BODEGA ‎TWW95-WF 12 Volt Car Refrigerator, Car Fridge Dual Zone User Manual

User Manual
Brand:BODEGA

TWW75/TWW95
OC 12V/24V AC100-240V
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY
RETAIN THIS MANUAL FOR FUTURE REFERENCE

‎TWW95-WF 12 Volt Car Refrigerator, Car Fridge Dual Zone

Quick Guidelines
QO This icon marks references to other pages in this manual.

First Step: connect with 12/24V DC or 100-240V AC (with adapter) power, Second Step: press” C) “to switch ON, long press” ‘ ” for 3 seconds to switch OFF.
Third Step: press “+” or ” -” to adjust temperature. ( LIJ 6)
Cooling Mode: press “(” to switch cooling mode between MAX (fast cooling) and ECO (Economical).  Battery Protection Mode: hold “(” over 3 seconds until screen flashes, then press “p” again to select battery protection mode.( LIJ 6)

Temperature Unit Setting: default setting is centigrade °C. If you want to change to Fahrenheit°F, please refer to LJ6.

Manufacturer:Foshan Alpicool Electric Appliance Co., LTD.
Address:13A Xinlong Road Shiongliyue industrial Zone, Xintang Village, Lunjiao Town,Shunde District, Foshan City, Guangdong, China
Contact:Tracy Tel:+8618680277793 E-Mail:logisticOl@iaobosi.com

Safety Instructions

To prevent damage to your product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
W icon marks warnings. Failure to obey these warnings could result in malfunction of your fridge and possible injury for yourself and other users.

• Do not expose your fridge to heat and direct sunlight.
• Do not place in humid places to avoid leakage or electric shock.
• Do not put any electrical devices inside the fridge as they could damage the fridge.
• Do not soak the fridge into water or expose it to rain .
• Do not upside down for drainage
• Do not block the gaps of the fridge with things like pin, wire, etc.
• Do not allow children to play on or in fridge .
• Do not use the fridge if abnormalities are noticed such as smoke, overheating, leakage etc.
• Do not let other technicians to repaired the malfunctional fridge, except the staff from our company.

(D Notices

• Use wet cloth to clean your fridge before use.
• Make sure the voltage is within the proper range for the socket and cable being used.
• The fridge should be unpacked and stand still for more than 6 hours before switching on the power
• Make sure the refrigerator stays horizontally when it is working. The tilt angle should be less than 5° in long run and be less than 45° in short run.
• The fridge needs some space for good ventilation to work properly, at lease 200mm at the back and 100mm at side.
• The installation of the DC power source in a boat should be handled by qualified technician.
• Please contact us for maintenance if your fridge gets malfunctional.

Product Features

• High efficiency DC compressor and module which is robust and durable.
• Fast cooling to -20°C/-4° F (based on 25°C/77° F room temperature).
• 3-stage low voltage battery protection.
• CFC free and low energy consumption.
• DC12V/24V or AC 100-240V (with adapter) power supply .
• Robust wheels and stretchable handle
• Invertible door for installation
• Dual-zone for cooling and freezing .
• LED display for temperature setting.
• APP control via Bluetooth

Product Structure

Function and Setting

• Display Screen Initialization: Connecting with electricity, the buzzer rings and the display screen lights up for 2 seconds, being into normal operation mode.

• Power Supply: Can be connected with DC 12/24V or AC 100-240V (with adapter).

• Power On/Off: press S to switch ON, long press O for three seconds to switch OFF.

• Temperature Setting: under the running state, long press+ and Oat the same time for three seconds to switch ON/OFF the left compartment, long press – and Oat the same time for three seconds to switch ON/OFF the right compartment, two compartments cannot be switched off at the same time.
  When both left and right compartments are set in running state, press+ or – to enter left compartment temperature setting, press+ to increase temperature, press- to decrease temperature, and press Oto switch left/right compartment. The setting will be saved after stop operating for four seconds(Note: the temperature displayed is the current temperature of the compartments, it’ II take a while to reach the set temperature.)
  Temperature setting range: -20-20C (-4-68F)

• Cooling Mode Control: Press the button O to select cooling mode. You can switch mode between MAX (Quick cooling mode} and ECO (Economical mode).

