BODEGA TWW75 12 Volt Car Refrigerator User Manual
- June 5, 2024
- BODEGA
Table of Contents
User Manual
CAR FRIDGE
TWW75 DC 12V/24V AC100-240V
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY RETAIN THIS MANUAL FOR FUTURE REFERENCE
Quick Guidelines
This icon marks references to other pages in this manual.
First Step: connect with 12/24V DC or 100-240V AC (with adapter) power.
Second Step: press” ” to switch ON, long press” ” for 3 seconds to switch OFF.
Third Step: press ” + ” or ” —” to adjust the temperature. ( 6)
Cooling Mode: press “ ” to switch cooling mode between MAX (fast cooling)
and ECO (Economical).
ECO | MAX |
---|---|
(Economical mode) | (Fast cooling mode) |
Battery Protection Mode: hold “0” over 3 seconds until the screen
flashes, then press
Protection Mode: hold “ ” over 3 seconds until the screen flashes, then
press “0” again to select battery protection mode.( 6)
H | M | L |
---|---|---|
(High) | (Medium) | (Low) |
Temperature Unit Setting: the default setting is centigrade °C. If you want to change to Fa hren heit°F, please refer to ID 6
|
---|---
Safety Instructions
To prevent damage to your product or injury to yourself or to others, read the
following safety precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the product will read
them.
This icon marks warnings. Failure to obey these warnings could result in a
malfunction of your fridge and possible injury for yourself and other users.
- Do not expose your fridge to heat and direct sunlight.
- Do not place in humid places to avoid leakage or electric shock.
- Do not put any electrical devices inside the fridge as they could damage the fridge.
- Do not soak the fridge into water or expose it to rain.
- Do not upside down for drainage
- Do not block the gaps of the fridge with things like pin, wires, etc.
- Do not allow children to play on or in the fridge.
- Do not use the fridge if abnormalities are noticed such as smoke, overheating, leakage etc.
- Do not let other technicians to repair the malfunctioning fridge, except the staff from our company.
Notices
- Use wet cloth to clean your fridge before use.
- Make sure the voltage is within the proper range for the socket and cable being used.
- The fridge should be unpacked and stand still for more than 6 hours before switching on the power
- Make sure the refrigerator stays horizontally when it is working. The tilt angle should be less than 5° in long run and be less than 45° in the short run.
- The fridge needs some space for good ventilation to work properly, at lease 200mm at the back and 100mm at side.
- The installation of the DC power source in a boat should be handled by a qualified technician.
- Please contact us for maintenance if your fridge gets malfunctioned.
Product Features
- High-efficiency DC compressor and module which is robust and durable.
- Fast cooling to -20°C/-4° F (based on 25°C/77° F room temperature).
- 3-stage low voltage battery protection.
- CFC-free and low energy consumption.
- DC12V/24V or AC 100-240V (with adapter) power supply.
- Robust wheels and stretchable handle
- Invertible door for installation
- Dual-zone for cooling and freezing.
- LED display for temperature setting.
- APP control via Bluetooth
Product Structure
Function and Setting
-
Display Screen Initialization: Connecting with electricity, the buzzer rings and the display screen lights up for 2 seconds, being into normal operation mode.
-
Power Supply: Can be connected with DC 12/24V or AC 100-240V(with adapter).
-
Power On/Off press to switch ON, long press for three seconds to switch OFF.
-
Temperature Setting: under the running state, long press+ and at the same time for three seconds to switch ON/OFF the left compartment, long press — and at the same time for three seconds to switch ON/OFF the right compartment, two compartments cannot be switched off at the same time. When both left and right compartments are set in running state, press
**+ or —**
to enter left compartment temperature setting, press+ to increase temperature, press — to decrease the temperature, and press 0 to switch left/right compartment. The setting will be saved after stop operating for four seconds(Note: the temperature displayed is the current temperature of the compartments, it’ It takes a while to reach the set temperature.) Temperature setting range: -20-20°C (-4-68°F) -
Cooling Mode Control: Press the button to select cooling mode. You can switch mode between MAX (Quick cooling mode} and ECO (Economical mode).
-
Battery Protection Mode: Hold the button for over 3 seconds, the screen will flash, then you can select L(Low), M (Medium), H (High) mode for your battery protection. The default setting is H mode. When the fridge is powered by car battery, it is recommended to set H mode. When the fridge is powered by a built-in battery or portable battery, it is advised to set M or L protection mode. The reason is that various cars have different output voltages. If battery protection occurs (screen displays Fl), the protection mode should be adjusted from H to M or L. When the engine is switched off, the fridge is still able to work. Protection mode should be set to H to prevent car battery from exhaustion.
-
Temperature Unit Setting: press to switch off the fridge, then press over 3 seconds until El shows on the screen. Press from El, E2 switching to E5. When the screen flashes, press + or — to change the unit between Centigrade (°C) and Fahrenheit (°F).
-
Reset Power off the fridge, holding the setting button until El is displayed on the screen. Hold the button + and — until the screen lights up as follow:
Download the “QZsmart” APP
Scan the QR Code below with your smartphone or search it in the APP Store or Google Play to download the “QZsmart” app.
https://a.smart321.com/qzsmart
NOTE: Allow the app to access network, location and Bluetooth services
for best use. Create New Account *Open the “QZsmart” app, press “Sign UP”,
then sign with your account details on the app.
