SENCI SIGMA 600 MID Portable Power Station User Manual

SENCI SIGMA 600 MID Portable Power Station

Improper use of the product may result in objects or personal injury.  Be sure to read this manual carefully and fully understand this product before use.
This newly designed solar generator SIGMA 600W uses high-quality lithium-ion batteries as the main body for energy storage. Compact size, light weight, large capacity, easy to carry, with built-in USB ports, DC and AC outputs, this unit can provide power solutions to you quickly and easily wherever you are in outages or outdoors. Please read this user manual carefully before using this unit. If you have any questions, please feel free to contact us.

• Use the charger provided to charge the unit and keep it works properly.
• Please read this manual before using this unit, check whether the product is in good condition and whether the accessories are complete.
• Product upgrades, appearance and screen printing will be adjusted locally without notice, please refer to the actual product.

WHATYOUGET

Safety Information

• Do not disassemble or modify this unit privately.
• Do not use or store this unit in a high temperature environment and avoid direct sunlight.
• Do not use or store this unit in a dusty or humid environment.
• Do not heat this unit or place it in fire, water or other liquid.
• Do not place the unit sideways or upside down while using or storing.
• Do not charge with a non-standard charger.
• It is normal for the charger to heat up when charging.
• Do not charge for a long time, and disconnect the charger as soon as it is fully charged.
• Do not touch the input and output ports of this unit.
• Only use the output outlets to power external devices.
• Check the unit before each use. Do not use it if it is damaged or broken. Keep this unit away from children and do not allow children to use this unit alone. If the unit is accidentally dropped or hit, turn it off immediately.
• Carefully read the instructions for the appliances you intend to connect with this unit.
• Please use this unit with caution to avoid the risk of electric shock.
• If rust, odor, overheating or other abnormalities are observed, discontinue use of this unit immediately and contact us.
• This unit meets the relevant requirements for the transport of dangerous goods.
• Please dispose of the scrap according to the regulations and classify them in time to avoid explosions and pollution.

Product Specifications

Basic Specifications

• Net weight: _ 7kg(15.43 lbs)
• Dimension:_ 279.4 x 193 x 181 mm(11 x 7.6 x 7.13inches)
• Battery Capacity: 160000mAh, 512Wh.
• Battery cycle life: 2000 times, remaining capacity:>80 (LiFePO4)

Output

• Wireless Charging :  15w

• DC 5521 Output x 2: 13.6V=5A, total BA.

• Car Outlet Output: 13.6V=8A
  (DC 5521 Output (2)+ Car Outlet Output: Total BA max.)

• Fast Charge Output x 2: 5V=2.5A, 9V=2A, 12V=2A(24W max.)

• USB-C 100W Output x2:5V/9V/12V/15V/20V=5A(100W max.)Total 200W.

• AC Output x 3: 120~ 60Hz, total 600W.

• Discharging Temperature:14 to 104°F (-10 to 40° C)

• Charging Temperature: 32 to 104° F (0 to 40° C)

Input

• PV Input: 18V-25V=15A max.
• AC Input: 100V~120Vac 50-60Hz, 400W max.
• Car Charger Input: 12V, 100W max.

Product Function

1. LCD display
   Display the power and usage status of the unit.

2. AC Recharging Input
   Insert the power cord connector into this port and then connect it to the mains.

3. Car/Solar input
   Support 4 (l00W) solar panels in parallel, and support 18-25V, 400W input; Support car max l00W.

4. DC output switch
   This button controls the product’s auto charge output and the DC output of the two DC output ports.

5. Car output

6. DC output
   This port is an output port, so input charging is prohibited.

7. USB-C 1 00W output

8. FAST CHARGE output

9. Power switch
   Click the power button to turn on the product, turn on the USB output port and top wireless charging.
   Double click the power button to enter ECO mode.
   Long press the power button to turn off.

10. 120V AC output
    Charge a device with a voltage requirement of 120V. (Do not support all excess appliances, the power of the power of the powered device should be less than 600W).

11. AC output switch
    This button controls the AC outputs, turn off this switch when not in use.

12. LED light
    The LED light has five modes, including: three brightness adjustments (25%,50%, 100%),SOS mode and pop mode.

