SALUS SW600 Window/Door Sensor User Manual
- June 6, 2024
- SALUS
Table of Contents
SW600
Introduction
A window/door sensor is a small, wireless piece of equipment that detects when a window/door is open or closed. The Slim Window/Door Sensor is used primarily on windows and doors where the installation location is narrow. This product must be used with the Universal Gateway (UG600/UGE600) and the Salus Smart Home App
Product Compliance
This product complies with the essential requirements and other relevant
provisions of Directives 2014/53/EU (RED) and 2011/65/EU. The full text of the
EU Declaration of
Conformity is available at the following internet address:
www.saluslegal.com 2405-2480MHz; <14dBm
Safety Information
Use in accordance with the regulations. Indoor use only. Keep your equipment completely dry. Disconnect your equipment before cleaning it with a dry towel.
Positioning Power-up & Pairing
|
---|---
Follow the onscreen instructions up to
Install the slim window/door senor using the screws or the double-sided tape.
Opened/Closed
Factory reset
Keep the reset button pressed for 4 seconds when inserting back the battery. The device will reset and enter pairing mode.
DISTRIBÚTOR:
Thermo-control SK s.r.o.
Podunajská 31
821 06 Bratislava
obchod@thermo-control.sk
www.thermo-control.sk
IMPORTER:
QL CONTROLS Sp. z o.o. Sp. k.
ul. Rona 4, 43-262 Kobielice
PRODUCER:
Salus Limited
6/F, Building 20E, Phase 3, Hong Kong Science
Park, 20 Science Park East Avenue, Shatin,
New Territories, Hong Kong
T: +44 (0) 1226 323961
E: sales@salus-tech.com
Dátum vydania: 06/2021
V001
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>