BODEGA TWW35, 45, 55 DC 12V, 24V AC100 to 240V Car Fridge Instruction Manual

BODEGA TWW35, 45, 55 DC 12V, 24V AC100 to 240V Car Fridge

Safety Instruction

Features

• High-efficiency DC compressor and conversion module with high-quality, long working life and fast cooling performance.
• 100% CFC & HFC free insulation with good heat preservation performance and low energy consumption.
• DC12V/24V or AC100V to 240V (with Adaptor)
• Fast cooling to -20°C(with ambient temperature at 25°C)
• Intelligent car battery protection system
• Telescoping handle and wheels for easy outdoor use
• Dual fridge and freezer zone design with ample capacity
• The installation of DC power source in the boat must be handled by qualified electricians.
• Make sure to connect power to the suitable voltage socket anytime.
• No electrical devices used inside the refrigerator.
• The refrigerator can be powered on only after being unpacked and put on the floor for more than six hours.
• Make sure to keep the refrigerator horizontal when it is running. The tilt angle must be less than 5° for long time running and that must be less than 45° for short running.
• Good ventilation: it must be well ventilated around the refrigerator, so there should be some space around it. Back space: 200mm Side space: 100mm
• Avoiding heat source: the refrigerator should be placed in a well-ventilated place, away from heat source and try to avoid direct sunlight.
• Keep it stable: Put the refrigerator on the floor or in the car
• When there is water inside the tank, do not turn the refrigerator upside down to pour water. Dry the rain on it and do not soak the tank in the water.
• Please do not put metal such as hairpin or wire in the air inlet vent, outlet vent and gap.
• Do not connect with other power except DC 12V/24V and AC 100V/24OV.
• Do not soak the refrigerator in the water or wash it by water.
• The product cannot be repaired by other person other than the company’s maintenance personnel. If malfunction happens, please contact with our company for consultation.
• Cut off the refrigerator before cleaning to avoid electric shock.
• Keep away froom watery places or humidity to avoid leakage or shock.

Operating Description

• Power supply: DC 12V/24V or AC 100V-240V (With adaptor)
• DC power supply (Voltage must be 12V if there is built-in battery inside the refrigerator)

Operation Method:

• Press the button to switch it ON, and long press the button for three seconds to switch it OFF.
• Press + or- for the temperature setting.
• Press+ or-, when the screen flashes, press to switch left/right zone.
• Icons under the screen: Left Zone; Right Zone
• Press+ at the same time for three seconds to switch on/off the left zone.
• Press- at the same time for three seconds to switch on/off the right zone.
• Press the setting and choose ECO(Energy-saving) or MAX (Fast cooling). The factory setting is MAX.
• Long press for three seconds. When H flashes on the screen, select three battery protection modes H(High), M(Middle), and L(Low) by pressing the setting button again. The factory setting is H.
• APP type: Press the setting button after AP is displayed on the panel when connecting with the APP by Bluetooth.
• Turn off the fridge then long press the SET button until displays El, press the SET button until displays E5, and press+or- to select Celsius or Fahrenheit.

Operating Panel& APP

• The USB port is not equipped for all modes.
• The built-in battery is equipped for internal battery type.
• APP control is not equipped for all modes.
• Product features are subject to real purchase.

APP Connecting Operation: Please scan the corresponding QR code shown below to download the APP “Car Fridge Freezer from App Store or Google Play, then open the Bluetooth and the downloaded APP to search the fridge equipment, you will hear a Tick sound, meanwhile there will be “AP” shown on the fridge display panel. Press the setting button on the fridge to connect your mobile. By connecting the smart car refrigerator through the APP, you can check the temperature of the refrigerator, voltage and other information, as well as setting the temperature and cooling mode, etc.

Components Detail

Instruction when refrigerator used in car
The refrigerator has a three-level battery protection function, which not only guarantees the normal operation of the refrigerator but also protects the battery of the vehicle. When in the power-on state, long press the SET button for 3 seconds and the display screen flashes H. Select low voltage protection L(low), M (medium) and H (high) by clicking SET button. The factory defaults to H (high) protection.

H should be set when the refrigerator is connected to car power and M or L should be set when it is connected to a portable battery or other backup battery. Because of the different output voltage between different vehicles, the battery gear can be set from H to M or from M to L if there is a voltage protection code F1 shown on the panel. The battery gear should be set to H if the refrigerator should keep working after turning off the car engine, or there will be a possibility that the car battery is used excessively and the vehicle cannot be restarted.

Cleaning and Maintenance

Cleaning:

1. Please unplug the fridge first to avoid electric shock.
2. Do not soak the fridge in water and do not wash it.
3. Remove the cover and drain from the hole.
4. Use wet cloth to clean the fridge and dry it.

If you do not use the refrigerator fora long time, please follow the instruction:

1. Turn off the power and remove the plug.
2. Remove the items stored in the refrigerator.
3. Absorb all the water in fridge with dry cloth.
4. Place the fridge in a cool and dry place.

Troubleshooting

The device meets the requirements of Regulation 2014/30/EU as well as the applicable standards EN55014-1:2017, EN55014-2:2015, EN61000-3-2:2014, EN61000-3-3:2013. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Manufacturer:
Foshan Alpicool Electric Appliance Co., Ltd.
Add.: 13A Xinlong Road, Shilong.Jiyue Industrial Zone, Xintang Village,
Lunjiao Town, Shunde District, Foshan City, Guangdong, China

Name: APEX CE SPECIALISTS LIMITED
Add.:UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS
PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
LUCID-Reg-Nr.DE3887611146006
WEEE-Reg.-Nr.DE 16152671

WARRANTY CARD

Dear customer,
Thank you for purchasing our BODEGA products, which has been made to meet high-quality standards. The manufacturer’s warranty covers the product against manufacturing defects fora period of 24 months from the date of purchase. All BODEGA warranties are automatically kept tracking in our system, so there is no need to register your product. For an extra 6-month free-of-charge warranty, please register at the website www.bodegacooler.com or fill in the following Warranty Card, take a picture and send to info@bodegacooler.com if you have any problems during using process, please contact us via info@bodegacooler.com. We will reply you within 24 hours and provide you the technical support.We do make every effort to ensure you are 100% satisfied.

Please fill in the table and email it within 10 days from the date of purchase.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>