IMPORTANT! You MUST use an SW-1 or SA-DSP amplifier. If using another
brand of amplifier, you must make sure you use a specific type of surround
processor, as the SCS-2 requires special 48dB Butterworth bandpass filter and
PEQ settings for the RTL to work properly.
Connections
Speaker Terminals
Connect the + and – terminals of the power amplifier that is driving the SCS-2
to the corresponding + and – terminals of the SCS-2, located in the recessed
input cup.
Note that while Wisdom Audio amplifiers are all non-inverting, some other
brands of power amplifiers do invert polarity. It is always best to check the
polarity of all your speakers with a polarity checker such as can be found in
the AudioTools suite from Studio Six Digital, or with dedicated hardware such
as the Galaxy Cricket Test Set.
North American Warranty
Standard Warranty
When purchased from and installed by an authorized Wisdom Audio dealer, Wisdom
Audio loudspeakers are warranted to be free from defects in material and
workmanship under normal use for a period of 10 years from the original date
of purchase on the cabinet and passive drivers.
IMPORTANT: Wisdom Audio loudspeakers are designed for installation and
operation in environmentally controlled conditions, such as are found in
normal residential environments. When used in harsh conditions such as
outdoors or in marine applications, the warranty is three years from the
original date of purchase.
During the warranty period, any Wisdom Audio products exhibiting defects in
materials and/or workmanship will be repaired or replaced, at our option,
without charge for either parts or labor, at our factory. The warranty will
not apply to any Wisdom Audio products that has been misused, abused, altered,
or installed and calibrated by anyone other than an authorized Wisdom Audio
dealer.
Any Wisdom Audio product not performing satisfactorily may be returned to the
factory for evaluation. Return authorization must first be obtained by either
calling or writing the factory prior to shipping the component. The factory
will pay for return shipping charges only if the component is found to be
defective as mentioned above. There are other stipulations that may apply to
shipping charges.
There is no other express warranty on Wisdom Audio products. Neither this
warranty nor any other warranty, express or implied, including any implied
warranties of merchantability or fitness, shall extend beyond the warranty
period. No responsibility is assumed for any incidental or consequential
damages. Some states do not allow limitations on how long an implied warranty
lasts and other states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply
to you.
This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state. This warranty is applicable in the
United States and Canada only. Outside of the U.S. and Canada, please contact
your local, authorized Wisdom Audio distributor for warranty and service
information.
Obtaining Service
We take great pride in our dealers. Experience, dedication, and integrity make
these professionals ideally suited to assist with our customers’ service
needs.
If your Wisdom Audio loudspeaker must be serviced, please contact your dealer.
Your dealer will then decide whether the problem can be remedied locally, or
whether to contact Wisdom Audio for further service information or parts, or
to obtain a Return Authorization. The Wisdom Audio Service Department works
closely with your dealer to solve your service needs expediently.
IMPORTANT: Return authorization must be obtained from Wisdom Audio’s
Service Department BEFORE a unit is shipped for service.
It is extremely important that information about a problem be explicit and
complete. A specific, comprehensive description of the problem helps your
dealer and the Wisdom Audio Service Department locate and repair the
difficulty as quickly as possible.
A copy of the original bill of sale will serve to verify warranty status.
Please include it with the unit when it is brought in for warranty service.
WARNING: All returned units must be packaged in their original packaging,
and the proper return authorization numbers must be marked on the outer carton
for identification. Shipping the unit in improper packaging may void the
warranty, as Wisdom Audio cannot be responsible for the resulting shipping
damage.
Your dealer can order a new set of shipping materials for you if you need to
ship your loudspeaker and no longer have the original materials. There will be
a charge for this service. We strongly recommend saving all packing materials
in case you need to ship your unit someday.
If the packaging to protect the unit is, in our opinion or that of our dealer,
inadequate to protect the unit, we reserve the right to repackage it for
return shipment at the owner’s expense. Neither Wisdom Audio nor your dealer
can be responsible for shipping damage due to improper (that is, non-original)
packaging.
Specifications
All specifications are subject to change at any time in order to improve the product.
- Number of required amplifier channels: 1
- Frequency response: 28Hz – 80 Hz ± 3dB relative to the target curve
- Impedance: 4Ω
- Sensitivity: 93 dB/2.83V/1m
- Power handling, peak: 1000w
- Maximum SPL: 120dB / 25 Hz /1m
- Dimensions: See appropriate dimensions drawings on next page
- Shipping weight, each: 72 lbs. (33 kg)
For more information, see your Wisdom Audio dealer or contact:
Wisdom Audio
1572 College Parkway, Suite 164
Carson City, NV 89706
wisdomaudio.com
information@wisdomaudio.com
775-887-8850
SCS-2 Dimensions
WISDOM and the stylized W are registered trademarks of Wisdom Audio.
Wisdom Audio
1572 College Parkway, Suite 164
Carson City, Nevada 89706 USA
TEL 775-887-8850
FAX 775-887-8820
wisdomaudio.com
SCS-2 OM © 12/2021 Wisdom Audio, Inc. All rights reserved. Printed in U.S.A.