Kylin AU-K1022 Electric Multi Stew Cooker/Steamer 2.2L User Manual

Kylin AU-K1022 Electric Multi Stew Cooker/Steamer 2.2L

Please read this instruction carefully before using this product.

Safety Precautions

1. PLEASE READ ALL INSTRUCTIONS.
2.  Always use your appliance from a power outlet of the voltage (A.C. only)marked on the appliance
3. For your safety, use the power source with ground protection.
4. Do not touch the hot surface. Using handles or knobs.
5. To prevent from fire/electrical shock, do not immerse the cord, plugs, or appliance (state-specific part or parts in question) in water or other liquid.
6. Please place the appliance on a stable platform while using it. and keep it out of children.
7. Use extreme caution when opening the lid during or after cooking. Hot steam will escape and may cause scalding. And don’t put dishcloths or other things covering the vent.
8. When the product underworking, do not touch the hot items. Use the handles or knobs.
9. Do not put the inner pot on the fire and keep the heated ceramic pot away from cold water to avoid cracking.
10. 1f this product suffers from water shortage while used, please unplug the cord immediately. Do not use this product before cooling down and do not touch the heating base to avoid scalding.
11.  When using the small inner pot to stew food, the water level added into the stainless steel stewing cup container shall not exceed the waterline of” ee”: when using the inner pot to stew food, ,put some water into the stainless steel stewing cup container and shall not exceed the waterline of * before installing the inner pot, otherwise, there may be failure or danger.
12. Do not switch on the power when no water is in the stainless-steel stewing cup container. Unplug the cord after use.
13. When plugging in, please ensure it attaches well and holds firmly.
14. Do not let cord hang over edge of the table or counter, or touch hot surfaces.
15. Power plug and socket must be dried; do not unplug the power cord with wet hands to avoid electric shock.
16. The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
17. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off, then remove the plug from the wall Outlet
18. When this product is on, do not move it.
19. The ceramic pot and glass lid are fragile. Do not hit them with hard objects or drop them from height.
20. Close supervision is necessary when any appliance is used by or near children.
21. Please unplug when not in use or before cleaning. Wait for it cool down before putting on or taking off parts.
22. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions has been damaged in any manner. Bring it to the nearest authorized service facility for examination, repair, or adjustment.
23. The use of accessory attachments not recommended by the appliance manufacturer may cause damage.
24. Please do not use it outdoors(this item may be omitted if the product is specifically intended for outdoor use).
25. Do not place on or near a hot gas or electric burner, or in a heated oven.
26. Extreme caution when moving an appliance containing hot I liquids.
27. Do not use the appliance for other than intended use.
28. Please keep the instruction for future reference.

Performance and Characteristics

1. Selecting a high-quality ceramic inner pot to stew the food more nutritionally and healthy
2. Stewing food out of water, non-sticking, and preserving nutrients.
3. Twin ceramic inner pots are capable of stewing different dishes at the same time.
4.  Food-grade 304# stainless steel container it can be used to cook the food directly. It’s multifunctional.
5. Easy-to-use control panel with built-in Smart Programs, more powerful functions, and more professional cooking.
6. Preset/Timer function, delicious food is prepared when you’re home.
7. Certified with proven safety mechanisms.

Technical specifications

Parts Identification

Main components

 Functions

Description of Control Panel

1. Preset: Press it, “Preset” lights on, and the time “02:00” displays and blinks. The time can be set; press the key again, the “Preset” will off, the time will return to “00:00” and the machine comes into “standby” mode.
2. Hour: During the time setting, the H in “H: MM” increases from 0 to 9 by 1 each time you press the “hour” key. The “hour” increases by 1 if you short- Press the key and increases continuously one by one if you long-press. When the peak value 9 is reached, press the key again and it returns to 0.
3. Function: Press the key and the icon “A” will point to the first function (Set meal). At the same time, the default time is displayed. The time can be set when blinking; The icon “A” moves in a clockwise direction until the last function (heat presetting) shows up. Then press the key again, and the icon*A” returns to the first function. Long-press the key and the icon moves circularly in a clockwise direction.
4. Minute” key: During the time setting, the MM in “H: MM” increases from 00 to 55 by S every time you press the “hour” key. The “minute” increases by 5 if you short-press the key and experience a continuous increase by every 5 if you long-press the key. When the peak value 55 is reached, press the key again and it returns to 0.
5. cancel” key: Press the “Cancel” key, it stops working and returns to standby” mode, displaying “00:00”.