• Battery Protection Mode: Hold the butto n over 3 seconds, the screen will flash, then you can select L(Low), M (Medium), H (High) mode for your battery protection. The default setting is H mode. When the fridge is powered by car battery, it is recommended to set H mode. When the fridge is powered by built-in battery or portable battery, it is advised to set M or L protection mode. The reason is that various cars have different output voltage. If battery protection occurs (screen displays F1), the protection mode should be adjusted from H to M or L. When the engine is switched off, the fridge is still able to work.
  Protection mode should be set to H to prevent car battery from exhaustion.

• Temperature Unit Setting: press C) to switch off the fridge, then press O over 3 seconds until El shows on the screen. Press ( from El, E2 switching to ES. When
  the screen flashes, press + or – to change the unit between Centigrade (C) and Fahrenheit (°F).

• Reset: Power off the fridge, holding the setting button O until El is displayed on the screen. Hold the button+ and – until the screen lights up as follow:

APP Connection

https://a.smart321.com/qzsmart

Scan the QR Code with your smartphone or search it in the APP Store or Google Play to download the “QZsmart” app.

PREPARATION BEFORE USE:

1. Make sure your car fridge is on and ensure that your smartphone is connected to 2.4 GHz Wi-Fi network.
   NOTE: This device works only on 2.4 GHz Wi-Fi® network.

2. Ensure that the Bluetooth function of the mobile phone is enabled at the same time; otherwise, the device cannot be automatically searched.

3. Download the QZsmart app from the App Store or Google Play™.
   NOTE: Authorize the app to access network and location services.

4. If you are using the app for the first time, click the “Sign up” button and register. If you already have an account, click the “Log in” button.

5. For better WIFI connection, please reset the product WIFI before using it for the first time.
   You can disconnect the connection by turning off the switch of the refrigerator and simultaneously long pressing+ and – on the control panel of the refrigerator for 3 seconds and hearing one beep.

Add Device

1. From the Home Page, press “Add Device” or press in the top right corner of the screen.
   (If you already have a device added to your account, the “Add Device” button will not appear).

2.  Connecting

• Auto-connect:(Featured First)
  The app will automatically search when Wi-Fi and Bluetooth are switched on, so you can add the corresponding product directly from the automatic search.
  Step 1:Press “Add Device” or press”+
  Step 2:When the device is found, press Add. The Bluetooth function must be enabled during this process.
  Step 3:Select your Wi-Fi network. (Be sure to use a 2.4G network)
  Step 4:Enter your router password.
  Step 5:Wait for connection and click “NEXT”.
  Step 6:Once the device is added, you can use the menu to change the name and location of the device.
  Step 7:When you are finished, click “Done”.

• Manual connection: Select your model from the device menu.
  Step 1:Press “Add Device” or press”+
  Step 2:Select the corresponding product type and click the product diagram of the corresponding model.
  Step 3:After the product is shut down, press” Next”.
  Step 4: Long pressing “-“and”-” on the control panel of the refrigerator for 3 seconds and
  hearing one beep, Press “Next”.
  Step 5:Select your Wi-Fi network. (Be sure to use a 2.4G network)
  Step 6:Enter your router password.
  Step 7:Click “Confirm.” The next screen will say “Connect your mobile phone to the device’s hotspot.”
  Step 8:Click “Go to connect.” This will take you to your phone’s settings (or Wi-Fi list for Android).
  Step 9:Select “SmartLife-XXXX.”
  Step 10:Navigate back to the QZsmart App.
  Step 11:Click “Next.” Your smartphone will automatically connect.
  Step 12: Once the device is added, you can use the menu to change the name and location of the device.
  Step 13:When you are finished, click “Done.”

