belluscura X-Plor 2 Portable Oxygen Concentrator Lightweight Unit Instructions
- June 6, 2024
- Belluscura
Table of Contents
belluscura X-Plor 2 Portable Oxygen Concentrator Lightweight
OverView
STEP 1 Placing X-PLO₂RTM in Backpack.
- Disconnect the cannula and remove the X-PLO₂R from the small carrying bag, if applicable.
- Place backpack on a flat surface with the front pocket and ring facing up.
- Pull-on ring to open the front pocket, so you can place the X-PLO₂R inside. (Be sure that the LCD screen is facing up, the cannula connector is located on the right side, and the intake vent aligns with the mesh panel.)
- Insert and thread the cannula through the opening at the top of the right shoulder strap.
- Continue threading the cannula down through the backpack, toward the X-PLO₂R. (Pull the cannula out through the grommet so it can connect to the X-PLO₂R.)
- Connect the cannula to the X-PLO₂R.
STEP 2 Wearing the BackPack. - Place backpack on shoulders and adjust the shoulder straps so the backpack is comfortable.
- Wrap the cannula up and over both ears and insert the nasal prongs into your nostrils. (The cannula should fit comfortably around your head.)
- Roll the cannula tubing to the desired length. Secure the excess tubing inside the backpack with the Velcro straps, making sure not to kink the tubing.
- Zip up the backpack and you’re ready to go X-PLO₂R. You can place additional batteries inside the backpack if desired.
American Medical Sales and Rentals
- Address: 15055 E. Hinsdale Drive, Bldg D Centennial, CO 80112
- Phone: +1 877-774-9271
- Web: www.oxygenconcentratorstore.com
- E-mail: sales@amsrco.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>