Skullcandy S2GTW-P749 Grind True Wireless Earbuds User Manual

EVERY DAY, DO-IT-AL.

100%recyclable packaging emballage recyclable

True Wireless Earbuds

|

Smart Feature Technology™

---|---
| Hours Total Battery
---|---
| Hands-Free Voice Control ;
| Sweat/Water Resistant
| Update Features with Skullcandy App
| Find Your Earbuds

ONE TOUCH TO UNE TOUCHE POUR Spotify

Smart Feature Technology™

• Hands-Free Voice Control
• Share Audio
• Customize Button Functions
• One Touch or Voice Control to Start Spotify
• Add new features as they become available through the Skullcandy App

SIMPLIFY YOUR LISTENING®

• Auto On/Connect
• Call, Track, Volume Controls
• Use Either Bud Solo
• Rapid Charge: 10 min = 2 hrs

SUPREME SOUND™

• Premium Audio Quality
• Custom EQ Modes
• Dual Noise Reducing Microphones

FEARLESS USE™

• Teeeto me) (ct (9AM Ae clme(occatclal
• Tile™ Finding Technology
• Replacement Policy

Let’s get starte

Take the earbuds out of the charging case and remove the protective stickers from the charging points.

1. Place the earbuds in the charging case and leave the lid open. The LEDs will illuminate.
2. Open Bluetooth settings on your device. Select Grind from the list of available devices.
3. Accept any PAIR or OK prompts. Your earbuds will connect to your device. They are now ready to use.

Download the App
https://qrstud.io/jtfq2ky
Personalize your earbuds through the Skullcandy App.
Enable voice commands, configure settings, access user guides and update new features when they become available.

Controls

Tip : Download the Skullcandy App for easy, always-on access to this list and additional features.

  Power On / Off
Remove the earbuds from the case to power ON and connect. Place the earbuds in the case and close the lid to power the earbuds OFF and charge.| “Hey Skullcandy…”
With the Skullcandy App, you can enjoy hands-free control of your favorite media player and other functions using just your voice.

Press 1 Time

| Play/Pause| Either Earbud
---|---|---
| Answer/End| Call Either Earbud

Press 2 Times

| Volume Up| Right Earbud
---|---|---
| Volume Down| Left Earbud

Press and Hold
To Launch and Play Spotify

Share Audio Between Two Skullcandy
Skull-iQ Enabled Product

Press Once, Release.
Press Again & Hold

If Spotify is your preferred media player, just say…

“Hey Skullcandy, Spotify”

Spotify / Media Player Commands

| “Hey Skullcandy, Play”
---|---
| “Hey Skullcandy, Pause”
| “Hey Skullcandy, Next”
| “Hey Skullcandy, Previous”
| “Hey Skullcandy, Volume Up”
| “Hey Skullcandy, Volume Down”

Call Mode Commands

| “Accept”
---|---
| “Reject”

Having trouble?

Don’t return to store.
Let us help.
For product support, download the app or visit Skullcandy.com/Support/G

No audio in one earbud?
Let’s re-sync your earbuds. Place them in the charging case and close the lid for 2 seconds. When removed, both earbuds should play audio. If not, return the earbuds to the case and follow the steps below.

1. On your device, open Bluetooth settings and turn Bluetooth OFF.
2. Remove both earbuds from the charging case. Make sure they are both powered ON.
3. Press the button on both earbuds 3 times simultaneously. The LED will go through a series of pulses as they re-sync. 5 blue flashes indicate a successful sync.
4. On your device, open Bluetooth settings and turn Bluetooth ON and select “Grind”.
5. LEDs in both earbuds will blink blue 3 times.
   A voice prompt will indicate when the earbuds are connected.

Resetting your earbuds to resolve pairing issues.

1. On your device, open your Bluetooth settings and remove “Grind” from your paired devices list. Then turn Bluetooth OFF.

2. Remove both earbuds from the case.
   A voice prompt will indicate that your earbuds are powered ON.

3. Press and hold the button simultaneously on both earbuds for 3 seconds.

4. Both earbuds will flash purple 3 times. A tone will indicate a successful reset.

5. On your device, open Bluetooth settings and turn Bluetooth ON.
   Select “Grind” and accept any PAIR or OK prompts to complete pairing.

Like your new earbuds?
Please leave a review at your retailer’s web site or Skullcandy.com

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Safety information inside. Made in Vietnam. Skullcandy, and other marks are registered trademarks of Skullcandy. Inc. All rights reserved. The Bluetooth® word mark and eacs are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Skullcandy, Inc. is under license. Contains Li-ion battery. Battery must be recycled or disposed of properly.

Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its complance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance. iPad. iPad Air, iPad Pro. iPhone, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.)

R-C-Sku-S2GTW

Grind: Irve Blac
MODEL: S2GTW
FCC ID: Y22-S2GTW
IC: 1D48EA-S2G IW| Americas rope
Skullcandy, Inc
6301 N Landmark Dr.
Park City, UT 84098
USA.
Skullcandy.com| Europe
Skullcandy Europe BV
Postbus 425
5S500AK Veldhoven
Nederland
Skullcandy.eu
---|---|---

© 2021 Skullcandy, Inc.
Skullcandy.conypatent-information

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>