niceboy Party Boss 2 200 Party Speaker User Manual

: June 14, 2024
: niceboy

Table of Contents

niceboy Party Boss 2 200 Party Speaker
POWER AND CHARGING
PRODUCT DESCRIPTION
TOP PANEL
PACKAGE CONTENTS
SPECIFICATION
SAFETY INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

niceboy Party Boss 2 200 Party Speaker

POWER AND CHARGING

Plug the supplied cable into the socket (4) on the rear panel of the speaker.
If the speaker is connected to the mains, the built-in battery will start charging.
battery charging is indicated by the light on the display (16).

TURNING ON

Turn the main volume knob on the top panel (8) to the left.
Connect all input devices and instruments you will use.
Hook the penny into the hook on the top panel (6). The speaker is now in BT mode. After pr- Depending on the mode you will be using, you can slowly increase the volume.

PRODUCT DESCRIPTION

TOP PANEL

LED on/off button him.
Microphone inputs
AUX input 3.5 mm
Loading port
USB/SD input ports
Power button
Microphone volume
Main volume
Light: A short press changes the lighting mode (from LED 1 to LED 10) and turns on the light.
REC – Record sound via microphone to USB flash drive/Micro SD card.
Echo- / Echo+: Use these buttons to set the microphone echo effect.
REPEAT: Repeats a single track or loops a track from US/Micro SD memory.
Play/Pause button: Press this button to pause or resume audio playback in USB/SD and Bluetooth mode.
TWS: A second press in Bluetooth mode activates the wireless stereo mode of two speakers. Niceboy PARTY Boss 2 players.
Previous/Next buttons: During USB/SD and Bluetooth playback, use these buttons to to go to the previous or next track.
MODE button: press to switch between input modes: Bluetooth, USB / SD / FM input and AUX. Press and hold the “MODE” button to mute the voice prompt. (U-OFF”: voice prompt plaster angles cut out; “U-ON”: news reports posted)
BLUE: Switch directly to Bluetooth mode.
LED display (front of the device)
Mega bass: This button boosts the low frequencies to increase bass response.
Menu Button: Press to access Bass(-07~07), Treble adjustment (-07~07), EQ (EQ01-EQ06) and microphone volume.
Press the “MENU” button, the LED display will show “B / T / V / EQ”:
B” stands for bass control. When you see “B” and turn the master volume knob +/-, the effect
BASS can be adjusted from “-07” to “07”
“T” stands for treble control: when you see “T” and turn the master volume knob +/-,
The treble/mid frequencies can be adjusted from “-07” to “07”.
“V” stands for volume, and the volume can be adjusted from “0” to “60”.
“EQ” means equalizer: EQ01-EQ06

REMOTE

Before using the controller, open the bottom cover and insert it AAA batteries included.

Mute: Option to mute in any mode.
Previous track
In USB/TF mode (Micro SD card) – previous path In Bluetooth play mode – previous song. In FM mode – previous channel.
MODE: Short press to enter Bluetooth mode AUX/USB/SD.
A second press mutes the voice prompt Recording function In USB/SD mode, press the “REC” button to record songs to a USB/Micro SD card.
Echo – Reduces the echo effect.
BASS + / – Adjusts the bass effect.
EQ function – EQ1 – normal, EQ2 – rock, EQ3 – fashion, EQ – 4-class, EQ5- Country, EQ6- Jazz
Microphone volume +/-
POWER
Wstrzvmai | Play
Next song In USB/SD mode – next song In BT mode – next song In FM mode – next channel
Lighting mode switch A short press changes the lighting mode (from LED 1 to LED 10) and brings out light.
REPEAT: Repeat a single track or loop of a song on a USB/SD drive.
Playing the recording
Deleting a record
Echo + 7greater echo effect
Microphone Priority – If the button is enabled, it gives priority to the microphone, muting it zyke when speaking into the microphone. Gay this preamplifier is turned off, the volume is played music remains unchanged.
Treble + / – Sets the treble effect.
Master volume
Number buttons
In USB/TF (Micro SD card) mode to select songs.
In FM mode, to select automatically stored stations.

BT MODE

After connecting, the socket automatically switches to BT mode. In case the penny is lit another mode, switch it to bluetooth mode by briefly pressing the MODE button (14). BT pairing mode is indicated on the display by a flashing BLUE sign.
Activate Bluetooth on your device. Then, from the list of available devices, select “Niceboy PARTY Boss 2 200W.
The device rotates, with a loudspeaker. Successful pairing will be confirmed by a signal sound and display, the word BLUE lights up steadily.
After turning on the speaker again, it will automatically connect to the last paired speaker device.

AUXILIARY MODE

The penny must be paid.
Connect a 3.5 mm jack cable to the audio INPUT input (3).
Turn on the loudspeaker and then briefly press the MODE button (14) to switch to AUX mode.
AUX mode is indicated on the display by the word LINE.
You can adjust the sleeping strength by folding the side panel.

USB MODE

After connecting the USB drive to the USB port (5), the speaker automatically switches to the appropriate mode mode. This is indicated by the word USB on the display.
Start or pause the song by briefly pressing the PLAY button (13). Volume regular- is turned on using the VOLUME knob (8) on the top panel. Briefly press the buttons NEXT and PREV (13) to go to the next or previous track. The device supports data carriers with a maximum capacity of 32 GB and MP3 and WAV audio formats.

The USB socket can also be used as an output power supply. The speaker therefore serves as a power bank.