• Follow the APP interface, there are detailed operation reminders in the APP interface, you need to follow the steps one by one.
  NOTE: Connection may take up to 60 seconds.
  Once the device is added, you can use the menu of the app to change the name of the device.
  When you finished, press “Done”.
  NOTE: Your mobile device is connected to a 2.4GHz Wi-Fi network when pairing with the app.
  Please select the 2.4GHz network when selecting a Wi-Fi network on the app during setup.

Using the My App
The main interface can control the temperature of 2 compartments respectively; Set up the “LOCK”; Refrigerator switch.
Click on “more features” in the lower right corner to set the switch of temperature unit, cooling mode, battery protection mode and refrigerator compartment.
How to unbind
A car refrigerator can only be connected to one mobile phone.
First method: You can disconnect the connection by turning off the switch of the refrigerator and simultaneously long pressing + and – on the control panel of the refrigerator for 3 seconds and hearing one beep.
Second method: Removing connection with the app: Open the app and go to the device page.Click ” El ” in the upper right corner, and then click “Remove Device” at the bottom.
Cautions
There will be a delay in operating the machine on the mobile phone, about 1-3 minutes, please be patient.
The language of the APP automatically switches with the language of the mobile system.
You can lock or unlock the control panel on the refrigerator by operating the APP lock icon.
Please note that if you want to lock the refrigerator, please control it through the APP, the operation panel of the refrigerator does not have the function of locking and unlocking.
This product includes WIFI plus Bluetooth function. Bluetooth function can be used in non-wifi environment. If you need to use Bluetooth function, please be sure to connect WIFI, successfully for the first time. (Again, you must connect to WIFI first, otherwise you will not be able to use Bluetooth in non- wifi environments.)

Cleaning and Storage

■ Cleaning:

1. Please unplug the fridge first to avoid electric shock.
2. Do not soak the fridge in water and do not wash it.
3. Remove the cover and drain from the hole.
4. Use wet cloth to clean the fridge and dry it.

■ If you do not use the refrigerator for a long time, please follow the instruction:

1. Turn off the power and remove the plug.
2. Remove the items stored in the refrigerator.
3. Absorb all the water in fridge with dry cloth.
4. Place the fridge in a cool and dry place.

Troubleshooting

is
malfunctioned or not.
•Check whether the plug and socket are connected well.
•Check whether the fuse has been burnt or not.
•Check if the switch is on or not.
Food is frozen| The setting temperature is too low| Increase the setting temperature
Water flowing sound is inside the refrigerator| It is a normal phenomenon.| It is the flowing sound of refrigerant which is normal.
There are water drop around the refrigerator casing or door gap| It is a normal phenomenon.| When moisture in the air meets the lower temperature refrigerator casing. it will naturally become liquefied and
condensed to be water drops. That is a normal phenomenon.
The compressor is slightly noisy when starting| It is a normal phenomenon.| The noise will be less after the compressor works stably.
Code Fl displayed| This is protection mode of low car voltage| Set the battery protection button from H to M or from M to L
Code F2 displayed| This is the protection mode of overloaded fan| Turn the refrigerator off and restart it after 30mins.
Code F3 displayed| This is the protection mode of frequent working compressor.| Turn the refrigerator off and restart it after 30mins.
Code F4 displayed| It means compressor is overloaded or working at a low speed.| Turn the refrigerator off and restart it after 30mins.
Code FS displayed| This is the protection code of overheated compressor module.| Move the refrigerator to a ventilated area, turn it off and restart it after 30mins
Code F6 displayed| No parameter can be detected by the controller.| Please restart it. If the code shows again,
please contact with after-sale workers.
Code F7 or F8 displayed| This is the erroneous protection code of temperature sensor.| Please check the sensor terminal.

Technical Data

367/8 21 1/16
18 5/16inch| 1005571465mm
399/1622 1/2
‘185/1.6inch
NET WEIGHT| 25.65kg/56.551b| 28kg/61.71b

Due to product improvement, the technical data might be different from actual data, please refer to the rated label on the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>