 Timer setting function

When you press the “Function” button to choose a function, the default time for the chosen function displays. You can change the time by pressing “hour” or “minute”. The stewpot goes into “work” mode automatically after a few seconds, and the function arrow starts blinking. When the water inside the stainless steel stewing cup is boiled for a while, begins to count down (backward in unit of I min). When the
process is finished, the buzzer rings and the stewpot enters to “Keep Warm” state. In this mode, the time displays”. – -“. The time can be adjusted in work” mode.

Preset function

1. Firstly, press the “Preset “button, the indicator for “Preset” 1lights on and blinks “02:00” when you press the for “Preset” key. You can set the time by pressing “hour” or “minute”. The maximum preset time is 9:55, namely, 9 hours and 55 minutes. If you press the Function” key to choose the function while the preset time is blinking. Then press the “Function” key to choose a function when the preset time figure is blinking. Meanwhile, it displays the default time of the chosen function. You can also choose time set by “hour” or “minute”. The stewpot will shift to “preset working” mode automatically a few seconds after set. It displays preset time and counts down by a unit of 1 minute. Adjustment of preset time is not allowed under the preset working state.
2. When the preset time is over, the stewpot enters the chosen function’s default time working state. When the water inside the stainless steel stewing cup container is boiled for a while, the timer begins to count down (backward in unit of I min). When the countdown is over, the buzzer rings and the stewpot enter to “Keep Warm” mode. In this mode, the time displays

Functions setting table

LCD Display in Working Condition
The following figure takes the default presetting time and defaults working time timing in the function package as examples to display the working interface

Steps
To collocate the inner pot according to the stewing method (The following methods are for the inner pot. The food and level shall not exceed 80% of the inner pot capacity. ):

• “Stewing “Method: Put food and an appropriate amount of water into the inner pot without a steamer rack (the water level shall be equal to or slightly higher than the food) and then put on the inner pot lid. Note: The small inner pot is only available for the “Stewing Method”.
• “Stewing without water “Method: Put the steamer rack inside the inner pot and then put food on the rack. Put on the inner pot lid. This method will make a small bowl of “original food juice”.
• “Stewing without water “Method: Put the steamer rack inside the inner pot and then put food on the rack. Put on the inner pot lid. This method will make a small bowl of “original food juice”.

1. Method of adding water into the stainless-steel stewing container Usc the inner pot to stew food: put the stainless-steel base plate into the stainless-steel stewing container, and add water into the stainless-steel stewing container to the waterline of “6”. Place the inner pot with materials in it onto the stainless-steel base plate, and then put on the glass lid.
2. Put the stainless-steel base plate into the stainless-steel stewing cup container, and add water into the stainless-steel stewing cup container to the waterline of ” “. Place two inner pots with materials in them onto the stainless-steel base plate, and then put on the glass lid.
3. The screen on the control panel lights on after the power is switched on. The stewpot is going to the “standby” state. Press the “Preset”, “Function”, “Hour” and “Minute” buttons to set preset time, function and time period.
4. If you think your food is done after a while of cooking, press the “Cancel “button,it will stop working and return to “standby” mode. The sereen displays “0:00
5. Unplug the cord after use.