Add Device
- From the Home Page, press “Add Device” or press “+” in the top right corner of the screen. (If you already have a device added to your account, the “Add Device” button will not appear.)
- Connecting
■ Auto-connect: The app will automatically search when Wi-Fi and Bluetooth are switched on, so you can add the corresponding product directly from the automatic search. – Press “Add”. – Select your Wi-Fi network. – Enter your router password.
■ Manual connection: Select your model from the device menu. – Select your Wi- Fi network. – Enter your router password.
NOTE: Connection may take up to 60 seconds. Once the device is added,
you can use the menu of the app to change the name of the device. When you
finished, press “Done”.
NOTE: Your mobile device is connected to a 2.4GHz Wi-Fi network when
pairing with the app. Please select the 2.4GHz network when selecting a Wi-Fi
network on the app during setup.
Using the My App
The main interface can control the temperature of 2 compartments respectively;
Set up the “LOCK”; Refrigerator switch. Click on “more features” in the lower
right corner to set the switch of temperature unit, cooling mode, battery
protection mode and refrigerator compartment.
How to unbind
A car refrigerator can only be connected to one mobile phone. You can
disconnect the connection by turning off the switch of the refrigerator and
simultaneously long pressing + and – on the control panel of the refrigerator
for 3 seconds and hearing one beep.
Cautions ‘
There will be a delay in operating the machine on the mobile phone, about 1-3
minutes, please be patient. ‘The language of the APP automatically switches
with the language of the mobile system. ‘You can lock or unlock the control
panel on the refrigerator by operating the APP lock icon. Please note that if
you want to lock the refrigerator, please control it through the APP, the
operation panel of the refrigerator does not have the function of locking and
unlocking.
Cleaning and Storage
-
Cleaning:
1. Please unplug the fridge first to avoid electric shock.
2. Do not soak the fridge in water and do not wash it.
3. Remove the cover and drain from the hole.
4.Use wet cloth to clean the fridge and dry it.
-
If you do not use the refrigerator for a long time, please follow the instruction:
1. Turn off the power and remove the plug.
2. Remove the items stored in the refrigerator.
3. Absorb all the water in fridge with dry cloth.
4. Place the fridge in a cool and dry place.
Troubleshooting
PROBLEM | POSSIBLE CAUSE | SUGGESTED SOLUTIONS |
---|---|---|
The refrigerator is not working | The power is cut off | •Check if power supply |
is
malfunctioned or not.
•Check whether the plug and socket are connected well.
•Check whether the fuse has been burnt or not.
•Check if the switch is on or not.
Food is frozen| The setting temperature is too low| Increase the setting
temperature
Water flowing sound is inside the refrigerator| It is a normal phenomenon.| It
is the flowing sound of refrigerant which is normal.
There are water drop around the refrigerator casing or door gap| It is a
normal
phenomenon.| When moisture in the air meets the lower temperature refrigerator
casing, it will naturally become liquefied and condensed to be water drops.
That is a normal phenomenon.
The compressor is slightly noisy when starting| It is a normal phenomenon.|
The noise will be less after the compressor works stably.
Code Fl displayed| This is the protection mode of low car voltage| Set the
battery protection button from H to M or from M to L
---|---|---
Code F2 displayed| This is the protection mode of overloaded fan| Turn the
refrigerator off and restart it after 30mins.
Code F3 displayed| This is the protection mode of the frequent working
compressors.| Turn the refrigerator off and restart it after 30mins.
Code F4 displayed| It means the compressor is overloaded or working at a low
speed.| Turn the refrigerator off and restart it after 30mins.
Code F5 displayed| This is the protection code of the overheated compressor
module.| Move the refrigerator to a ventilated area turn it off and restart it
after 30mins
Code F6 displayed| No parameter can be detected by the controller.| Please
restart it. If the code shows again, please contact with after-sale workers.
Code F7 or F8 displayed| This is the erroneous protection code of the
temperature sensor.| Please check the sensor terminal.
Technical Data
Mode | TWW75 |
---|---|
Rated Voltage | DC12/24V AC100-240V(using dedicated adapter) |
Power Consumption | 90W |
Capacity | 75L/2.7 cu.ft |
Noise Emission | C.45dB |
Climate Class | T/ST/N/SN |
Temperature Range | -20–+20°C (-4–+68°F) |
Dimensions | 93.753.546.5(cm) |
36.8921.0618.31(inch)
Weight| 25.65kg/56.55Ib
*Due to product improvement, the technical data might be different from actual data, please refer to the rated label on the product.
Thank you for purchasing the BODEGA COOLER product.
We sincerely hope that you are satisfied with the product.
We’d like to offer you 24—a month’s warranty for free. Once activated the
warranty, you will be ensured that if anything goes wrong with your product.
Replacement unit/parts will be warranted during the warranty period.
What you need to do
Any help or questions during use, please contact us via website
www.bodegacooler.com, send an email to
info.@bodegacooler, we will serve you within 24 hours. When contacting us, we
suggest sending the Order ID, problem, and a photo or a video for helping us
much more clearly about the problem and offer you the best solution.