sauermann KT220 Class 220 Kistock Data Loggers User Guide
- June 6, 2024
- sauermann
Table of Contents
sauermann KT220 Class 220 Kistock Data Loggers User Guide
Display
-
END: DATASET is finished.
-
REC: Indicates that one value is being recorded.
It flashes: the DATASET did not start already. -
FULL: Flashing slowly: DATASET is between 80 and 90 % of the storage capacity.
Flashing quickly: DATASET is between 90 and 100 % of the storage capacity.
Constant: storage capacity full. -
BAT: Constant: indicates that the batteries have to be replaced.
-
1,2,3,4 : Indicates the channel number which is measuring.
-
ACT: Screen actualization of measured values.
-
MIN/MAX: The displayed values are the maximum/minimum values recorded for the channels displayed
-
: Indication of the direction of exceeding the threshold in the recorded measurement
-
°C : Temperature in °Celsius.
-
°F : Temperature in °Fahrenheit
-
%HR: Relative humidity (KH 220)
Dimensions (mm)
KT220, KH220
KTT220
*With all the thermocouple probes connected.
Connections
Recorder function
Five recording modes
KISTOCK can record in 5 different ways:
- ”Immediate” mode records values according to a predefined interval.
- ”Minimum”, ”Maximum” and ”Average” record automatically the calculation of minimum, maximum or average of measured values during an interval of recording. ”Monitoring” mode allows to get an accurate history report during error events to help troubleshooting, without stopping the measurement logging. To proceed this way, you just have to define :
- a record interval to be used whilst the readings are beyond the setpoints
- a record interval for the values measured during each reading beyond the setpoints
- Furthermore, you can also let your KISTOCK record non-stop (”loop” recording option).
Four types of dataset start:
Once your recording mode has been set, you can launch your dataset:
- With a delayed start (with predefined date and time)
- With the software
- With push-button
- With ”Online” option. In this case, your datasets are directly sent, saved and displayed on your PC in real time.
Six types of dataset stop
You can stop your dataset:
- According to a date and time (if it was started the same way)
- According to a period
- According to a predefined number of recording points
- Once the storage capacity is full
- With ”Stop” option of the software
- By holding ”OK” key during 5 seconds, if this function has been previously activated by the software
Mounting
The KT 220, KH 220 and KTT 220 KISTOCK have a magnetic mounting, so you can fix it easily.
Dimensions of the wall mount (mm)
Accessories
Please refer to the data sheet to get more information about available accessories.
Maintenance: please avoid any aggressive solvent. Please protect the device from any cleaning product containing formalin, that may be used for cleaning rooms or ducts.
Precautions for use: please always use the device in accordance with its intended use and within parameters described in the technical features in order not to compromise the protection ensured by the device.
| Reference | Parameters |
|---|---|
| KT 220 | Temperature, humidity, current, voltage, electrical pulses, liquid |
pressure
KH 220| Temperature, humidity (internal sensor, an additional external
humidity probe is available as an option), current, voltage, electrical
pulses, liquid pressure, light
KTT 220| Temperature
Operating temperature, protection of the instruments and information about storage and the battery
- Operating temperature*: KT220: from -40 to +70 °C; KH220, KTT220: from -20 to +70 °C
- KT220: IP65; KH220: IP20; KTT220: IP54*
- Storage temperature: from -40 to +85 °C
Battery power supply: 1x AA lithium 3.6 V battery
Website: www.sauermanngroup.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>