Warm Tips

1. Set appropriate preset time according to different materials and life experiences. The time set for those easy-deteriorating food shall not be too long to prevent deterioration.
2. Adjust the cooking time under the working state according to your personal preference to make the food taste better.
3.  Please add water into the stainless-steel stewing cup container according to the water line on the stainless-steel stewing cup container, to ensure under-stewing, preventing product failure or danger.
4. To ensure the stewing efficacy, the default time for each function (excluding Keep Warm” and”Yogurt”) will be counted down after the water is boiled for a while. For example, the 2-hour default stewing time for “Cordyceps” means the stewpot will turn to a “Keep Warm” state upon 2 hours of stewing after the water is boiling for a while.
5. If you need to open the glass lid at the time of stewing, press the “Cancel” button to stop working first. Open the lid until the water stops boiling to avoid scalding injury.
6. In “Keep Warm” mode, it is unlimited and displays”- -i -“.Press the “Cancel” key if you want to stop “Keep Warm “mode.
7.  For making yogurt, clean and disinfect the inner pot with boiled water before use
8. The yogurt done shall be milky white or light yellow, evenly thick, free of bubbles and smell good; if not, this yogurt is contaminated and not suitable for serving. Freshly made yogurt may be served upon seasoning or put in the fridge. It tastes better after being cooled.
9. When the “Yogurt” and “Keep Warm” state stop working, it directly enters to “standby” mode.
10. When using the steam function, please add water to the lower surface of the stainless-steel base plate and use the plate to hold the food and then place them on the stainless-steel base plate, to ensure normal use.

Cleaning and Maintenance

Cleaning method

1. Before cleaning, the power cord should be unplugged, and wait for it cools down.
2. Use liquid detergent and a sponge to clean the ceramic pot and glass lid instead of a wire brush to avoid surface damage.
3. Clean the stainless-steel stewing cup container inside and outside with a wet towel. Do not clean it with corrosive liquid.
4. Note: Do not immerse the power cord and the main body in water to avoid product failure and danger.
5.  Storage methods: Please clean and pack it when it is out of use for a long time. It should be stored in a dry place.
6.  Do not disassemble or repair the machine by fan unprofessional personnel.
7.  If the power cord is damaged, it must be replaced with a special cord or a special component purchased from the supplier or the maintenance department of our company.
8. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Contact maintenance service for examination, repair or adjustment.
9. The ceramic pot and glass lid are fragile items, which are not covered by the warranty, please use them with caution.

12 MONTH WARRANTY

In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. In New Zealand, our goods come with guarantees that cannot be excluded under the Consumer Guarantees Act 1993.

So, as well as your statutory rights referred to above and any other rights and remedies you may have under any other laws relating to your Kylin product, we also provide you with a Kylin warranty. It’s important to note that this warranty is valid only in the country of purchase. Kylin guarantees this product against defects caused by faulty workmanship and materials for 12 months of domestic use ( or 3 months of commercial use) from the date of purchase. During this warranty period, Kylin will repair any defective product. If the product includes a number of accessories, only the defective part or accessory will be replaced. Kylin reserves the right to make minor adjustments instead of replacing the product or accessory. Packaging. instructions, recipes etc will also not be replaced unless faulty. In the event of a product or accessory being replaced during the warranty period, the warranty on the replacement product will expire 12 months from the purchase date of the original product, not 12 months from the date of the\ replacement.

To the extent permitted by law, this Kylin 12 months warranty excludes liability for consequential loss or any other loss or damage caused to the property or persons arising from any cause whatsoever. It also excludes defects caused by the product not being used by Instructions, accidental damage, misuse, or being tampered with by unauthorized persons, excludes breakables such as glass and ceramic items, consumable items and normal wear and tear and does not cover the cost of claiming under the warranty or transporting the goods to and from the place of purchase. Should you suspect your product may be defective and need some clarification or advice or you have any questions, ideas, or concerns, please contact us
directly on:

• Kylin Customer Service Australia +61(0)39998 0999
• If you’re certain your product is defective, and the product is covered by the terms of this warranty, you need to take the defective product back to the place you purchased it from, where the retailer will replace the product for you on our behalf. In this event, per the terms of this Kylin 12-month warranty, you will need to present this portion of the warranty page and the purchase receipt as proof of purchase so please make sure you keep both this page and your receipt on hand for the duration of the warranty period. And if for any reason you wish to contact us, please do so at:
• Kylin Customer Service Australia +61(0)39998 0999

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>