13. LED light button
    Choose the mode of the LED light.

14. Wireless charging
    It supports 15Wwireless charging function.

15. Colling fan
    Colling fan prevent the unit from overheating. Be careful not to obstruct the heat dissipation holes.

Smart LCD Display Screen

1. lnput current
   Display the current input power of the unit in watts in real time.

2. Battery level indicator
   Display the remaining battery, and the icon rotates when charging and discharging.

3. Battery charge percentage
   Display the percentage of remaining battery, and when the remaining battery is less than5%, charge it.

4. Output Current
   Display the current output power of the unit in watts in real time.

5. Remaining charge/discharge time
   The remaining charging/discharging time is based on the current power consumption of the unit.

6. Sleep icon
   When the unit goes sleep mode, the sleep icon appears on the screen.

7. Temperature protection
   When the unit temperature is too high or too low, a temperature protection warning icon appears on the screen.

8. warning
   When the unit output is abnormal, alert icon appears on the screen.

9. Pure sine wave
   When the AC output is used, pure sine wave AC output icon appears on the screen.

10. AC output icon
    When the AC output port is in use, the AC output icon appears on the screen.

11. DC output icon
    When the DC output port is in use, the DC output icon appears on the screen.

12. USB output icon
    When the USB output port is in use, the USB output icon appears on the screen.

13. Frequency Display Icon
    When the frequency displaysS0/60 Hz, it indicates the current frequency status.

Recharging Ways
Example 1:

Example 3:

How to Use

Example 1:

Example 2:

Example 3:

Tips for Use

• This unit has built-in high-quality LiFePo4 batteries, large capacity, long-lasting and durable. We recommend that you use it in the range of 5 to 35°C environment.
• If you do not use this unit for a long time, check that all switches are off.
• In order to extend the life span of this unit (LiFePo4 battery), it is recommended to charge once in every 3 months, at least once in every 6 months, to prevent the battery from losing power.
• During the use of this unit, do not block the fan exhaust. This unit integrates overload, overheating, short circuit, over voltage, under voltage and other safety protection technologies, after troubleshooting, turn off the power switch and reopen it to reset the power supply to work again, if the reopening switch is invalid, you need to connect to the charger to charge 5s to wake up the battery, the unit can work normally.
• The LED illumination can be adjusted to five modes 25%,50%, 100% brightness, SOS mode, and flashing mode. Every time it can be adjusted by clicking the light button repeatedly with 1 S interval.

Recycling
Please send the used electronics, batteries and packaging materials to the recycle bin especially for lithium batteries. This can help with waste disposal and promote material
recycling, to protect environment!

Battery Information
This unit has built in high quality LiFePO4 batteries. Do not disassemble the unit and remove the battery privately in case of destroying the unit. Batteries can be charged and
discharged hundreds of times or more.

Statement
Please be aware that this manual is only for this unit MID 600W and does not represent the manual for others. In addition, this manual is provided as a guide only, the pictures in this manual are for reference only, and all statements, information and suggestions in this manual do not constitute any express or implied warranty. We are always dedicate to the improvement of product itself, therefore, the appearance and performance of units may be slightly different from this manual, please understand.

Potential Failure Analysis

1. Why is the LCD screen not lit up during charging operation?
   Analysis: Once no operation for a long time, the LCD display will enter the energy-saving
   mode: turn off the display backlight board, adjust the display brightness. It may cause the illusion that the display is closed.
   Solution: Tap the power/AC/DC switch to wake up the display.

2. Why does the charger heat up while charging?
   Analysis: When the charger is in a room temperature environment, the surface temperature should be lower than 70°C , if the charger temperature is lower than 70°C , it
   is normal, if it is higher than 70°C , it may be a charger malfunction, except for extreme environments such as high temperature.
   Solution: Charge at 0-40°C or replace with a new charger with the same specification.

3. Why does the appliance not work when plug into AC port?
   Analysis: This unit can only support appliances within 600W, to check if the loaded appliances exceed the rated output power, if so, it will trigger overload protection.
   Solution: Remove the load appliance, turn on the switch again, and the unit can be used normally.

4. Why is the output suddenly stopped during the use of this unit in high temperature?
   Analysis: ln extreme environment with high temperatures, overheating protection may occur in use.
   Solution: Turn off the unit, after its automatic cooling, turn on the switch, it can be used normally. It is recommended to work below 40°C.

FCC Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or
television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement, This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>