SD CARD MODE

After connecting the SD card to the TF CARD slot (5), the loudspeaker automatically switches according to nor mode. This is indicated on the display by the word SD.
Start or pause the song by briefly pressing the PLAY button (13). Volume re-is adjusted using the VOLUME knob (8) on the top panel. Short press the NEXT buttons and PREV (13) skips to the next or previous track.

The device supports data carriers with a maximum capacity of 32 GB and audio formats MP3 and WAV.

FM RADIO MODE
Place the loudspeaker in an open area so that the radio signal is sufficient. The speaker is equipped with an integrated antenna.

Search for FM radio mode by briefly pressing the MODE button (14). This is indicated on the display FM station number, e.g. 90.3.
Briefly press the PLAY button (13) to start searching for available stations. The device automatically saves found stations on default channels.
Once scanning is complete, you can cycle through FM stations using the buttons NEXT and PREV (13), or using the numeric buttons on the remote control.

TWS MODE
Using True Wireless (TWS) technology, you can connect two Niceboy PARTY Boss 2 speakers 200W and play music at the same time.

Connect both terminals and make sure they are not connected to any Bluetooth device (phone mobile phone, laptop, etc.).
Press and hold the TWS button (13) for 3 seconds on the control panel of one of the speakers. numbers to pair with the second speaker. “tUS” will appear on the display. After successful pairing, you will now hear sound from the main speaker and the second speaker.
Open the Bluetooth settings on your device. Then select from the list of available devices “Niceboy PARTY Boss 2 200W”. The successful pairing will be announced with an acoustic signal. After If you turn off or change the playback mode, grosniki will automatically play.

WIRELESS MICROPHONE

Remove the bottom cover of the microphone and remove the included AA batteries. Screw the cap back on and turn on the top of the microphone to turn it on. The microphone will automatically connect to the powered one loudspeaker. Use the MIC knob to adjust the microphone volume. VOL. (7) You control the echo effect, by briefly pressing the ECHO+, ECHO- buttons.

RECORDING
When rolling up a wireless or wired microphone or instrument
Music pre-microphone inputs can record vocals/musical instruments to a USB drive or SD memory card. The media must contain at least one audio file in mp3 or WAV format to the device can detect it.

Unplug the speaker and connect other instruments to the MIC.IN or GT.IN inputs.
Turn on the speaker.
Take the USB drive or SD card to the appropriate USB or TF CARD slots.
The speaker will switch to the appropriate storage mode.
Briefly press the REC button to start recording the audio track. The recording is signalled lysed on the display by REC.
End recording with a long press on the REC button.

PACKAGE CONTENTS

Niceboy PARTY Boss 2 200W speaker
Power cable
Wireless microphone
Remote
2x AA batteries
2x AAA batteries
Instructions for use

SPECIFICATION

BT version: 5.0
Frequency band: 2.4 GHz
Radiofrequency power: ≤ 2.5 mW
RMS power: 200 W
Power supply: 100V-240V, 60/50Hz
Battery: 4.5Ah 12V
Loading time: 4 hours
Durability: 8 hours
Woofer: 2×8″
Frequency range: 50Hz – 18kHz
Impedance: 40, ‡10%
Chutosé: 88 dB, +2 dB
Tweeter: 1×2″
Frequency range: 3KHz – 18kHz
Impedance: 8 , ‡15%
Chutosé: 85 dB, ‡3 dB
Microphone: wireless, directional
Frequency: 40 Hz – 15 kHz
Impedance: 10 k / 1 kHz
Sensitivity: 5dB

SAFETY INFORMATION

Listening to music at too high a volume can cause damage. Do not expose the device to liquids or moisture.
Do not expose the device to temperatures too high or too low. Do not attempt to dismantle it. Protect your device against sharp objects and falls from height.
Batteries – incorrect handling (long charging, short-circuiting, destruction as a result of using another object, etc.) may cause fire, battery overheating or electrolyte leakage.
The shelf life of the battery or accumulator that may be included with the product is six months because these are consumables.
For a radio device that intentionally transmits radio waves, instructions and information safety information include information on all frequency bands in which a radio device, and the maximum radio frequency power transmitted in the band frequency at which the radio device operates.
NICEBOY s.r.o. hereby declares that the radio device type NICEBOY PARTY BOSS 2 — 200W complies with Directives 2014/53/EU, 2014/30/EU, 2014/35/EU and 2011/65/EU. Full the text of the EU Declaration of Conformity is available on the following websites: https://niceboy.eu/en/declaration/party-boss-2-200w

INFORMATION FOR USERS REGARDING THE DISPOSAL OF ELECTRICAL EQUIPMENT AND ELECTRONIC (HOUSEHOLDS)
The symbol on the product or in the accompanying documentation indicates that the equipment is used for electrical or electronic equipment and must not be disposed of with municipal waste. To properly dispose of the equipment, take it to a designated collection point where it will be disposed of and collected free of charge. Correct disposal of the product helps conserve valuable natural resources and supports processes to prevent potential negative effects on the environment and health of human beings that could occur in the event of incorrect waste disposal. For more information, please contact your local authority or nearest collection point. Incorrect disposal of this type of waste may result in fines under the provisions of the writings of a given country. Information for users on the disposal of electrical equipment and electronics. (Companies and enterprises) For the correct disposal of electrical equipment and electronic equipment used by companies and enterprises, please contact the manufacturer or product importer. They will provide you with information on how to dispose of the product, and where appropriate from the date the electrical device is placed on the market, will inform who is responsible for the obligation financing the disposal of electrical equipment. Disposal information in other countries outside the European Union. The above symbol is only valid in European Union countries. To for detailed information on the disposal of electrical and electronic equipment, please contact the appropriate authorities in your country or the equipment seller.

MANUFACTURER