WISDOM JQD-001 Vanity Mirror Lights Instructions
- June 5, 2024
- WISDOM
Table of Contents
JQD-001 Vanity Mirror Lights
Instruction Manual
See Yourself Better!!!
Wisdom in design, Enjoy your life!
Thank you for purchasing our company’s DIY makeup mirror fill Light products, this product supports DIY’s own home mirrors, instantly making their own mirror into a modern fashion makeup with LED Fill mirror. Even more interesting is that you can adjust the color temperature by yourself!
Product Features
- The standard USB power supply, and safety voltage.
- PC soft mask, don’t stab the eyes.
- Concealable wiring, simple and neat.
- All transparent lines are beautiful and stylish.
- Multilevel luminance adjustable, beautiful skin, and beautiful face.
- The color temperature is adjustable with the buttons.
Product parameters:
Product Name: Vanity Mirror Lights.
Bulb Size: 45 X 45 X 51 mm.
Power Supply: Standard USB 5V 2A or above.
LED color temperature: 3000K and 6500K.
Power: a single lamp’s maximum power is 0.8W.
Material: ABS lamp-holder and PC lampshade.
Wisdom in design:
It is easy and convenient to be installed on
mirror glass, wood, plastic, and metal surface.
Rest assured dressing:
USB 5V low voltage power supply, safe! Multilevel luminance adjustable,
suitable for different dressing needs.
Three kinds of color temperatures can be adjusted: Warm White, Natural White,
and Ture White.
Use the installation details see the inside pages.
Functional Description
Application notes
- It is recommended to choose a 2A or above USB power adapter, mobile phone charger, and other standard USB power banks that can be used.
- The product is fixed by double-sided adhesive paste, requiring the installation surface must be clean, dry, smooth, and without rust and oil.
- The wire can be adjustable through the winding between the base slot, and the bulb spaces can be adjusted between 15-33CM.
Reminded: When the bulb is pasted, please press the product for about 30 seconds, which will take 24 hours to achieve the best adhesive strength.
See Yourself Better!!!
Install reference diagram
Special feature:
There are two bayonet mounts on the side of the base, allowing the wires to be
routed out of it, hiding the wires to the mirror frame or the back of the
mirror. The USB port on the side of the control switch can charge the cell
phone or other electrical appliances.
Installation steps
- Cosmetic mirror or be installed surface treatment: should be sticky surface should be dry, clean, and no rust, oxidation, grease, dust and other pollutants.
- According to the design of the number of mirrors and bulbs, each bulb installation location, note the lamp spacing of up to 33 CM,the minimum spacing of about 15 CM.
- Remove the product to determine the power and control switch to place the seat is appropriate to determine the first light paste location (with the control switch to connect the first line).
- The bottom of the product is a double-sided adhesive tape that tears off the film and is then affixed to the first lamp position, forced down so that double-side adhesive is pasted better. Make the tape and the bonding surface get full contact.
- When you use the lights, you can adjust the color temperature and the brightness with the function buttons. And choose your favorite color!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>