Lenco CR-630 DAB+FM Stereo Clock Radio User Manual

CR-630 DAB+FM Stereo Clock Radio
User Manual

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles, and other heat-generating products or naked flame. The device can only be used in moderate climates.
   Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb the normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances.
    If you notice smoke, an excessive build-up of heat, or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol-based fluids.
    To remove severe stains, you may use a damp cloth with diluted detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device, or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has a USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use a USB extension cable because it can cause interference resulting in failure of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for nonprofessional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when the liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with a power cable or AC power adaptor:
    • If any trouble occurs, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket-outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require an earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    •  Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:
    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • f you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:
    • Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
    • Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

| WARNING: When participating in the traffic listening to a personal music player can make the listener less aware of potential dangers such as approaching cars.
---|---
| WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.

Product Overview

Instructions

Basic operations
Switch on your radio for the first time
Connect the radio with Power Adaptor provided.
Plug the other end into a power socket, the unit will be on and display “Welcome to digital Radio” and go to standby mode.
Press the Standby/Mode button to turn on the radio.

Selecting the modes
When the radio is turned on, press the Mode button repeatedly to switch between DAB + and FM
modes.
DAB+ operation
When you first select DAB+ radio, press and hold the Scan button it will search for and store all available DAB+ stations. Once the Auto search is completed, your radio will select the first station tuned.
Selecting between stations. With your radio on:
Press the Mode button to select DAB+ mode.
Press the Prev or Next button to navigate through the list of stations.
Press Enter button to tune to the station currently shown on the display.
You may adjust volume by pressing Vol+ or Vol- button.
FM operation
With your radio on, press the Mode button to select FM mode.
Press the Prev or Next button to manually tune to specific frequencies by 0.05MHz per step.
The radio also includes the scan feature of FM, allowing you to automatically tune to FM stations.
Press and hold the Next button to automatically search for the next available radio station. When a station is found it will be automatically played.
You can search for stations in the opposite direction by pressing and holding the Prev button.
Storing stations as presets
Radio can store 10 stations as presets in both DAB+ and FM mode. To store a preset:
Tune to the station you want to store, press and hold the reset button until the display shows ‘preset store’ , now with the prev or next button to select desired preset for the store.
Press the Enter button to store the station. The message “Preset xx stored” will appear on the display.
Recall stations saved as presets
To recall a preset station:
Select the band (DAB+ or FM) of the station by pressing the Mode button.
Press the Preset button to recall the preset station, then use the Prev or Next button to browse through your presets and press the Enter button to confirm.
Setting the time automatically
When you first turn on the radio it will automatically synchronize to the local time while searching for DAB+ stations. If the time hasn’t set itself try to change the location of the device for a better signal.
System Settings
With the unit on, press and hold the Info/Menu button. This will open the “Set Menu”.
Press the Prev or Next button to select your desired Sub-option.
Setting the Time/Date
Press and hold the Info/Menu button, the <Time/Date> will be shown on the screen, press Enter button to enter time setting mode.
The hour digit will flash. Press the Prev or Next button to set the hour. Press the Enter button to confirm.
Repeat the last two steps to set the minutes, year, month, and date.
System Version
You can check the software version number by pressing and holding the Info/Menu button.Press the Prev or Next button until is shown on the screen, press the Enter button to confirm.
Resetting the radio
Resetting the radio will delete all the tuned DAB+ stations and all the preset memory stations in FM and DAB+ modes. To reset the radio:
Press and hold the Info/Menu button.
Press the Prev or Next button until is shown on screen, press the Enter button and or is shown on the screen. Use Prev or Next button to select .
Press the Enter button and the radio will be reset.
Sleep setting
Press the Sleep button.
Press the Prev or Next button to select either OFF-120-90-60-45-30-15-5 minutes.
Press the Enter button to confirm.

