SAFETY VISION 4112-HVR Mobile Digital Video Recorder Instructions
- June 6, 2024
- SAFETY VISION
Table of Contents
SAFETY VISION 4112-HVR Mobile Digital Video Recorder
Overview
4112-HVR is developed from the brand new platform N9M, which is an advanced and function-extensive Mobile Video Recorder specially designed for network high definition, analog audio & video input and excellent extension. It uses high-speed processor and embedded operating system, patented file system 5.0 to ensure the safety and integration of important data, combining with H. 265 video compression / decompression technology, network technology and GPS locating technology. It can realize AHD 1080P and 720P high definition, IP 1080P and 720P high definition, WD1, WHD1, WCIF, D1, HD1, CIF video recording and vehicle driving information recording, as well as wireless data upload. With center software it also achieves alarm linkage central monitoring, remote management and playback analysis. It is powerful with modular design, flexible installation, easy maintenance and high reliability.
Main Features
- Supports 8 channels AHD (1080P)+4 channel IPC (1080P)
- Modular design for easy maintenance
- Supports 2.5” 2TB hard disk storage and SD card for mirror recording
- With VGA port
- Internal GPS for location tracking
Specification
| Function Overview | Preview, Recording, Playback, Network, Locating |
|---|
System
| OS| Linux
Control Mode| CP4, Easy Check, Network (WIFI), Mouse
Video
| Input| 8 channels AHD (1080P)+4 channel IPC (1080P)
Output| 2 channels
Total Resource
| PAL: 81080P@12fps(AHD)+41080P@30fps(IPC)
or8720P@25fps(AHD)+41080P@30fps(IPC) NTSC: 81080P@12fps(AHD)+41080P@30fps(IPC)
8720P@30fps(AHD)+41080P@30fps(IPC)
Video Signal Standard| Electrical level: 1Vpp Impedance: 75Ω NTSC/PAL Optional
Audio
| Input| 12 channels
Output| 2 channels
Audio Signal Standard| Electrical level: 2Vpp Input impedance: 4.7kΩ
Display
| Display Split| 1/4/9 Image display
OSD| GPS information, alarm, temperature, acceleration, voltage, device
information, software version, MCU version, network status
Operation Interface| Semi-transparent GUI
Recording
|
Video/Audio Compression
| Video: H.265
Audio: ADPCM, G.711A, G.711U
Image Resolution
| PAL:
1080P, 720P, WD1(928X576), WHD1(928X288), WCIF(464X288), D1(704X576), HD1(704×288), CIF(352×288);
NTSC:
1080P, 720P, WD1(928X480), WHD1(928X240), WCIF(464X240), D1(704×480), HD1(704×240), CIF(352×240);
Digital: 720P(1280X720)
Image Quality| 8 Levels adjustable
Recording Mode| Schedule/Alarm(sensor trigger, speed, acceleration, video
loss, temperature)
Pre-recording| 0-60minutes
| Post-recording| 0-30 minutes
---|---|---
Mirror Recording| Yes
Playback
| Playback Channel| 4 channels by local playback
Search Mode| Date/time, channel, event
Network
| WIFI| 802.11b/g/n
Ethernet| RJ45 x 1 (10/100 M/1000M)
IPC Ethernet| 6-pin M12 (4×10/100M, PON power supply)
Locating| GPS| Location tracking, speed detection and time sync
Storage| Hard disk| Supports 2.5″ hard disk up to2TB
Interface
| USB| USB2.0 x 2
SD| SD slot x 1
SIM| SIM slot x 2
RS232| RS232 X 2
RS485| RS485 X 2
Sensor| 8 inputs, 2 outputs
Serial| G-sensor (Internal)
Speed| 1 channel pulse speed detection
Interface| Touch panel CP4 Optional
Intercommunication| I MIC interface
VGA| VGA x 1
Power
| Input| DC8-36V, ACC
Output| 5V@500mA, 12V@500mA
Max Power Consumption| 122W
Standby Power Consumption| ≈0W
**Product Connection View
**
Physical Characteristic| Dimension (L × W × H)| 302.7 x229 x 108.3
mm
---|---|---
Environment
| Operating Temperature| -40℃- +70℃(With heater) or -10℃- +70℃
Operating Relative Humidity| 8%~90%
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>