SAFETY VISION 4816-NVR Mobile Digital Video Recorder Instructions
- June 6, 2024
- SAFETY VISION
Table of Contents
SAFETY VISION 4816-NVR Mobile Digital Video Recorder
Overview
4816-NVR is developed from the brand new platform N9M, which is an advanced and function-extensive Mobile Video Recorder specially designed for high definition IP camera input and excellent extension. It uses high-speed processor and embedded operating system, patented file system 5.0 to ensure the safety and integration of important data, combining with H. 264, H. 265 video compression/decompression technology, network technology and GPS locating technology. It can support 1080P,720P high definition and WD1, WHD1, WCIF, D1, HD1, CIF video recording and vehicle driving information recording, as well as wireless data upload. With the center software it also achieves alarm linkage central monitoring, remote management and playback analysis. It is powerful with modular design, flexible installation, easy maintenance and high reliability.
Main Features
- Supports 16 channel IPC (1080P)
- Modular design for easy maintenance
- Supports 2.5” or 3.5” hard disk storage and SD card for video recording
- With VGA port
- Internal GPS for location tracking
- Built-in WIFI for live view and video download, playback etc.
Specification
| Function Overview | Live view, Recording, Playback, Network, Locating |
|---|
System
| OS| Linux
Control Mode| CP4, Easy Check, Network (WIFI), Mouse
Video
| Input| 16 channel IPC (4K max.)
Output| 2 channels
Total Resource| 16 x 1080P@30fps
Audio| Input| 16 channels
Output| 2 channels (VGA, CP4)
Display
| Display Split| 1/4/9 Image display
OSD| GPS, alarm, acceleration, license plate number, speed, time, etc.
Operation Interface| Firmware GUI, Web UI
Recording
| Video/Audio Compression| Video: H.264, H.265
Audio: ADPCM, G.711A, G.711U
Image Resolution
| 4K(Max.),1080P, 720P, WD1(928X480), WHD1(928X240), WCIF(464X240),
D1(704×480), HD1(704×240), CIF(352×240)
Image Quality| 8 Levels adjustable
Recording Mode| Schedule/alarm (sensor, speed, acceleration trigger etc.)
Pre-recording| 0-60minutes
Post-recording| 0-30 minutes
Mirror Recording| Support
Playback
| Playback Channel| 4 channels by local playback
Search Mode| Date/time, channel, event
Network
| WIFI| 802.11 a/b/g/n/ac
Ethernet| RJ45 x 1 (10M/100M/1000M)
IPC Ethernet| RJ45(16x10M/100M, POE power supply)
Locating| GPS| Location tracking, speed detection and time sync.
Storage| Hard disk| Supports 3.5’’ 10TB (Max.), 2 x 2.5’’ hard disk or
SSD up to 4TB
---|---|---
Interface
| USB| USB2.0 x 2
SD| SD slot x 1
SIM| SIM slot x 1(Optional)
Sensor| 8 inputs, 2 outputs
Serial port| RS232 X 2, RS485 X 2
Speed| 1 channel pulse speed detection
Interface| Touch panel CP4 (Optional)
Intercommunication| I MIC interface
VGA| VGA x 1
Power
| Input| DC8-36V
Output| 5V@500mA, 12V@500mA
Max Power Consumption| 136W
Standby Power Consumption| ≈0W
Product Connection View
Physical Characteristic| Dimension (L × W × H)| 362.4x 254 x 127mm (With
the rear cover)
---|---|---
Environment
| Operating Temperature| -40℃- +50℃(With heater) or -5℃- +50℃ (Without
heater)
Operating Relative Humidity| 8%~90%
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>