BODEGA TWW75 Car Fridge User Manual

BODEGA TWW75 Car Fridge

Safety Instructions

To prevent damage to your product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. This icon marks warnings. Failure to obey these warnings could result in the malfunction of your fridge and possible injury for yourself and other users.

• Do not expose your fridge to heat and direct sunlight.
• Do not place in humid places to avoid leakage or electric shock.
• Do not put any electrical devices inside the fridge as they could damage the fridge.
• Do not soak the fridge into water or expose it to rain.
• Do not upside down for drainage
• Do not block the gaps of the fridge with things like pins, wires, etc.
• Do not allow children to play on or in fridge.
• Do not use the fridge if abnormalities are noticed such as smoke, overheating, leakage etc.
• Do not let other technicians to repaired the malfunction fridge, except the staff from our company.

Notices

• Use wet cloth to clean your fridge before use .
• Make sure the voltage is within the proper range for the socket and cable being used.
• The fridge should be unpacked and stand still for more than 6 hours before switching on the power
• Make sure the refrigerator stays horizontally when it is working. The tilt angle should be less than 5° in long run and be less than 45° in short run.
• The fridge needs some space for good ventilation to work properly, at lease 200mm at the back and 100mm at side.
• The installation of the DC power source in a boat should be handled by qualified technician.
• Please contact us for maintenance if your fridge gets malfunctions.

Product Features

• High efficiency DC compressor and module which is robust and durable.
• Fast cooling to -20°C/-4° F (based on 25°C/77° F room temperature).
• 3- stage low voltage battery protection.
• CFC free and low energy consumption.
• DC12V/24Vor AC 100~240V (with adapter) power supply.
• Robust wheels and stretchable handle
• Invertible door for installation
• Dual-zone for cooling and freezing.
• LCD display for temperature setting.
• APP control via Bluetooth

Product Structure

Operating Panel& APP

• USB port is not equipped for all modes.
• APP control is not equipped for all modes.
• A built-in battery is equipped for internal battery type.
• Product features are subject to real purchase.

APP Connection Operation:

Please scan the corresponding QR code shown as below to download the APP O “Car Fridge Freezer” from App Store or Google Play, then open the Bluetooth and the downloaded APP to search the fridge equipment, you will hear “Tick” sound, meanwhile, there will be “AP” shown on the fridge display panel. Press the setting button on the fridge to connect your mobile. By connecting the smart car refrigerator through the APP, you can check the temperature of the refrigerator, voltage and other information, as well as setting the temperature and cooling mode, etc.

Function and Setting

• Display Screen Initialization: Connecting with electricity, the buzzer rings and the display screen lights up for 2 seconds, being into normal operation mode. 
• Power Supply: Can be connected with DC 12/24V or AC 100~240V (with adapter).
• Power On/Off: press button to switch ON, long press button for three seconds to switch OFF.
• Temperature Setting: Press the button ” +” or ” -” until the figure on the screen begins flashing, then you can adjust the temperature by “+” or ” -“. If you stop holding the button for 4 seconds, the setting will be finished and the setting temperature will be saved. (Note: the displayed temperature is the current temperature of chambers. If set temperature is much higher or lower than original temperature, displayed screen would not present the set temperature immediately until chambers reach the set temperature.)
• Cooling Mode Control: Press the button to select cooling mode. You can switch mode between MAX (Quick cooling mode} and ECO (Economical mode).
• Battery Protection Mode: Hold the button over 3 seconds, the LCD screen will flash, then you can select L{Low), M (Medium), H (High) mode for your battery protection. The default setting is H mode. When the fridge is powered by car battery, it is recommended to set H mode. When the fridge is powered by built-in battery or portable battery, it is advised to set M or L protection mode. The reason is that various cars have different output voltage. If battery protection occurs (screen displays Fl), the protection mode should be adjusted from H to M or L. When the engine is switched off, the fridge is still able to work. Protection mode should be set to H to prevent car battery from exhaustion.
• Temperature Unit Setting: press switch off the fridge, then press over 3 seconds until El shows on the screen. Press “O” from El, E2 …… switching to ES. When the screen flashes, press “+” or ” -” to change the unit between Centigrade (0C) and Fahrenheit {°F).
• Reset: Power off the fridge, holding the setting button until El is displayed on the screen. Hold the button “+” and ” -” until the screen lights up as follow:

Cleaning and Storage

Cleaning:

1. Please unplug the fridge first to avoid electric shock.
2. Do not soak the fridge in water and do not wash it.
3. Remove the cover and drain from the hole.
4. Use wet cloth to clean the fridge and dry it.

If you do not use the refrigerator for a long time, please follow the instruction:

1. Turn off the power and remove the plug.
2. Remove the items stored in the refrigerator.
3. Absorb all the water in fridge with dry cloth.
4. Place the fridge in a cool and dry place.

Troubleshooting

Code Fl displayed

| This is protection mode of low car voltage| Set the battery protection button from H to M or from M to L
---|---|---

Code F2 displayed

|

This is the protection mode of overloaded fan

|

Turn the refrigerator off and restart it after 30mins.

Code F3 displayed

|

This is the protection mode of frequent working compressor.

|

Turn the refrigerator off and restart it after 30mins.

Code F4 displayed

| It means compressor is overloaded or working at a low speed.|

Turn the refrigerator off and restart it after 30mins.

Code FS displayed

| This is the protection code of overheated compressor module.|

Move the refrigerator to a ventilated area, turn it off and restart it after 30mins

Code F6 displayed

| No parameter can be detected by the controller.|

Please restart it. If the code shows again, please contact with after-sale workers.

Code F7 or FS displayed| This is the erroneous protection code of temperature sensor.|

Please check the sensor terminal.

Technical Data

Dimensions

| 535462826 (20.918.232.5″)| 571462896 (22.518.235.3″)
Weight| 24.Skg/54lbs| 26.5kg/58.4Ibs

Due to product improvement, the technical data might be different from actual data, please refer to the rated label on the product.

WARRANTY CARD

Dear customer,
Thank you for purchasing our BODEGA products, which has been made to meet high quality standards. The manufacturer’s warranty covers the product against manufacturing defects for a period of 12 months from the date of purchase. All BODEGA warranties are automatically kept tracking in our system, so there is no need to register your product. For an extra 6-month free of charge warranty, please register at website www.bodegacooler.com or fill in following Warranty Card, take picture and send to info@bodegacooler.com.
If you have any problems during using process, please contact us via info@bodegacooler.com. We will reply you within 24-hour and provide you the technical support.We do make every effort to ensure you are 100% satisfied.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>