C-SMARTLINK WA0105 3 In 1 Travel Wireless Charger User Manual

3-in-1 Travel
Wireless Charger
User Guide WA0105

Package Contents

Product Diagram

1. Phone Wireless Charging Position
2. Indicator Lamp
3. Back Supported Bracket
4. Power Interface
5. Watch Wireless Charging Position( 90° Foldable )
6. Earbuds(Case) Wireless Charging Position
7. Silicone Strips Adhesion Area

Tips:
Please Use the Provided Adhesive Tape to Stick the Silicone Strip for Vertical Usage or Use without Silicone Strip for Flat Usage as You Like.

How to Use

Vertical Usage Step1: Open the Charger and Please Use the Provided Adhesive Tape to Stick the Silicone Strip.Step2: Open the Back Vertical Bracket for Stable Support.Step3: Connect One End of the USB-C Cable to Product Power Interface, the Other End to the Power Supply.
Step4: Place the Devices that Needs to be Charged in the Corresponding Position for Charging.

Flat Usage Step1: Open the Charger and Please Use the Provided Adhesive Tape to Stick the Silicone Strip.
Note: You can use without silicone strip for flat usage as you like.Step 2: Please Fold the Bracelet Charging Area up 90 Degrees.Step3: Connect One End of the USB-C Cable to Product Power Interface, the Other End to the Power Supply.
Step4: Place the Devices that Needs to be Charged in the Corresponding Position for Charging.

Specifications

Earbuds: 5W
Watch: 3W
Transmission Distance(Except Watch)| ≤ 4mm
Charging Offset Distance(Except Watch)| ≤ 5mm

Indicator Status

Note: The Charging Indicator Light is Only Applicable To the Phone Charging Area.

Compatible Devices

iPhone 13mini/ 13/ 13Pro/ 13Pro Max
iPhone 12mini/ 12/ 12Pro/ 12Pro Max etc.
Smart Watch| iWatch 2/ 3/ 4/ 5/ 6/ 7/ 8/ SE/ SE2/ 8 Ultra etc.
Earbuds| Airpods 2/ Airpods 3/ Airpods Pro/ AirPods Pro2 etc.

Cautions

1. Pls use the power supply voltage as specified (AC 100-240V).
2. Please use a mobile phone case with a thickness of less than 4MM.
3. If you need to clean the charger, please make sure it is not connected power supply.
4. Applies to iphone 12 series and above mobile phones perfectly.
5. Wireless foldable charging supports a maximum output of 15W for mobile phones and 7.5W for iphone phones.
6. Due to the magnetic attraction, there may be imprints in the joint area of wireless charger, which can be wiped off with an alcohol cotton pad.
7. It is recommended that uses with the included power adapter and USB-C charging cable for better charging performance.
8. Do not disassemble, repair, modify on your own and do not drop this product.
9. Do not use or store this product in highly humid or moist places, direct sunlight, dense dust, or in high temperatures such as in a car under the sun or near a heater.
10. This product is for indoor use only.
11. Keep out of reach of children.
12. If any abnormality like smoking, odor, deformation, etc. occurs in this product, stop using it immediately.

Trouble Shooting

If you’re experiencing interrupted or slow charging, check the following:

1. The back of your phone should not have any metal, pop sockets, or credit cards.
2. If you’re using an iphone 12 or below version or a other branded phone, please put the phone in the center of the charging surface (this lets the charging coil in your phone line up with the one inside the wireless charger).
3. Phone cases should be no thicker than 4mm for effective charging.
4. Check whether the adapter is QC3.0/ PD3.0 fast charger.

If you are using the recommended wireless charger with the QC3.0/ PD3.0 adapter and have removed any potential charging obstructions, but are still experiencing issues, please try following steps:

1. Replacing the cable connecting to your wireless charger.
2. Unplug the adapter and reinsert it.
3. Please feel free to contact our support team for solving problem.

FCC Compliance

Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
RF exposure:
The device has been evaluated to meet general RF exposure requirement.

WEEE Compliance

DO not to dispose of product as unsorted municipal waste and to collect such WEEE separately, for proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Please contact your local authority for further details of your nearest designated collection station.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>