Using the alarm

Alarm Setting
With the radio on, press the Alarm button then presses Enter button, OFF will flash on display
Then press the Prev or Next button to choose Alarm 1 to ON position, press Enter button to confirm.
The hours will flash, use the Prev or Next button to select hour. Press Enter button to confirm.
The mins will flash; use the Prev or Next button to select the minutes. Press Enter button to confirm.
The Vol digit will flash, use the Prev or Next button select the Volume. Press Enter button to confirm.
The Alarm source will flash, use the Prev or Next button select the Alarm source: Alarm/DAB/FM.
Press Enter button to confirm.
With the radio on, press the Alarm button twice to set Alarm 2:
The setting procedure is the same as the “ALARM1”.
NOTE: You can press the Info/Menu button to get back last one step when in the process of setting the alarm.
Warning: At location with poor DAB reception after power interruption time setting may not recover and for that wake, up by timer could fail.
Deactivate the alarm
With the radio on, press the Alarm button, and then select the alarm you wish to turn off using the Prev or Next button to choose the Alarm to OFF position.
Press Enter button. The alarm will be deactivated.
Turning off the alarm
Press the Standby button to turn off the alarm when the alarm is sounding.
NOTE: The alarm will keep ringing for 1 hour if you do not turn it off when it is sounding.
Snooze Function
When the alarm is sounding, press the Snooze button to turn off the alarm temporarily. The alarm will be delayed for 9 mins and then come on again.
Station information on DAB mode
Every time you press the Info/Menu button in the DAB mode, the display will cycle through the following display modes:
Dynamic Label Segment (DLS): Displays scrolling text information supplied by the broadcaster.
Signal Strength: Displays a signal bar with the current station strength.
Bit Error Rate (BER): Provides details of the signal error rate.
Channel Frequency: Displays the station’s transmission channel number and frequency.
Program Type (PTY): This shows the type and description of the program provided by the DAB+ station.
Time& Date: Displays the time and date information provided by the broadcaster.
Bit Rate: The data rate of which the signal is being transmitted.
Station information on FM mode
Every time you press the Info/Menu button in the FM mode, the display will cycle through the following display modes:
Radio Text: Displays scrolling test information supplied by the broadcaster.
Program type: Displays description of the program provided by the radio station.
Signal Strength: Displays a signal bar with the current station strength.
Time and Date: Displays the time and date information provided by the broadcaster.
Frquency: Displays the station’s transmission frequency.
Audio Type: Displays the audio type of the current station (Stereo or Mono).
Note: To switch between mono and stereo by pressing the Enter button repeatedly.

Returning your DAB+/FM Radio
You can retune your radio stations to store new stations or tune to a new region. Your preset stations will remain stored when you perform a full scan retune. In DAB mode:
Press and hold the Scan button to perform a full scan.
Progress will be indicated on the display.
When tuning is complete, the radio will play the first listed station or return to the last station played.
Using the Headphones
You can listen to your DAB+/FM radio using headphones, just plug the 3.5mm jack into the back of your device in the headphone jack. Control the volume by using the Vol+ or Vol-.
FAQs

Check that the DC power adaptor is properly connected to the DC in on the radio.
No sound| Check that the volume control is not at minimum setting.
Poor reception| Adjust the location of the antenna for the best signal reception.
Function disturbed| If none of the above solutions work, try unplugging your Radio.

Specifications

Shenzhen Adition Audio Science &Technology Co.Ltd
Model Identifier| AD1500502000EU-MICRO USB
Input voltage| 100-240V
Input AC frequency| 50/60Hz
Output voltage| 5,0V
Output current| 2,0A
Output Power| 10,0W
Average active efficiency| 79,85%
Efficiency at low load (10%)| 77,78%
No-load Power consumption| 0,06W

Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications, and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to a particular situation. No legal rights or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance to any applicable local laws of the requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking

Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements. The declaration of conformity may be consulted via techdoc@commaxxgroup.com

Service
For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>