belluscura X-PLOR 4 Portable Oxygen Concentrator User Guide

belluscura X-PLOR 4 Portable Oxygen Concentrator User

Product Specifications

• X-PLOR Unit
• Carrying Bag with Handle and Shoulder Strap
• Replaceable Cartridge (Initial cartridge inserted in unit, additional cartridges shipped in Mylar bag)
• AC Power Supply
• DC Power Supply
• 8-Cell Battery
• Nasal Cannula (may be included in the package)

Product Usage Instructions

Quick Start Guide

1. DO NOT TURN ON THE X-PLOR UNTIL YOU REACH STEP 4.
2. It is quick and easy to get your X-PLOR started, but please read the entire User Manual before using.
3. Battery: VERIFY CARTRIDGE IS INSERTED
4. Release Latch: INSERT INTO BAG & ATTACH THE BATTERY
5. CHARGE THE BATTERY: Press POWER Button
6. Adjust flow level using UP/DOWN Arrows as specified in your oxygen prescription.

The X-PLOR lets you travel with ease. It’s perfect for carrying on buses, trains, planes, and cruise ships! Now with X-PLOR supplemental oxygen and direct-charge batteries, exploring has never been so easy

Nasal Cannula Usage

Attach the Nasal Cannula to the X-PLOR device and enjoy the improved mobility it provides.

CHECKLIST

Locate the following items in your X-PLOR® box to get started:

START GUIDE

VERIFY CARTRIDGE IS INSERTED

• Ensure the cartridge is inserted all the way into the unit so the handle lays flat.

DO NOT TURN ON THE X-PLOR UNTIL YOU REACH STEP 4

It is quick and easy to get your X-PLOR started, but please read the entire User Manual before using.

DO NOT TURN ON THE X-PLOR UNTIL YOU REACH STEP 4.

It is quick and easy to get your X-PLOR started, but please read the entire User Manual before using.

INSERT INTO BAG & ATTACH THE BATTERY

• Insert your X-PLOR into the carry bag. When the X-PLOR is correctly inserted into the bag, the LCD screen is seen through the plastic window and the air intake and exhaust are aligned with mesh panels.
• To attach the battery, slide it on until the latch is in the locked position and zip the bag close.

CHARGE THE BATTERY

• Place in a well-ventilated area to fully charge the battery before using your X-PLOR, which can take up to 6 hours for the 8-cell battery.
• To charge, insert the AC power connector into the battery’s power receptacle and the other end into an electrical outlet.

TURN ON & SET THE OXYGEN FLOW 

Press the POWER button for 2 seconds to turn on your X-PLOR.

• * When powered on, position the unit upright to warm up (Warm-up time is less than 2 minutes.)

• Use the UP/DOWN ARROWS to set the oxygen flow level, as specified in your oxygen prescription.

NASAL CANNULA

• A nasal cannula MAY be included.
• Connect the nasal cannula to the oxygen output nozzle located on top of the X-PLOR.
• Place the other end in your nostrils. Oxygen will be delivered through the nasal cannula with each breath.
• Remember to breathe through your nose as normal.

GO X-PLOR!

• Attach the shoulder strap and handle to your X-PLOR device and enjoy your newfound mobility!

X-PLOR IS FAA COMPLIANT.

• XPLORoxygen.com
• (877)-GO-XPLOR

©2023 Belluscura LLC. All Rights Reserved.

FAQS

Is the X-PLOR FAA complain

Yes, the X-PLOR is FAA compliant.

What should I do before turning on the X-PLOR

Make sure to verify that the cartridge is inserted correctly before turning on the X-PLOR.

How can I adjust the oxygen flow level

Use the UP/DOWN arrows on the device to adjust the flow level according to your oxygen prescription

How can I charge the X-PLOR battery

Simply press the POWER button to charge the battery.

Where can I find more information or support for the X-PLOR

Visit XPLORoxygen.com or contact (877)-GO-XPLOR for more information and support.

References

• Belluscura | Portable Oxygen Concentrator Manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>